StarTech.com H2MPV-MONITOR-MOUNT Handleiding

StarTech.com Flat panel steun H2MPV-MONITOR-MOUNT

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com H2MPV-MONITOR-MOUNT (8 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
For additional self-service support options and community forums, please visit: www.StarTech.com/support
Revision: October 24, 2024
Quick-Start Guide
Product ID
H2MPV-MONITOR-MOUNT
Dual Monitor Desk Mount - Single Heavy-Duty Pole - Up to 49” 32:9 Monitors
Feature Function
1VESA Plate
Use to mount a onto the Monitor Monitor Mount
Features a design for mounting and Quick-Release
unmounting of the Monitor
2Monitor Mount Secures the along the Monitor Pole
3Pole Cap Enables to pass-through into the Cables Pole
Composed of two halves that are press tted onto the Pole
4Support Collar
Supports the weight of the while adjusting the Monitor
Monitor Mount Pole around the
secure it into place Set Screws
Note: The Support Collar is not meant to solely support the
Monitor weight
5Monitor Mount Lever Use to tighten or loosen the Monitor Mount
6Cable Pass-Through Hole Route cables through the for Pole Cable Management
7Pole Assembly
Enables to vary the height of the Monitors
A single assembly composed of the and Pole Desk Clamp,
Upper
8Desk Clamp, Lower
Secures the to a desk or tableMonitor Desk Mount
Adjustable height to match the thickness of the desk or table
Supported thickness range of 1to 3.9-inch (25 to 100mm)
Package Contents
Desk Clamp, Lower ( ) x 1A
Pole Assembly ( ) x 1B
Pole Cap ( ) x 1C
Monitor Mount ( ) x 2D
VESA Plate ( ) x 2E
Support Collar ( ) x 2F
M4x10mm Screws ( )x 8G
M4x16mm Screws( ) x 8H
3/8” x 1/2” Screws ( ) x 2I
Spacers ( ) x 8J
M6 Hex Key ( ) x 1K
M3 Hex Key ( ) x 1L
Wrench ( ) x 1M
*Product may vary from image
1
8
3
5
2
6
2
6
7
1
4
5
4
Quick-Start Guide
Quick-Start Guide x 1
Requirements
For the latest manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/H2MPV-MONITOR-MOUNT
Max weight of 33lb (15kg) per VESA mount
Monitor with compatible VESA mounting hole pattern of 75x75 or 100x100mm
Display size up to 49” ultrawide (32:9) or 28” (16:9) widescreen x 2
WARNINGS!
StarTech.com Ltd. is not responsible for any property damage and/or personal
injury resulting from the installation procedures outlined in this technical
document
Read the entire manual and ensure the instructions are fully understood
before assembling and/or using this product. Failure to do so might result in
personal injury or property damage
Do not exceed the weight capacity of this product. Overloading this product
might result in personal injury or property damage
The weight capacity of the Monitor Mount: 33lb (15kg) x 2
Never operate this product if parts are missing or damaged
The Support Collars must not be solely used to support the weight of the
mounted Monitors indenitely. Once the Monitors have been suitably
positioned, the Support Collar screws and the Monitor Mount Levers must
be both adequately tightened to support the Monitors’ weight. During
installation or repositioning of the monitors about/along the pole, always,
with the aid of a second person, verify that the Support Collars and/or Monitor
Mounts will support the monitors’ weight before releasing them
Do not over-tighten the M4 Screws. If resistance is encountered, stop
tightening. Failure to do so, could result in damage to the Monitor(s)
Assembly
1
2
3
K
I
A
B
LF
F
D
L
D


Product specificaties

Merk: StarTech.com
Categorie: Flat panel steun
Model: H2MPV-MONITOR-MOUNT

Heb je hulp nodig?

Als je hulp nodig hebt met StarTech.com H2MPV-MONITOR-MOUNT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Flat panel steun StarTech.com

Handleiding Flat panel steun

Nieuwste handleidingen voor Flat panel steun