StarTech.com FCREADU3C Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com FCREADU3C (2 pagina's) in de categorie Geheugenkaartlezer. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Instruction manual
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 08/09/2016
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/FCREADU3C.
Package contents
1 x multi-card reader and writer
1 x instruction manual
System requirements
microSD™ card, SD™ card, or CompactFlash® card
Computer, tablet, or device enabled with a USB Type-C™ port
The FCREADU3C is OS independent and doesn’t require any
additional drivers or software. The FCREADU3C receives enough
power through the USB bus and doesn’t require an additional power
source.
System requirements are subject to change. For the latest
requirements, please visit www.StarTech.com/FCREADU3C.
FCREADU3C
USB 3.0 Flash Memory Multi-Card Reader/Writer with USB-C
*actual product may vary from photos
Introduction
The FCREADU3C provides a quick and easy way to access data stored
on dierent types of media cards, and supports data transfers at
speeds up to 5Gbps. You can use this card reader with a computer,
tablet, or device that’s enabled with a USB-C™ port.
Product diagram
SD card slot microSD card slot
CompactFlash card slot
USB-C plug
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
oers speeds up to 5Gbps.
Note: Data transfer rates are dependent upon the speed of the
memory card you are using and the speed capabilities of the USB
port on your host device.
Card support
The FCREADU3C supports the following types of memory cards:
microSD, microSDHC™, microSDXC™
CompactFlash Type I and Type II card
Secure Digital (SDSC), Secure Digital eXtended Capacity (SDXC™)
card, Secure Digital High Capacity (SDHC™) card
Use the FCREADU3C
1. Gently slide a memory card into the appropriate card slot on the
FCREADU3C until you feel resistance and the card is fully inserted.
2. Insert the on the USB card reader into the USB port USB-C plug
on your computer, tablet, or device.
3. To access content on the USB card reader, follow the instructions
specic to the OS that youre running.
Note: Avoid inserting multiple cards into the card reader at the same
time. You can only access data stored on one card at a time.
Troubleshooting
I can’t access the data stored on my cards
If you’re experiencing issues when you try to access the data stored
on your memory card, consider the following:
Some operating systems may not support all le formats. Make
sure that the operating system you’re using supports the type of
memory card and the les that you’re trying to access.
If you insert multiple memory cards into the FCREADU3C, you
won’t be able to access the data stored on the cards at the same
time. Make sure that you only insert one memory card in the card
reader.
Note: The FCREADU3C prioritizes card access based on the most
recent memory card that was inserted.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.coms lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.


Product specificaties

Merk: StarTech.com
Categorie: Geheugenkaartlezer
Model: FCREADU3C
Kleur van het product: Zwart, zilver
Gewicht: 68 g
Breedte: 64 mm
Diepte: 68 mm
Hoogte: 14 mm
Gewicht verpakking: 104 g
Breedte verpakking: 129 mm
Diepte verpakking: 104 mm
Hoogte verpakking: 31 mm
Materiaal behuizing: Aluminium, Plastic
Compatibele geheugenkaarten: CF, MMC, MicroSD (TransFlash), MicroSDHC, MicroSDXC, SD, SDHC, SDXC
Snelstartgids: Ja
Certificering: CE, FCC, RoHS
Plug and play: Ja
Temperatuur bij opslag: -20 - 75 °C
Intern: Nee
Soort aansluiting: USB 3.2 Gen 1 (3.1 Gen 1) Type-C
(Buitenste) hoofdverpakking hoogte: 283 mm
(Buitenste) hoofdverpakking breedte: 272 mm
(Buitenste) hoofdverpakking lengte: 325 mm
Hoeveelheid per (buitenste) hoofdverpakking: 50 stuk(s)
Overdrachtssnelheid: 5000 Mbit/s
Bedrijfstemperatuur (T-T): -20 - 70 °C
Relatieve vochtigheid in bedrijf (V-V): 5 - 90 procent
Code geharmoniseerd systeem (HS): 84719000
Geïntegreerde USB-kabel: Ja
Chips organisatie: Realtek - RTS5309

Heb je hulp nodig?

Als je hulp nodig hebt met StarTech.com FCREADU3C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Geheugenkaartlezer StarTech.com

Handleiding Geheugenkaartlezer

Nieuwste handleidingen voor Geheugenkaartlezer