StarTech.com DUAL-M2-PCIE-CARD-B Handleiding

StarTech.com Niet gecategoriseerd DUAL-M2-PCIE-CARD-B

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com DUAL-M2-PCIE-CARD-B (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 1, 2022 3:41 PM

Product ID

DUAL-M2-PCIE-CARD-B

Component Function

1Full Prole Bracket • Secure the to the PCIe to M.2 Adapter Card

Computer Case

2LED Jumper Pins

• Connect to the LED Lights PCIe to M.2 Adapter

Card Drive to show activity

• LED Lights not included

3Bracket Screws • Secure the to the Full/Low Prole Bracket PCIe

to M.2 Adapter Card

4M.2 Connectors • Connect to the M Keyed M.2 Storage Devices

PCIe to M.2 Adapter Card

5PCIe p1-x8 Connector • Connect the to the PCIe to M.2 Adapter Card

PCIe Slot Computer in a

Standos (x 2),

Stando Installation

Screws (x 2), and Drive

Mounting Screws (x 2)

• Secure to theM.2 Storage Devices PCIe to M.2

Adapter Card

• Compatible (NVMe and AHCI): PCIe M.2 SSDs

2242, 2260, 2280, and 22110 drives

PCI Express p1-x8 to Dual M.2 PCIe SSD Adapter with Bifurcation

Product Information

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit: www.StarTech.com/DUAL-M2-PCIE-CARD-B

Package Contents

• PCIe to M.2 Adapter Card x 1

• Low Prole Bracket x 1

• Quick-Start Guide x 1

• Set of Mounting Screws x 1

Requirements

• Computer x 1

• PCIe p1-x8 or x16 Slot with Bifurcation Support

• Phillips Head Screwdriver x 1

• PCI Express M.2 SSD x 2

• Pliers x 1

Installation

Warning PCIe Cards Installer: can be damaged by static electricity. Ensure that the

is properly grounded before they open the or touch the Computer Case PCIe to M.2

Adapter Card Installer Anti-Static Strap. The should wear an when installing any

computer component. If an is not available, discharge any built-up Anti-Static Strap

static electricity by touching a large for several seconds. Grounded Metal Surface

Only handle the by its edges and do not touch the gold PCIe to M.2 Adapter Card

connectors.

Note: Computer/MotherboardConsult the documentation that came with the for

details regarding how to enable and congure PCIe Bifurcation.

(Optional) Installing the Low Prole Bracket

NOTE: By default the is attached to the Full Prole Bracket PCIe to M.2 Adapter

Card. Depending on your system conguration you may need to remove the Full

Prole Bracket Low Prole Bracket and replace it with the (included).

1. Using a , remove the two securing Small Phillips Head Screwdriver Bracket Screws

the to the . Set the aside as Full Prole Bracket M.2 Adapter Card Bracket Screws

they will be used to attach the .Low Prole Bracket

2. Align the on the with the on the Screw Holes M.2 Adapter Card Screw Holes Low

Prole Bracket Screw Holes ensuring the M.2 Adapter Card is sitting on-top of the

on the .Low Prole Bracket

3. Insert the through the and into the Bracket Screws M.2 Adapter Card Screw Holes

on the .Low Prole Bracket

4. Using the , tighten the , being Small Phillips Head Screwdriver Bracket Screws

careful not to over-tighten them.

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

Use of Trademarks, Registered Trademarks, and other Protected Names and

Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Install the Card

1. Turn o the and disconnect the and any Computer Power Cable Peripheral Devices

that are connected (e.g. printers, external hard drives, etc.).

2. Remove the from theCover Computer Case.

Note: ComputerConsult the documentation that came with the for details about

how to do this safely.

3. Locate an open and remove the corresponding PCIe p2-x8 or x16 Slot Metal Cover

Plate Computer Case Metal Cover Platefrom the rear of the . In most instances, the

is attached to the rear of the with a single . Save Computer Case Phillips Head Screw

this for the next step.Phillips Head Screw

4. Gently insert the into the open and PCIe to M.2 Adapter Card PCIe p2-x8 or x16 Slot

fasten the to the rear of the using the Bracket Computer Case, Phillips Head Screw

from step 4.

5. Replace the from the that was removed in step 2.Cover Computer

6. Reconnect all of the that were disconnected in step 1.Peripheral Devices

7. Reconnect the to the rear of the .Power Cable Computer

Install the M.2 Storage Drives

1. Place the next to the and note the that match Drive Adapter Drive Installation Holes

the length of the . If the and are already installed Drive Standos Installation Screws

in the correct position, proceed to step 5.

2. On the front of the use to hold the in place while M.2 Adapter Card, Pliers Stando

using a to remove the located on the back of the Phillips Head Screwdriver Screw,

Adapter.

3. Use the to remove the on the front of the Phillips Head Screwdriver Screw M.2

Adapter Card.

4. Remove the .Stando

5. Repeat steps 2 - 3 to remove the remaining and Standos Stando Installation

Screws as needed.

6. Install the in the that matches the length of the Stando Drive Installation Hole

Drive.

7. Gently slide the into the corresponding locatedM.2 Drive Connector M.2 Connector,

on the and press the down toward the adapter until the M.2 Adapter Card, Drive

Drive is properly seated

Note: M.2 Connector Drive M Keyed M Keyed M.2 The on the is so that it only ts

Storage Devices

8. Replace the , removed in step 2, and tighten using a Stando Installation Screw

Philips Head Screwdriver.

9. Insert the through the and into the and Drive Mounting Screw Drive Slot Stando

use the to tighten the , securing the Phillips Head Screwdriver Drive Mounting Screw

Drive in place.

10. Repeat Steps 1 - 9 to install the remaining .Drives

Product specificaties

Merk:	StarTech.com
Categorie:	Niet gecategoriseerd
Model:	DUAL-M2-PCIE-CARD-B
Kleur van het product:	Rood
Gewicht:	74 g
Breedte:	102 mm
Diepte:	228 mm
Hoogte:	22 mm
Gewicht verpakking:	192 g
Breedte verpakking:	170 mm
Diepte verpakking:	290 mm
Hoogte verpakking:	30 mm
LED-indicatoren:	Ja
Ondersteunt Windows:	Ja
Temperatuur bij opslag:	-40 - 85 °C
Intern:	Ja
Ondersteunt Linux:	Ja
Snelle installatiehandleiding:	Ja
Mean time between failures (MTBF):	6493014 uur
Hostinterface:	PCIe
Inclusief schroeven:	Ja
Montagebeugels meegeleverd:	Ja
(Buitenste) hoofdverpakking hoogte:	310 mm
(Buitenste) hoofdverpakking breedte:	380 mm
(Buitenste) hoofdverpakking lengte:	500 mm
Hoeveelheid per (buitenste) hoofdverpakking:	30 stuk(s)
Bedrijfstemperatuur (T-T):	-40 - 80 °C
Relatieve vochtigheid in bedrijf (V-V):	15 - 90 procent
Hot-swap:	Nee
Uitbreidingskaartstandaard:	PCIe 4.0
Data transfer snelheid (max):	7.8 Gbit/s
Output interface:	M.2
Ondersteunde storage drive hoogten:	22 mm