StarTech.com CONNLOCKPK10 Handleiding

StarTech.com Niet gecategoriseerd CONNLOCKPK10

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com CONNLOCKPK10 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: July 18, 2019

Product Diagram (CONNLOCKPK)

Part Function

1Steel Cable Tether • Tether to A/V Cables A/V Adapters

2Aluminum Ferrule

• Create a loop by routing the Steel Cable Tether

through each opening

• Crimp to secure the loopSteel Cable Tether

3Heat Shrink Tubing • Shrink around the crimped Aluminum Ferrules

Requirements

• Swaging Tool x 1

• (Optional) Heat Gun x 1

• (Optional) Wire Cable Cutter x 1

For the latest requirements please visit: . www.startech.com/CONNLOCKPK

Installation

1. (Optional) Thread the onto the center of the Heat Shrink Tubing Steel Cable

Tether.

Note: This step is necessary if you plan to utilize the . Heat Shrink Tubing

2. Thread the onto each end of the .Aluminum Ferrules Steel Cable Tether

3. Wrap one end of the around the .Steel Cable Tether A/V Cable

Connectivity Lock - Steel Cable Tether

4. Route the working end of the back into the second hole in the Steel Cable Tether

Aluminum Steel Ferrule.

5. Cinch the until it ts snugly around the .Steel Cable Tether A/V Cable

Note: Do not cinch the down all the way. Cinch the SSteel Cable Tether teel Cable

Tether AV until it is no longer possible to slip the loop over the connectors of the

Cable.

6. Crimp the in the appropriate tting of a . Aluminum Steel Ferrule Swaging Tool

(Figure 1)

Note: It may be necessary to crimp the a few times to create Aluminum Steel Ferrule

a strong and circular shaped crimp.

7. Wrap the other end of the around the cable portion of the Steel Cable Tether A/V

Adapter.

Figure 1

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes

only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to

which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks,

registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related

documents are the property of their respective holders.

Warranty Information

This product is backed by a ve-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

NL: nl.startech.com

IT: it.startech.com

JP: jp.startech.com

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

8. Repeat steps 4 to 6 to secure the to the cable portion of the Connectivity Lock A/V

Adapter. (Figure 2)

9. (Optional) Slide the over the crimped .Heat Shrink Tubing Aluminum Ferrules

10. (Optional) Apply heat to the using a . Always keep Heat Shrink Tubing Heat Gun

the moving to ensure the heat is evenly distributed over theHeat Gun Heat Shrink

Tubing. (Figure 3)

Note: Heat Shrink TubingApply just enough heat to shrink the . Excessive heat will

melt the nylon sheath that covers the . Steel Cable Tether

Removal

• Cut both ends of the using a .Steel Cable Tether Wire Cable Cutter

Note: Ensure the cut is made close to the to prevent any Aluminum Steel Ferrule

damage to the .Cables

Figure 2

Figure 3

Product specificaties

Merk:	StarTech.com
Categorie:	Niet gecategoriseerd
Model:	CONNLOCKPK10
Kleur van het product:	Zwart
Gewicht:	29 g
Breedte:	2.2 mm
Hoogte:	2.2 mm
Gewicht verpakking:	73 g
Breedte verpakking:	220 mm
Diepte verpakking:	200 mm
Hoogte verpakking:	5 mm
Soort:	Kabeltethering
Certificering:	REACH, TAA
Bedoeld voor:	Vloer
Duurzaamheidscertificaten:	RoHS
Aantal per verpakking:	10 stuk(s)
Lengte:	0.3 m
(Buitenste) hoofdverpakking hoogte:	220 mm
(Buitenste) hoofdverpakking breedte:	437 mm
(Buitenste) hoofdverpakking lengte:	490 mm
Hoeveelheid per (buitenste) hoofdverpakking:	160 stuk(s)
Code geharmoniseerd systeem (HS):	85389099
Aantal adereindhulzen:	20 stuk(s)
Aantal krimpkousen:	20 stuk(s)