StarTech.com CBMMCTTOOL Handleiding

StarTech.com Niet gecategoriseerd CBMMCTTOOL

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com CBMMCTTOOL (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 17, 2020 4:13 PM

Product Diagram (CBMMCTTOOL)

Component Function

1Lever • Used to remove excess from a Cable Steel

Cable Tie, after it has been tightened.

2Head • Used to hold a during the Steel Cable Tie

tightening process.

3Nose • Used to align the through the Steel Cable Tie

Head of the .Cable Tie Tool

4Grippers • Used to grip a during the Steel Cable Tie

tightening process.

5Handles • Used to tighten a during the Steel Cable Tie

tightening process.

Requirements

For the latest requirements, please visit www.startech.com/CBMMCTTOOL

• Steel Cable Tie

• Set of Cables

• Safety Gloves

Using the Cable Tie Tool

It is recommended that you put on a pair of before handling the Safety Gloves Steel

Cable Tie.

Metal Cable Tie Tool

1. Wrap a around a set of cables.Steel Cable Tie

2. Insert the end of the through the on the Steel Cable Tie Self Locking Head Steel

Cable Tie.

3. Pull the end of the to tighten the around the set of Steel Cable Tie Steel Cable Tie

cables.

4. Insert the end of the through the side of the of the Steel Cable Tie Head Cable Tie

Tool Steel Cable Tie Nose Cable Tie Toolso that the is in-between the of the and

feeds out the back of the of the in-between the .Head Cable Tie Tool Grippers

Routing the Steel Cable Tie through the Cable Tie Tool

5. Push the of the towards the on the Head Cable Tie Tool Self Locking Head Steel

Cable Tie.

6. Squeeze the together, tightening the Cable Tie Tool’s Handles Steel Cable Tie

around the set of cables.

Note: You will have to squeeze the several times in order Cable Tie Tool’s Handles

to tighten the around the set of cables.Steel Cable Tie

7. When you have reached the maximum tension. Use the to remove the excess Lever

Steel Cable Tie.

Note: Be careful not to over-tighten the , as you may damage the set Steel Cable Tie

of cables.

Cable Tie

Notch

Cable Tie

Notch

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Product specificaties

Merk:	StarTech.com
Categorie:	Niet gecategoriseerd
Model:	CBMMCTTOOL
Kleur van het product:	Zwart
Gewicht:	615 g
Breedte:	210 mm
Diepte:	155 mm
Hoogte:	40 mm
Gewicht verpakking:	620 g
Breedte verpakking:	215 mm
Diepte verpakking:	132 mm
Hoogte verpakking:	46 mm
Duurzaamheidscertificaten:	RoHS
Geschikt voor materialen:	Roestvrijstaal
(Buitenste) hoofdverpakking hoogte:	455 mm
(Buitenste) hoofdverpakking breedte:	250 mm
(Buitenste) hoofdverpakking lengte:	278 mm
Hoeveelheid per (buitenste) hoofdverpakking:	20 stuk(s)
Snijbreedte (bereik):	4.6 - 7.9 mm