StarTech.com 160W-POWER-ADAPTER Handleiding

StarTech.com Batterij-oplader 160W-POWER-ADAPTER

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com 160W-POWER-ADAPTER (2 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Quick-Start Guide
Manual Revision: June 13, 2024 11:38 AM
Using the Two Conductor Terminal Block Connector
1. Plug the on the into the Two Conductor Terminal Block Connector Adapter
Terminal Connector Device on the .
Note: Ensure the polarity of the input power is correctly matched with the Terminal
Block Pins Device’s to ensure proper functionality. Refer to the vendor manual for
further information on properly wiring the .Device
Using the Three Conductor Terminal Block Connector
1. Using a small screwdriver (Flat Head), loosen the screws on the Two Conductor
Terminal Block Connector Terminal Block Wiresand carefully remove the from
the . Two Conductor Terminal Block Connector
2. Using a small screwdriver, loosen the screws on the Three Conductor Terminal
Block Connector Terminal Block Wires (included) and carefully insert the into the
Three Conductor Terminal Block Connector (Red Wire = Positive and Black Wire =
Negative).
Note: Ensure the polarity of the input power is correctly matched with the Terminal
Block Pins Device’s to ensure proper functionality. Refer to the vendor manual for
further information on properly wiring the .Device
3. Tighten the screws on the , to secure Three Conductor Terminal Block Connector
the into the .Terminal Block Wires Three Conductor Terminal Block Connector
4. Plug the on the into the Three Conductor Terminal Block Connector Adapter
Terminal Connector Device on the .
Component Function
1Power Connector (side) Used to power the .Adapter
2Terminal Block Wires
Used to connect and power a .Device
Two Conductor Terminal Block Connector
Preinstalled
Black Wire with Red + Flag and Red
Ferrule = Positive
Black Wire with White − Flag and Black
Ferrule = Negative
Output Voltage = 24V
Output Current =6.6A 158.4W
Package Contents
Universal Power Adapter with 4ft [1.2m] Cable x 1
Product ID
160W-POWER-ADAPTER
Universal DC Power Adapter - 24V, 6.6A Terminal Block
1
2
4ft [1.2m] Power Cords x4
Two Conductor Terminal Block Connector (Attached)
Three Conductor Terminal Block Connector
Quick-Start Guide
Requirements
Small Flat Head Screwdriver x 1
Device with a Two or Three Conductor Terminal Block Connector x 1
For the latest drivers, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/160W-POWER-ADAPTER
Two Conductor Terminal Block Connector
Three Conductor Terminal Block Connector
+
-
-
+
Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the
limitations or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Connecting the Adapter to a Terminal Block
1. Before terminating the make sure that the is disconnected from Adapter Adapter
the .Power Cord
2. Refer to the vendor manual that came with the in order to properly terminate Device
the . Adapter
Note: The are Black Trim Wire = Positive and Black Wire = Negative. Terminal Wires
The Output is 24V and the Current is 6.6A 158.4W.


Product specificaties

Merk: StarTech.com
Categorie: Batterij-oplader
Model: 160W-POWER-ADAPTER
Kleur van het product: Zwart
Gewicht: 291 g
Breedte: 53 mm
Diepte: 115 mm
Hoogte: 37 mm
Snoerlengte: 1.2 m
Gewicht verpakking: 350 g
Breedte verpakking: 160 mm
Diepte verpakking: 90 mm
Hoogte verpakking: 200 mm
Materiaal behuizing: Kunststof
Stroom: 3.5 A
Meegeleverde kabels: AC
Bedoeld voor: Universeel
Duurzaamheidscertificaten: PSE
Aantal per verpakking: 1 stuk(s)
Ingangsspanning: 100 - 240 V
Uitgangsvermogen: 158.4 W
Soort voeding: Binnen
Merkcompatibiliteit: StarTech.com
Temperatuur bij opslag: -20 - 80 °C
Frequentie: - Hz
Naleving van duurzaamheid: Ja
Output current: 6.6 A
Spanning: 24 V
Compatibiliteit: HB30A10AME, HB30A7AME, ST1030USBM, ST7300USBME, ST4300USBM, HB20A7AME, ST7200USBM, HB20A4AME, ST4200USBM, 5G16AINDS-USB-A-HUB
(Buitenste) hoofdverpakking hoogte: 235 mm
(Buitenste) hoofdverpakking breedte: 470 mm
(Buitenste) hoofdverpakking lengte: 320 mm
Hoeveelheid per (buitenste) hoofdverpakking: 50 stuk(s)
Bedrijfstemperatuur (T-T): 5 - 55 °C
Relatieve vochtigheid in bedrijf (V-V): 20 - 80 procent

Heb je hulp nodig?

Als je hulp nodig hebt met StarTech.com 160W-POWER-ADAPTER stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Batterij-oplader StarTech.com

Handleiding Batterij-oplader

Nieuwste handleidingen voor Batterij-oplader

Nitecore

Nitecore NES1200 Handleiding

30 November 2024
Nitecore

Nitecore D2 Handleiding

30 November 2024
Nitecore

Nitecore V2 Handleiding

30 November 2024
Nitecore

Nitecore NPB2 Handleiding

30 November 2024
Nitecore

Nitecore NPB1 Handleiding

30 November 2024
Nitecore

Nitecore NPS400 Handleiding

30 November 2024
Nitecore

Nitecore NES500 Handleiding

30 November 2024
Nitecore

Nitecore NC10000 Handleiding

30 November 2024
Nitecore

Nitecore FSP100 Handleiding

30 November 2024
Nitecore

Nitecore NES2000 Handleiding

30 November 2024