Star Micronics TSP847L Handleiding
Star Micronics
Printer
TSP847L
Lees hieronder de đź“– handleiding in het Nederlandse voor Star Micronics TSP847L (115 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 80 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/115
THERMAL PRINTER
TSP800 SERIES
USER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
MANUALE DI ISTRUZIONI
Federal Communications Commission
Radio Frequency Interference
Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
For compliance with the Federal Noise Interference Standard, this equipment requires a
shielded cable.
This statement will be applied only for the printers marketed in U.S.A.
Statement of
The Canadian Department of Communications
Radio Interference Regulations
This digital apparatus does not exceed the Class A limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le
brouillage radioélectrique édicté par le ministère des Communications du Canada.
The above statement applies only to printers marketed in Canada.
CE
Manufacturer’s Declaration of Conformity
EC Council Directive 89/336/EEC of 3 May 1989
This product, has been designed and manufactured in accordance with the International
Standards EN 50081-1/01.92 and EN 50082-1/01.92, following the provisions of the
Electro Magnetic Compatibility Directive of the European Communities as of May 1989.
EC Council Directive 73/23/EEC and 93/68/EEC of 22 July 1993
This product, has been designed and manufactured in accordance with the International
Standards EN 60950, following the provisions of the Low Voltage Directive of the
European Communities as of July 1993.
The above statement applies only to printers marketed in EU.
Trademark acknowledgments
TSP700: Star Micronics Co., Ltd.
ESC/POS: Seiko Epson Corporation
Notice
•All rights reserved. Reproduction of any part of this manual in any form whatsoever,
without STAR’s express permission is forbidden.
•The contents of this manual are subject to change without notice.
•All eorts have been made to ensure the accuracy of the contents of this manual at the
time of going to press. However, should any errors be detected, STAR would greatly
appreciate being informed of them.
•The above notwithstanding, STAR can assume no responsibility for any errors in this
manual.
© Copyright 2001 Star Micronics Co., LTD.
TABLE OF CONTENTS
1. Parts Identication and Nomenclature .........................................................1
1-1. Choosing a place for the printer .............................................................3
1-2. Mounting hardware for wall mount model ............................................ 3
2. Consumable Parts and AC Adapter ..............................................................6
3. Connecting Cables and AC Adapter..............................................................8
3-1. Interface Cable .......................................................................................8
3-2. Connecting to a Peripheral Unit........................................................... 10
3-3. Connecting the Optional AC Adapter .................................................. 11
3-4. Turning Power On ...............................................................................12
4. Control Panel and Other Functions .............................................................13
4-1. Control Panel .......................................................................................13
4-2. Errors ...................................................................................................13
4-3. Self Printing .........................................................................................15
5. Loading the Roll Paper .................................................................................17
6. Adjusting the Near-end Sensor .................................................................... 19
7. Preventing and Clearing Paper Jams ..........................................................21
7-1. Preventing Paper Jams .........................................................................21
7-2. Removing Paper Jam ...........................................................................21
8. Periodical Cleaning .......................................................................................22
8-1. Cleaning the Thermal Head .................................................................22
8-2. Cleaning the Paper Holder ...................................................................22
Appendix A: Specications ...............................................................................96
A-1. General Specications .........................................................................96
A-2. Auto Cutter Specications ...................................................................98
A-3. Interface ............................................................................................... 98
A-4. Electrical Characteristics .....................................................................98
A-5. Environmental Requirements ............................................................... 99
A-6. Reliability .............................................................................................99
A-7. Black mark specications ..................................................................100
Appendix B: Dip Switch Setting ..................................................................... 101
B-1. Parallel Interface Type .......................................................................102
B-2. Serial Interface Type ..........................................................................104
Appendix C: Parallel Interface ......................................................................105
Appendix D: Serial Interface ..........................................................................108
D-1. RS-232C Connector ........................................................................... 108
D-2. Cable Connections .............................................................................109
D-3. Electrical Characteristics ...................................................................109
Appendix E: Periheral Unit Drive Circuit ....................................................110
Appendix F: Memory Switch Settings ...........................................................111
Please access the following URL
http://www.star-micronics.co.jp/service/frame_sp_spr_e.htm
for the lastest revision of the manual.
ENGLISH
Product specificaties
| Merk: | Star Micronics |
| Categorie: | Printer |
| Model: | TSP847L |
Heb je hulp nodig?
Als je hulp nodig hebt met Star Micronics TSP847L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Printer Star Micronics
5 Augustus 2024
5 Augustus 2024
7 Juli 2023
19 Juni 2023
16 Juni 2023
15 Juni 2023
15 Juni 2023
12 Juni 2023
6 Juni 2023
6 Juni 2023
Handleiding Printer
- Printer HP
- Printer Sony
- Printer Samsung
- Printer Xiaomi
- Printer Panasonic
- Printer Epson
- Printer LG
- Printer Huawei
- Printer Canon
- Printer Honeywell
- Printer Olympus
- Printer Toshiba
- Printer Xerox
- Printer Brother
- Printer Builder
- Printer D-Link
- Printer Dell
- Printer Digitus
- Printer Dymo
- Printer Epson 7620
- Printer Frama
- Printer Fujifilm
- Printer Fujitsu
- Printer Ibm
- Printer Intermec
- Printer Kodak
- Printer Kogan
- Printer Konica Minolta
- Printer Kyocera
- Printer Lenovo
- Printer Lexmark
- Printer Minolta
- Printer Mitsubishi
- Printer MSI
- Printer Nec
- Printer Paxar
- Printer Polaroid
- Printer Primera
- Printer Renkforce
- Printer Ricoh
- Printer Roland
- Printer Royal Sovereign
- Printer Sagem
- Printer Seiko
- Printer Sharp
- Printer Star
- Printer Thomson
- Printer Tomy
- Printer Toshiba TEC
- Printer Triumph-Adler
- Printer Velleman
- Printer Zebra
- Printer Oce
- Printer Oki
- Printer Olivetti
- Printer Olympia
- Printer CSL
- Printer Argox
- Printer DTRONIC
- Printer Metapace
- Printer Citizen
- Printer Nilox
- Printer Approx
- Printer Ultimaker
- Printer Custom
- Printer Bixolon
- Printer Brady
- Printer GoDEX
- Printer Testo
- Printer EC Line
- Printer Sawgrass
- Printer Pantum
- Printer DNP
- Printer TSC
- Printer Equip
- Printer StarTech.com
- Printer Fichero
- Printer GG Image
- Printer Posiflex
- Printer ZKTeco
- Printer Datamax-O'neil
- Printer Panduit
- Printer Dascom
- Printer HiTi
- Printer Vupoint Solutions
- Printer Elite Screens
- Printer Phoenix Contact
- Printer Colop
- Printer Raspberry Pi
- Printer Evolis
- Printer IDP
- Printer Fargo
- Printer Microboards
- Printer Tally Dascom
- Printer Nisca
Nieuwste handleidingen voor Printer
2 November 2024
23 Oktober 2024
22 Oktober 2024
15 Oktober 2024
26 September 2024
25 September 2024
24 September 2024
24 September 2024
24 September 2024
6 September 2024