Stanley TLM40 Handleiding

Stanley Afstandsmeter TLM40

Lees hieronder de 📖 handleiding in het Nederlandse voor Stanley TLM40 (85 pagina's) in de categorie Afstandsmeter. Deze handleiding was nuttig voor 128 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/85
TLM40
User Manual
Please read these instructions before operating the product.
www.2helpU.com
GB
NL
GR
I
FIN
HU
BG
LV
D
DK
CZ
E
NO
SK
RO
LT
F
SE
RU
PT
PL
SI
EE
TR
HR
KO
2
Figures
1
2
C
D
A
1
2
3
B
E
4
1
3
6.17ft
2
USB
3
GB
Contents
• User Safety
• Charging the Battery
• Operation
• Warranty
• Error Codes
• Specications
Retain all sections of this manual for future
reference.
User Safety
WARNING:
Carefully read the Safety
Instructions and Product Manual
before using this product. The person
responsible for the product must
ensure that all users understand and
adhere to these instructions.
WARNING:
The following label information
is placed on your laser tool to inform
you of the laser class for your
convenience and safety Figure B.
Symbol Meaning
V Volts
mW Milliwatts
Laser Warning
nm Wavelength in nanometers
2 Class 2 Laser
WARNING: To reduce the risk of
injury, user must read this
instruction manual and the
Safety Manual.
WARNING: LASER
RADIATION. DO NOT STARE
INTO BEAM. Class 2 Laser
Product.
WARNING:
While the laser tool is in
operation, be careful not to expose
your eyes to the emitting laser beam
(red light source). Exposure to a laser
beam for an extended time period may
be hazardous to your eyes. Do not
look into the beam with optical aids.
Charging the Battery
Fully charge the battery before initial use and
whenever the tool has not been used for 6
months or longer.
1. Locate the port cover on the side of the
tool (Figure A 4).
2. Using your finger, gently pull the port cover
down (Figure C 1).
3. Insert the small end of the USB Recharge
Cable into the port on the side of the tool,
making sure to insert the flat side of the
cable into the flat side of the port (Figure
C 2).
4. Insert the USB end of the cable into a USB
port in a computer or USB power outlet
(Figure C 3).
5. Wait approximately 2.5 hours for the
battery to fully charge and then disconnect
the USB Recharge Cable.
When the tool is ON, the battery level appears

Product specificaties

Merk: Stanley
Categorie: Afstandsmeter
Model: TLM40

Heb je hulp nodig?

Als je hulp nodig hebt met Stanley TLM40 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Afstandsmeter Stanley

Stanley

Stanley TLM165 Handleiding

15 November 2024
Stanley

Stanley STHT77666 Handleiding

4 Juni 2023
Stanley

Stanley TLM99s Handleiding

16 Mei 2023
Stanley

Stanley TLM165si Handleiding

17 April 2023
Stanley

Stanley TLM330 Handleiding

2 April 2023
Stanley

Stanley STHT77366 Handleiding

13 Maart 2023
Stanley

Stanley Smart Measure Pro Handleiding

27 Februari 2023
Stanley

Stanley TLM40 Handleiding

29 Januari 2023

Handleiding Afstandsmeter

Nieuwste handleidingen voor Afstandsmeter

DeWalt

DeWalt DWHT77100 Handleiding

11 Juni 2024
Leica

Leica Rangemaster CRF R Handleiding

6 Maart 2024
Chauvin Arnoux

Chauvin Arnoux CA 1730 Handleiding

19 December 2023
Toolcraft

Toolcraft LDM X40 Handleiding

11 December 2023
Toolcraft

Toolcraft LDM100H Handleiding

11 December 2023
Meec Tools

Meec Tools 405-055 Handleiding

6 December 2023
Klein Tools

Klein Tools 93LDM65 Handleiding

14 November 2023
IFM

IFM R1D200 Handleiding

12 November 2023
IFM

IFM R1D102 Handleiding

12 November 2023
Bushnell

Bushnell Bone Collector 850 Handleiding

6 September 2023