Stanley Smart Measure Pro Handleiding

Stanley Afstandsmeter Smart Measure Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Stanley Smart Measure Pro (34 pagina's) in de categorie Afstandsmeter. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/34

Please read and save these instructions before operating the product

Lea y conserve estas instrucciones antes de utilizar el producto

Merci de lire et de conserver ces instructions avant d'utiliser le produit

STHT77366

www.STANLEYTOOLS.com

Smart Measure Pro

ESP

79003493

User Manual

The STANLEY® Smart Measure Pro Laser Distance

Measurer is an estimation tool that connects to

your mobile device to give you the capability to

take measurements with the snap of a picture.

From that photo you can capture real time

measurements including height, width, area, and

length. Images and measurements can be shared

in multiple formats through email, messages or

the cloud. The Smart Measure Pro app can also

assist in estimating materials for many different

job applications.

The Bluetooth® word mark and logos are

registered trademarks owned by the Bluetooth®,

SIG, Inc. and any use of such marks by Stanley is

under license. Other trademarks and trade names

are those of their respective owners.

User Safety

Retain all sections of this manual for future

reference.

WARNING:

To reduce the risk of injury read all safety

and operating instructions before using this

product.

WARNING:

While the laser tool is in operation, be

careful not to expose your eyes to the

emitting laser lens. Exposure to a laser

beam for an extended time may be

hazardous to your eyes.

WARNING:

This instrument emits a non-visible laser

beam. The laser beam emitted is Laser

Class 1 per IEC 60825-1:2014 and complies

with 21 CFR 1040.10 and 1040.11 except for

deviations pursuant to Laser Notice No. 50,

dated June 24, 2007.

WARNING:

Hazardous Radiation. Use of controls or

adjustments or performance of procedures

other than those speciﬁed herein may result

in hazardous radiation exposure.

WARNING:

The following label is placed on your laser

tool to inform you of the laser class for your

convenience and safety.

1. Laser emission lens 5. Micro USB charging port

2. Receiving lens 6. Power button

3. Clamp release button 7. Device clamp

4. LED indicator 8. USB charging cable

DO NOT remove any warning label(s) on the

housing.

This instrument must only be used for tasks as

outlined in the Product Manual.

ALWAYS make sure that any bystanders in the

vicinity of use are made aware of the dangers of

looking directly into the laser beam.

DO NOT use in combination with other optical

instruments. Do not modify the laser tool, make

adjustments or use in other applications than

those described herein.

DO NOT look into the beam lens with optical

aids, such as magniﬁers, binoculars or telescopes.

DO NOT stare into the laser beam lens.

DO NOT operate the laser tool if damaged or

broken.

DO NOT direct the laser tool at other persons.

DO NOT set the instrument at eye level whenever

possible.

ALWAYS turn the laser tool OFF when not in

use. Leaving the laser tool ON increases the risk

of someone inadvertently staring into the laser

beam.

DO NOT operate the laser tool in combustible

areas such as in the presence of ﬂammable

liquids, gases or dust.

DO NOT disassemble the laser tool. There are no

user serviceable parts inside. Disassembling the

laser will void all warranties on the product. Do

not modify the product in any way. Modifying the

laser tool may result in hazardous laser radiation

exposure.

DO NOT use this instrument in areas where a risk

of explosion is present.

DO NOT direct laser beam towards aircraft or

moving vehicles.

Battery Safety

DO NOT splash or immerse in water or other

liquids.

DO NOT store or use in locations where the

temperature may reach or exceed 40.5 °C

(105 °F) (such as outside sheds or metal

buildings in summer). For best life store in a cool,

dry location.

Risk of Fire or Explosion:

• DO NOT incinerate even if severely damaged

or completely worn out. The battery can explode

in a ﬁre. Toxic fumes and materials are created

when lithium ion batteries are burned.

• NEVER attempt to open for any reason. If the

housing is cracked or damaged, do not charge.

• Battery liquid may be ﬂammable if exposed to

spark or ﬂame.

Risk of Skin or Respiratory Irritation:

• If battery contents come into contact with the

skin, immediately wash area with mild soap and

water.

• Contents of opened battery may cause

respiratory irritation. Provide fresh air. If

symptoms persist, seek medical attention.

• If battery liquid gets into the eye, rinse water

over the open eye for 15 minutes or until

irritation ceases. If medical attention is needed,

the battery electrolyte is composed of liquid

organic carbonates and lithium salts.

DO NOT crush, drop or damage. Do not use if

it has received a sharp blow, been dropped, run

over or damaged in any way (e.g. pierced with

a nail, hit with a hammer, stepped on).

Damaged devices should be recycled.

DO NOT charge the battery pack in an air

temperature below +40 °F (+4.5 °C), or above

+105 °F (+40.5 °C). Longest life and best

Product specificaties

Merk:	Stanley
Categorie:	Afstandsmeter
Model:	Smart Measure Pro
Kleur van het product:	Zwart
Gewicht:	100 g
Automatisch uitschakelen:	Ja
Accu/Batterij voltage:	3.7 V
Levensduur accu/batterij:	5 uur
Eenheid van de maatregel:	ft, m
Laser klasse:	1
Golflengte:	905 nm
Dichtstbijzijnde focus afstand:	1.8 m
Afmetingen (B x D x H):	86 x 67 x 45 mm
Bedrijfstemperatuur (T-T):	-10 - 50 °C
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Type batterij:	Integral Li-Ion
Temperatuurbereik voor opslag (T-T):	-20 - 60 °F
Meting-bereik:	1.8 - 150 m