Speco Technologies ZIPK8BD2 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Speco Technologies ZIPK8BD2 (108 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/108
User Guide (Ver. 1.4)
Models ZIPKIT :
Network Video Recorder and IP Camera
About This User’s Guide
Before operating the unit, please read this thoroughly and retain it for future reference. user’s guide
2
Cautions
Explanation of Graphical Symbols
WARNING
To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.
CAUTION
Changes or modifications not approved by the manufacture will void the warranty of the product.
Using an incompatible battery may increase the risk of fire or explosion.
Replace only with the same or equivalent type battery recommended by the manufacture.
Discard used batteries according to manufacturer’s instructions.
This symbol indicates the presence of important operang and maintenance
(servicing) instrucons in the literature accompanying the product.
This symbol indicates the presence of “dangerous voltage” within the product’s
enclosure that may be of sucient magnitude to constute a risk of electric
shock, property damage, personal injury, or death.
3
These precautions must be followed for safety reasons
Warning
ď‚· Do not use if the unit emits smoke.
ď‚· Do not disassemble the unit.
ď‚· Do not place any heavy or sharp objects on the unit.
ď‚· Do not place on uneven surface.
ď‚· Do not expose to shock or vibration.
ď‚· Do not move the unit when the unit is powered on.
ď‚· Do not block, and allow dust to accumulate in the air vents.
ď‚· Do not restrict airflow of the unit; doing so can damage the unit.
ď‚· Only qualified and experienced personnel should perform installation and
servicing.
ď‚· Turn off the power of the ZS when connecting Cameras, Audio or Sensor
Cables.
ď‚· The manufacturer is not responsible for any damage caused by improper use
of the product or failure to follow instructions for the product.
ď‚· The manufacturer is not responsible for any problems caused by or resulting
from the user physically opening the ZS for examination or attempting to repair
the unit.
ď‚· For ZS models with the PoE Switch, it is strongly recommended that the 48V
connector is inserted to the PoE Switch before the AC cable is attached to the
adaptor.


Product specificaties

Merk: Speco Technologies
Categorie: Bewakingscamera
Model: ZIPK8BD2

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies ZIPK8BD2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Speco Technologies

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera