Speco Technologies O2ID21M Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Speco Technologies O2ID21M (36 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 91 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
Please read this manual carefully before operating the unit and keep it for further reference
User Manual
Intensifier® IP Camera
(O2iB92/O2iD22/O2iD21M/O2iB91M)
Welcome
Thank you for purchasing this network camera!
Please read this manual carefully before operating the unit and retain it for future reference.
Should you require any technical assistance, please contact Speco Technologies Technical Support.
Important Safeguards and Warnings
1Electrical Safety
All installation and operation here should conform to local electrical safety codes.
Use a certified/listed 12VDC Class 2 power supply only.
Please note: Do not connect two power supplying sources to the device at the same time; it may result in
device damage! The product must be grounded to reduce the risk of electric shock.
Improper handling and/or installation could run the risk of fire or electrical shock.
Speco Technologies assumes no liability or responsibility for any fires or electrical shock caused by improper
handling or installation.
2Transportation
Heavy stress, violent vibration or exposure to water is not allowed during transportation, storage and installation.
3Installation
Handle the device with care. Keep the device right side up.
Do not apply power to the camera before completing installation.
Do not place objects on top of the camera.
4Repair Professionals
All examination and repair work should be done by qualified personnel only.
Speco Technologies is not liable for any problems caused by unauthorized modifications or user-attempted
repair.
5Environment
The camera should be kept in a cool, dry place away from direct sunlight, flammable materials, explosive
substances, etc.
This product should be transported, stored, and used only in the specified environments as stated above.
Do not aim the camera at a strong light source, as it may cause overexposure of the picture, and may affect the
longevity of the camera’s sensors.
Ensure that the camera is in a well ventilated area to prevent overheating.
6. Operation and Maintenance
Do not touch the camera sensor or lens directly.
To clean dust or dirt off of the lens, use an air blower or a microfiber cloth.


Product specificaties

Merk: Speco Technologies
Categorie: Bewakingscamera
Model: O2ID21M

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies O2ID21M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Speco Technologies

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera