Speco Technologies VL572TPIR Handleiding

Speco Technologies Bewakingscamera VL572TPIR

Lees hieronder de 📖 handleiding in het Nederlandse voor Speco Technologies VL572TPIR (4 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
VL572TPIR Camera
Specifications:
HD-TVI PIR Housing Camera
Note:
Before applying power to the camera, please read this
User Guide in detail.
Camera
Video System NTSC System
Sensor 1/2.7” Sony CMOS
Numbers of Pixel 1920*1080
Resolution 1080P
Lens Aspherical 3.7mm Lens
Day & Night Color/ B/W / Auto
Signal Noise Ratio ≥54Db(Max 83.5dB)
Electronic Shutter 1/60(1/50)-1/100000S
White Balance Auto (Range 2200 10000K) ～
Backlight Compensation Auto/Manual
Gain Control Auto/Manual
Gamma Correction 0.45/1.0
Video Output 1V p-p,75 Ω
Min. Illumination 0.001 Lux
PIR Sensor
Detecting Angle Max. 100°
Level Signal 3.3V/0V
Level Signal Duration 5s to 300s adjustable
Sensor Static Current <50uA
Detecting Dis. 10ft to 23ft adjustable
General
Voltage Input DC12V± 10%
Power Current 80mA
Operation Temp. -4°F ~ 120°F
Storage Temp. -13°F ~ 158°F
Humidity Range 20%~90% RH
Dimension 4.72H*2.75W*1.89L
Net Weight 0.4lbs.
Product Features:
1/2.7” SONY CMOS
1080P
3.7mm lens
0.001 Lux
Built- PIR Motion Sensor in
3pcs wires for PIR NO/NC optional connection
Installation Notes:
PIR wires-White wire:COM/Purple wire: NO/Green wire:NC
To prevent shock or damage to the water-resistant body,
tighten all the screws and cover
Do not directly touch the front glass. To clean the dust by
wiping with soft cloth and alcohol.
Do not install camera where vibration is present.
Do not install camera where temperature is above 120°F or
below 4°F. –
Do not expose power or video connection to moisture or
water.
If camera is not functioning properly, please power off and
contact the manufacturer.
Note:
Non-regulated power supply may cause damage to camera.
Product Features:
Trouble Shooting:
No picture after providing power
Check the power supply voltage, it may be outside specification.
Please check the connecting cables and monitors to determine if the
camera is connected correctly or not.
The picture has flowing interference ripples
Check the ground of the monitor and other peripheral equipment
that are being used is the same ground as the camera.
The background color continuously changes
A fluorescent bulb’s electromagnetic field can cause a color roll. This
is a proper phenomenon of the camera.
To improve the image, try to increase the distance between the cam-
era and the bulb, or change the angle such that it doesn’t face the
florescent bulb.
Introduction:
Congratulations on your purchase of this Speco product. This cam-
era utilized the latest in sensors and drivers. The most appealing
characteristics of this camera are day & night features, and indoor
& outdoor applications. This product is a great addition to your
CCTV system.
Please read this manual carefully to ensure proper
use of the product.
The symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
The symbol is intended to alert the user to the presence
of
uninsulated dangerous voltage’ within the product’s
enclosure that may be of sufficient Magnitude to constant
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFED SERVICE PERSONNEL
CAUTION:
RISK OF ELECTRONIC SHOCK
DO NOT OPEN
PIR Sensor:

Product specificaties

Merk: Speco Technologies
Categorie: Bewakingscamera
Model: VL572TPIR

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies VL572TPIR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera Speco Technologies

Speco Technologies

Speco Technologies O2VLB7 Handleiding

27 Mei 2024
Speco Technologies

Speco Technologies VLDT3GM Handleiding

6 Juli 2023
Speco Technologies

Speco Technologies CVC624WDR Handleiding

1 Juli 2023
Speco Technologies

Speco Technologies O4iB2M Handleiding

30 Juni 2023
Speco Technologies

Speco Technologies ZIPTW4B1 Handleiding

27 Juni 2023
Speco Technologies

Speco Technologies O2ID21M Handleiding

26 Juni 2023
Speco Technologies

Speco Technologies Intensifier 2 CVC6246iHR Handleiding

26 Juni 2023
Speco Technologies

Speco Technologies O4DT1 Handleiding

25 Juni 2023
Speco Technologies

Speco Technologies O4iB2 Handleiding

25 Juni 2023
Speco Technologies

Speco Technologies O8D8M Handleiding

22 Juni 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Honeywell

Honeywell HC35WE5R3 Handleiding

20 December 2024
Honeywell

Honeywell Performance H4W8PER2V Handleiding

20 December 2024
Hikvision

Hikvision DS-2CE12KF3T-LS Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE78D0T-LXTS/A Handleiding

18 December 2024
TP Link

TP Link VIGI C450 Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE76U0T-LPF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE78U0T-LF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE16U0T-LPF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE72KF3T-LSYE Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE17U0T-LF Handleiding

18 December 2024