Speco Technologies O4VLD1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Speco Technologies O4VLD1 (11 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Quick Start Guide
4MP IP Vandal Dome Camera
O4VLD1
Version 1.0
i
Welcome
Thank you for purchasing this network camera!
This manual is designed to be a reference tool for your system. owner’s
Please read this manual carefully before operang the unit and retain it for future reference.
Should you require any technical assistance, please contact Speco Technologies Technical Support.
ii
Important Safeguards and Warnings
1 Electrical safety
.
.
.
..
All installaon and operation here should conform to local electrical safety codes.
Use a certiî…’ed/listed 12VDC Class 2 power supply only.
Please note: Do not connect two power supplying sources to the device at the same me; it may result in
device damage! The product must be grounded to reduce the risk of electric shock.
Improper handling and/or installaon could run the risk of re or electrical shock.
2 Environment
.
.
.
..
Heavy stress, violent vibraon or exposure to water is not allowed during transportaon, storage and
installation.
This product should be installed in a cool, dry place away from direct sunlight and heat sources.
Do not install the product in extreme temperature conditions.
Do not expose the camera to electromagnec radiaon. Otherwise it may result in CMOS sensor failure.
Do not block any venlation openings.
Do not allow water and liquid intrusion into the camera.
3. Operaon and Daily Maintenance
Please shut down the device and then unplug the power cable before you begin any maintenance work.
Do not touch the CMOS sensor opc component. You can use a blower to clean the dust on the lens surface.
Always use the dry soî…° cloth to clean the device. If there is too much dust, use a cloth dampened with a small
quanty of neutral detergent. Finally use the dry cloth to clean the device.
Please use a professional opcal cleaning method to clean the enclosure. Improper enclosure cleaning (such as
using cloth) may result in poor IR functionality and/or IR reecon.
The grounding holes of the product are recommended to be grounded to further enhance the reliability of the
camera.
Dome cover is an opcal device, please don’t touch or wipe cover surface directly during installaon and use,
please refer to the following methods dirt is found: if
Stained with dirt
Use oil-free soî…° brush or hair dryer to remove it gently.
Stained with grease or î…’ngerprint
Use oil-free coon cloth or paper soaked with alcohol or detergent to wipe from the lens center outward.
Change the cloth and wipe several mes if it is not clean enough.
Warning
This camera should be installed by qualiî…’ed personnel only.
All the examinaon and repair work should be done by qualied personnel.
Any unauthorized changes or modicaons could void the warranty.


Product specificaties

Merk: Speco Technologies
Categorie: Bewakingscamera
Model: O4VLD1

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies O4VLD1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Speco Technologies

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera