Speco Technologies Intensifier O2IB68M Handleiding

Speco Technologies Bewakingscamera Intensifier O2IB68M

Lees hieronder de 📖 handleiding in het Nederlandse voor Speco Technologies Intensifier O2IB68M (11 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

Intensier® IP Bullet Camera with Motorized Lens

QUICK INSTALLATION GUIDE

O2iB68M

Please read this manual carefully before installation and operation of the product.

Notice

Thank you for purchasing this product. This guide is designed to be a reference tool for the product.

Please read it carefully before operating the product and retain it for future reference. Should you

require any technical assistance, please contact Speco Technologies Technical Support.

INFORMATION

This equipment has been tested and found to comply with limits for a Class A digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at its own expense.

WARNING

Changes or modifications not expressly approved by the manufacturer could void the user’s authority

to operate the equipment.

CAUTION – To prevent electric shock and risk of the re hazards

 Do NOT use power source other than that specied.

 Do NOT expose this appliance to rain or moisture.

PRECAUTIONS

 Please read the manual carefully before the installation in order to set up the camera correctly and

to obtain the best picture quality.

 Please keep the manual in good condition for your future reference and service application.

 Installation and services should only be carried out by an authorized personnel according to local

safety regulations.

 If any liquid or solid matter gets into the housing, immediately disconnect the camera from power

supply and have it checked by your authorized dealer before reusing.

The lighting ash with an arrowhead symbol, within an equilateral triangle is

intended to alert the user to the presence of non-insulated dangerous voltage within

the product’s enclosure that may be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

This installation should be made by a qualied service person and should conform to all local codes.

CAUTION

TO REDUCE THE RISK OF ELECTRLC SHOCK,

DO NOT REMOVE THE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

RISK OF ELECTRLC

SHOCK

DO NOT OPEN

CAUTION

 Avoid installing the camera at extremely hot or cold places.

 If you are not a certied person, never try to dismantle the camera.

To avoid electric shock, never remove the screws or covers. There are no parts inside that need

maintenance by the user. All maintenance should be carried out by qualied personnel.

 Avoid installing the camera at a place of high humidity.

 Avoid installing the camera at the place exposed to gas or oil.

 Keep the top glass of the lens always clean in order to obtain the best picture quality all the time.

Be careful not to be stained by ngerprint.

 Don't face the camera directly toward sunlight or sunlight reecting area.

IMAGE SENSOR may go defective at this condition.

 Please give a special attention to keep the unit from dangerous drop or external shock during the

process of transportation or handling.

 Never try to touch the camera in wet hand. It may cause an electric shock.

 Do not expose the camera to radioactivity. It causes a serious damage on the IMAGE SENSOR.

LIMITATION OF LIABILITY

This publication is provided “AS IS” without warranty of any kind, either express or implied, including

but not limited to, the implied warranties of merchantability, tness for any particular purpose, or non-

infringement of the third party's right.

This publication could include technical inaccuracies or typographical errors. Changes are added to

the information herein, at any time, for the improvements of this publication and / or the corresponding

product(s).

DISCLAIMER OF WARRANTY

In no event shall seller be liable to any party or any person, except for replacement or reasonable

maintenance of the product, for the cases, including but not limited to below :

(1) Any damage and loss, including without limitation, direct or indirect, special, consequential or

exemplary, arising out of or relating to the product.

(2) Personal injury or any damage caused by inappropriate use or negligent operation of the user.

(3) Unauthorized disassemble, repair or modication of the product by the user.

(4) Inconvenience or any loss arising when images are not displayed, due to any reason or cause

including any failure or problem of the product.

(5) Any problem, consequential inconvenience, or loss or damage, arising out of the system

combined by the devices of third party.

(6) Any claim or action for damages, brought by any person or organization being photogenic subject,

due to violation of privacy with the result of that surveillance-camera's or video server s picture, ’

including saved data, for some reason, becomes public or is used for the purpose other than

surveillance.

1. PRODUCT OVERVIEW

Key Features

 2.0 Mega pixel 1/2.8" SONY progressive sc an CMOS image sensor for excellent image quality

 IP67 rated weather-proof

 2.7 ~ 12mm / 5.0 ~ 50mm X10 Optical zoom

 Cable managed bracket

 Perfect 3-Axis mechanism

 Triple Streaming of H.264 and M-JPEG

Product specificaties

Merk:	Speco Technologies
Categorie:	Bewakingscamera
Model:	Intensifier O2IB68M

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies Intensifier O2IB68M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Bewakingscamera Speco Technologies

Speco Technologies O2VLB7 Handleiding

27 Mei 2024

Speco Technologies VLDT3GM Handleiding

6 Juli 2023

Speco Technologies CVC624WDR Handleiding

1 Juli 2023

Speco Technologies O4iB2M Handleiding

30 Juni 2023

Speco Technologies ZIPTW4B1 Handleiding

27 Juni 2023

Speco Technologies O2ID21M Handleiding

26 Juni 2023

Speco Technologies Intensifier 2 CVC6246iHR Handleiding

26 Juni 2023

Speco Technologies O4DT1 Handleiding

25 Juni 2023

Speco Technologies O4iB2 Handleiding

25 Juni 2023

Speco Technologies O8D8M Handleiding

22 Juni 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Honeywell HC35WE5R3 Handleiding

20 December 2024

Honeywell Performance H4W8PER2V Handleiding

20 December 2024

Hikvision DS-2CE12KF3T-LS Handleiding

18 December 2024

Hikvision DS-2CE78D0T-LXTS/A Handleiding

18 December 2024

TP Link VIGI C450 Handleiding

18 December 2024

Hikvision DS-2CE76U0T-LPF Handleiding

18 December 2024

Hikvision DS-2CE78U0T-LF Handleiding

18 December 2024

Hikvision DS-2CE16U0T-LPF Handleiding

18 December 2024

Hikvision DS-2CE72KF3T-LSYE Handleiding

18 December 2024

Hikvision DS-2CE17U0T-LF Handleiding

18 December 2024