Speco Technologies HLED33D7W Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Speco Technologies HLED33D7W (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 90 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
OSD MENU TREE
960H 700TVL Color Indoor Dome Camera with 24LEDs
HLED33D1B – 2.8~12mm auto iris lens, black housing
HLED33D1W – 2.8~12mm auto iris lens, white housing
HLED33D7B – 3.6mm lens, black housing
HLED33D7W – 3.6mm lens, white housing
200 New Highway, Amityville, NY 11701
800-645-5516 / www.specotech.com
DIMENSIONS
Side View *Accessories *
3 mounting screws
1 Power Cable
1 Video Cable
SPECIFICATIONS
Bottom View
OSD MENU TREE
EXPOSURE
β€’ALC / ELC
β€’ β€’CDS EXTERN
β€’ β€’BACKLIGHT PRIVACYβ€’ β€’ β€’CONTRAST POSI/NEGA H-MIRROR
β€’ β€’ β€’CAM TITLE CAM ID ID DISP.
β€’ β€’LANGUAGE SPECIAL
DAY&NIGHT
MONITOR
IMAGE
SYSTEM
EXIT
(SAVE/RESTORE/INITIAL/MANUAL)
β€’SHUTTER β€’FLK β€’AGC β€’LENS β€’BRIGHTNESS
β€’ β€’ β€’ β€’ β€’GAMMA CHROMA SHARPNESS SHADING PED.LV.
β€’ β€’ATW MANUAL
WHITE BAL.
DNR
β€’ β€’ β€’ β€’LOW MIDDLE HIGH OFF
MOTION
β€’ β€’ON OFF
β€’SYNC
β€’ β€’ β€’OFF D-WDR DEFOG
ITEM 960H 700TVL IR Indoor Dome Camera
Lens HLED33D1B(W) – 2.8~12mm auto iris lens
HLED33D7B(W) - 3.6mm fixed lens
Image Sensor 1/3” COLOR 960H CCD
Resolution 700TV lines
Total Pixels 1020(H) x 508(V) (NTSC)
Effective Pixels 976(H) x 494(V) (NTSC)
Scanning System 2 : 1 Interlace
Synchronization Internal
Min. Illumination 0.00Lux (LED-On)
Number of IR LEDs 24LEDs
IR Range 65’ (depending on scene reflection)
S/N (Y signal) 50dB
AGC Level Adjustable
Shutter 1/60~1/120,000sec (NTSC)
DAY / NIGHT AUTO / NIGHT / DAY
Image BLC / D-WDR / DEFOG
White Balance ATW / PUSH / MANUAL
DNR LOW / MIDDLE / HIGH
Motion Detection ON | OFF (4 Programmable Zone)
Privacy Masking ON | OFF (8 Programmable Zone)
Power Consumption 350mA
Power Supply 12VDC / 24VAC Dual Voltage
Operational Temp. 14 F - 122 F
Storing Temp. -4 F - 140 F
Dimensions 3.4” (H) x 4.4” (Dia.)
Weight 8oz.
SPECIFICATIONS
β€’SENS UP
β€’ β€’AUTO NIGHTβ€’DAY
β€’PUSH
β€’ β€’BLC HLC
β€’BAUDRATE
β€’SMART IR
MOTION : Adjusts motion detection settings.
ON : SENSITIVITY : Sets the desired multiple of the digital exposure length.(0~20)
AREA NO : Selects the current motion zone from area1 to 4.
AREA USE : Adjusts the motion detection zone size.
TOP/BOTTOM/LEFT/RIGHT : Adjusts the mask zone size for directions
SYSTEM : Adjusts various System options.
CAM TITLE : Determines the camera name. (ON/OFF)
CAM ID : Sets the ID for the RS-485 (0~255)
ID DISP. : ON(Disables camera NO/ID)/OFF(Displays camera No/ID)
BAUDRATE : : Sets the baud rate for the RS-485 (2400~115200)
LANGUAGE : Sets the desired OSD language. (ENGLISH/CHINESE)
SPECIAL : Adjusts special options.
DEFECT DET : Uses this mode when β€œWhite Spot(Dead Pixel)” on screen
is occurred.
FONT COLOR : Sets the camera OSD color(0~8)
EXIT
SAVE : Press to save the current settings and exit main menu.
RESTORE : Press to exit main menu without saving settings.
INITIAL : Resets all settings to it’s factory defaults.
EXPOSURE : Adjusts exposure settings.
ALC (Automatic Light Control) : Used with auto iris lens only - HLED33D1B(W)
ELC (Electronic Light Control) : Used with fixed lens only - HLED33D7B(W)
LENS : Select the lens type (ALC/ELC)
BRIGHTNESS : Adjusts image brightness. (0~ 20)
SHUTTER : Auto / Manual Shutter can be selectable.
You can control manually from 1/60 to 1/120000.
FLK(Flicker Less) : Selects this when picture flickering. The picture flickering can be
caused by a clash with the frequency of the installed lighting.(ON/OFF)
AGC: Adjusts the Automatic Gain Control level. (0~20)
SENS-UP : Automatically provides a clear image under low-light conditions.
You can control the maximum low-light magnification from x2 to
x1024 (increasing magnification may cause noise/distortion).
IRIS OFFSET : Adjusts the Iris Offset level. (0~20)
DAY / NIGHT : Adjust Day / Night options.
EXTERN : Day / Night is switching automatically by built-in Photo Sensor.
EXTERN S/W : Adjusts the Extern switching level (LOW/HIGH)
D/N DELAY : Adjusts the calculation time for the trigger(0~15sec)
B/W BURST : Selects the B/W BURST Mode (ON/OFF)
SMART IR : Uses to produce the best image quality by preventing IR
saturation when IR LEDs are on. (LED Power/Anti-SAT/SAT.AREA)
NIGHT : Full time B/W mode.
B/W BURST & SMART IR : same as above
DAY : Full time color mode.
CDS & AUTO : Not used for this camera
WHITE BAL : Adjusts white balancing options.
ATW : Automatically white balances the image.
PUSH If h PUSH i h i h i i i i A Whi B l
OSD MENU FUNCTIONS
960H 700TVL Color Indoor Dome Camera with 24LEDs
HLED33D1B – 2.8~12mm auto iris lens, black housing
HLED33D1W – 2.8~12mm auto iris lens, white housing
HLED33D7B – 3.6mm lens, black housing
HLED33D7W – 3.6mm lens, white housing
200 New Highway, Amityville, NY 11701
800-645-5516 / www.specotech.com
PUSH : If you press the PUSH switch in the appropriate item position, Auto White Balance
will perform once.
MANUAL : Selects the MANUAL white balancing mode to manually adjust the scene to
your desired settings.
RED : Adjusts the red gain level. (0~ 20)
BLUE : Adjusts the blue gain level. (0~20)
MONITOR : Sets the video output to main input types.
GAMMA : Sets the desired Gamma value. (0.35/0.40/0.45/0.50/0.55/0.60/0.65/0.70)
CHROMA : Sets the color gain (0~20)
SHARPNESS : Sets the amount of sharpness applied on the image(0~20)
SHADING : Sets the Lens Shading Compensation value. (0~20)
PED. LV : Sets the Pedestal Level (0~20)
IMAGE : Adjusts various effect options.
BACKLIGHT : : Adjusts backlight options.
BLC : Produces a clearer image of an object darkened by strong backlighting.
HLC : Uses to contain extremely bright areas such as from car headlight,
the light can be masked out much of the on-screen details.
CONTRAST : Adjusts Contrast options.
D-WDR : Uses a digital wide dynamic range to balance dark and over
saturated areas within the image.
DEFOG : Activated this mode when the video or the weather is foggy.
It maintains a clear picture.
POSI/NEGA : Changes to Positive or Negative image.
H-MIRROR :Flips the image along the y-axis.
PRIVACY : Used to hide regions of the image.
ON : MASK LV : Selects the desired mask color
AREA NO.: Selects the current mask area from1 to 8 zones
DISPLAY: Selects ON/OFF to display of mask zone or not.
TOP/BOTTOM/LEFT/RIGHT : Adjusts the mask zone size for directions.
DNR : Reduces the background noise caused by the digital enhancement
of a low light environment. If AGC is turned OFF, the 2D-DNR will
be disabled. (LOW/MIDDLE/HIGH)
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without
notice and without incurring any obligation. Rev. 052614


Product specificaties

Merk: Speco Technologies
Categorie: Bewakingscamera
Model: HLED33D7W

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies HLED33D7W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Speco Technologies

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera