Sony SNC-CX600W Handleiding

Sony Bewakingscamera SNC-CX600W

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony SNC-CX600W (4 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Network Camera

Prep

Attach t

Connec

unit, th

aft

Set

one

For d

Pres

NETW

It may tak

Return to 2-1.

Confirm the camera video images

Download “SNC toolbox” installer from the following URL.

http://www.sony.net/ipela/snc

Install SNC toolbox.

Decompress the downloaded installer zip file.

Double-click “SncToolbox_Setup.exe.”

For details on installation and usage, refer to the Application Guide.

Start SNC toolbox.

The camera(s) connected to the local network is detected and its list is

displayed on the Monitor.

To access the camera, double-click the model name “SNC-CX600W” and

start the web browser.

Confirm the video images via the web browser.

Example

Main menu

Control panel Monitor

Confirmation of camera video images is finished.

For details, see the User's Guide.

4-474-879- (1)11

Quick Start Guide

SNC-CX600W

About the manuals

Quick Start Guide (this document)



The Quick Start Guide describes the camera setting method. Be sure to read this

before operating.

Safety Regulations (supplied)



The Safety Regulations describes the secure usage of camera. Be sure to read it.

Installation Manual (supplied)



The Installation Manual describes the camera installation and connection. Be

sure to read it.

On-line manuals



You can download the above manuals from the following URL.

http://www.sony.net/ipela/snc

About system configuration

Computer

Router

Notes

Prepare a Wi-Fi CERTIFIED and WPS compatible router and computer.



The factory setting of Wi-Fi and wired network of the camera is DHCP.



Validate the DHCP setting of your router.



Connecting to a Wi-Fi network

SNC toolbox

1 When you begin, “User Account Control – An unidentified program wants access *

to your computer” may appear. In this case, click “Allow.”

2 If your computer uses a personal firewall software or anti-virus software, SNC *

toolbox may not operate correctly. In this case, invalidate the corresponding

software.

3 If you are using Windows XP Service Pack 2 or later, Windows Vista, Windows 7 or *

Windows 8, disable Windows Firewall. For details, refer to the Application Guide.

4 For details on fixed IP settings, DNS server address, HTTP port settings, or Proxy *

Server settings, see the Application Guide.

5 Before installing SNC toolbox, log in to your computer as Administrator.*

Web browser

6 When you display the camera viewer for the first time, “Security Warning” is *

displayed on the monitor. Click [Yes], and install ActiveX Control.

7 Before installing ActiveX Control, log in to your computer as Administrator.*

8 If installation of ActiveX is prohibited by the pop-up block function of Internet *

Explorer or pop-up blocking software, installation of ActiveX is not possible.

9 If video images are not displayed correctly, set the security level of Internet *

Explorer to [Medium] or lower. For details, see the User's Guide.

10 If your computer uses anti-virus software, security software, personal firewall, *

or pop up blocker, camera performance (displayed frame rate) may deteriorate.

11 While accessing this unit, web pages are displayed in JavaScript. If your *

computer uses the above anti-virus software, etc., web pages may not be displayed

correctly.

Help

Preparing the camera

Connect the network cable to the network port on the rear panel.

Connect the supplied AC adapter to the power input terminal of this

unit, then connect to a wall outlet.

POWER indicator NETWORK indicator

LED indicators

Confirm that the POWER indicator turns green about one minute

after connecting to the wall outlet. See 3 of “Connecting to a Wi-Fi

network.”

Confirm radio signal status

Click [Setting] in the main menu.

The certificate dialogue is displayed. When you input the administrator’s

user name and password, the administrator setting menu is displayed.

The factory setting of the administrator’s user name and password is set

to [admin].

Change the password from the factory setting for the security of your

devices.

Click [Network] of the administrator’s setting menu.

The [Network] menu is displayed.

Click the [Wi-Fi] tab to display the wireless setting menu.The radio

signal level and connection status are displayed.

Note

Check whether the strength of radio wave is fine. If sensitivity is less than

60 %, the following steps may help to improve the reception environment.

1. Change the camera setting position.

2. Adjust the antenna angle of the Wi-Fi router.

3. Change the setting position of the Wi-Fi router.

4. Install a repeater.

About indicators

The following shows the camera status by the color/lit/flashing/unlit condition of the

POWER indicator and NETWORK indicator.

POWER indicator lit

NETWORK indicator Camera status

Lights green Operating normally

Unlit Not connected to the network

Flashes orange WPS connection is not successful

POWER indicator flashing

NETWORK indicator Camera status

Repeats greenyelloworange Software version is being upgraded

Flashes green WPS is connecting

Repeats greenyellowunlitgreen

orangeunlit Initializing

POWER indicator unlit

NETWORK indicator Camera status

Unlit No power supplied

Lights green Starting

Lights orange Preparing to initialize

If you experience any difficulties while using this guide, check the following.

POWER indicator and NETWORK indicator are unlit.

The AC adapter is connected correctly.



The supplied AC adapter is used.



Do not use an extension cord or a power strip.



Try another wall outlet.



Video images are not displayed.

Check the notes *1 to *11 of “Help.”



Unplug the AC adapter from the wall outlet for 10 seconds, then plug it in again.



If video images are still not displayed, initialize this unit. For details, see “Initializing

this unit.”

Wi-Fi network connection cannot be established.

Confirm that your Wi-Fi router is

 Wi-Fi CERTIFIED compatible and

WPS compatible.

Validate the DHCP setting of your router.



If Wi-Fi connection is not established via WPS, connect to the Wi-Fi router manually.



For details, refer to User's Guide.

Perform “Connect to a wired network” and check “Confirm radio signal status” of



“Additional Informations.”

If you cannot connect to the network by the above operations, initialize this unit. For

details, see “Initializing this unit.”

The wired network connection cannot be established.

Confirm that the network cable is connected correctly to the camera, router, and



computer.

Validate the DHCP setting of your router.



Change the network cable since it may be broken.



The display flickered.

If the display flickers, set “Flickerless” to valid.

For details, refer to User's Guide.

This unit is inactive.

Unplug the AC adapter from the wall outlet for 10 seconds, then plug it in again.

With the unit turned on, press the reset switch with a ball-point pen, etc. The settings

will return to their factory defaults.

Reset switch

For the security of your devices

Change the password from the factory setting. The following are the factory settings

of this unit.

Administrator’s user name admin Administrator’s password admin

IP address IP address assigned automatically (DHCP)

Additional Informations Troubleshooting

Connecting to a wired network Initializing this unit

Product specificaties

Merk:	Sony
Categorie:	Bewakingscamera
Model:	SNC-CX600W
Kleur van het product:	Wit
Gewicht:	110 g
Breedte:	61 mm
Diepte:	41 mm
Hoogte:	95 mm
Gebruikershandleiding:	Ja
Materiaal behuizing:	Polycarbonaat (PC)
Wi-Fi-standaarden:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ondersteunde videoformaten:	H.264, M-JPEG
GPS:	Nee
Vormfactor:	kubus
Ondersteuning voor plaatsing:	Binnen
Connectiviteitstechnologie:	Bedraad en draadloos
Ethernet LAN:	Ja
Montagewijze:	Muur
Ondersteunde video-modi:	720p
Maximum resolutie:	1280 x 720 Pixels
Totaal aantal megapixels:	1.3 MP
Stroomuitvoer (volt):	+12V
Minimale belichting:	0.5 Lux
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	microSD (TransFlash), SDHC, SDXC
Ingebouwde HDD:	Nee
Nachtvisie:	Nee
Vaste focale lengte:	1.83 mm
Microfoon, line-in ingang:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Omvang optische sensor:	1/4 "
Aansluiting voor netstroomadapter:	Ja
Type beeldsensor:	CMOS
Optische zoom:	- x
Camera sluitertijd:	1/10000 s
Interface:	RJ-45
Ingebouwde microfoon:	Ja
Witbalans:	Auto, Lamp, Manual
Type camerasluiter:	Elektronisch
Ondersteunde grafische resoluties:	704 x 576,1024 x 576 (WSVGA),640 x 480 (VGA)
Bekabelingstechnologie:	10/100Base-T(X)
Temperatuur bij opslag:	-20 - 50 °C
Maximaal 30 frames per seconde:	30 fps
Ondersteunde netwerkprotocollen:	IPv4, TCP, UDP, ARP, ICMP, IGMP, HTTP, DHCP, DNS, NTP, RTP/RTCP, RTSP
Luchtvochtigheid bij opslag:	20 - 95 procent
Signaal/ruis-verhouding:	60 dB
Normal focusing bereik:	3 m
Dag/nacht modus:	Nee
Wifi:	Ja
AC-ingangsspanning:	5 V
Stroomverbruik (typisch):	5 W
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Kijkhoek lens, horizontaal:	120 °
Kijkhoek lens, verticaal:	64 °
Actieve ombevoegde demontage alarm:	Ja