Sony NWZ-S765 Walkman Handleiding

Sony Mp3 spelers NWZ-S765 Walkman

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Sony NWZ-S765 Walkman (2 pagina's) in de categorie Mp3 spelers. Deze handleiding was nuttig voor 108 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Quick Start Guide
How to Install the Bundled Software
How to Use Your β€œWALKMAN”
1 Connect your β€œWALKMAN” to your computer using
the USB cable (1), or the Micro USB cable ( ) 2
and charge cable (3).
2 Select the following order with the computer.
Select [start] - [My Computer] or [Computer] - [WALKMAN] -
[Storage Media].
3 Double-click [Setup.exe].
The install wizard appears.
 When you execute [Setup.exe], the [Setup.exe] file stored in the
[Storage Media] folder of your β€œWALKMAN” is copied to your
computer for backup, and WALKMAN Guide and Media Go are
installed to your computer.
4 Follow the on-screen instructions.
After executing [Setup.exe], the WALKMAN Guide shortcut appears
on the desktop of your computer.
5 Double-click (WALKMAN Guide) on the
desktop to start the WALKMAN Guide.
For details on transferring music, etc., refer to the User Guide
included in the WALKMAN Guide.
Β©2011 Sony Corporation Printed in Malaysia
Contents
Please check the items in the package.
 β€œWALKMAN” (1)
 Headphones (1)
 Earbuds (Size S, L) (1)
 Attachment (1)
Use when connecting your
β€œWALKMAN” to the cradle (not
supplied), etc.

 Quick Start Guide (this manual)
 Software
 The software is stored in the built-in
flash memory of your β€œWALKMAN,”
and includes the following items:
 Media Go
 WALKMAN Guide
 User Guide, etc.
 For details on how to install, refer to
β€œHow to Install the Bundled
Software (User Guide included)”.
NWZ-S763/S764/S765 only
 USB cable (1)
NWZ-S763BT/S764BT only
 Wireless Stereo Headphones (1)
 Earbuds for Wireless Stereo
Headphones (Size S, L) (1)
 Micro USB cable (1)
 Charge cable (1)

 User Guide for Wireless Stereo
Headphones (1)
About Windows Operating System
Make sure that the OS is Windows XP (Service Pack 3 or later), Windows Vista*1
(Service Pack 1 or later) or Windows 7*1.
*1 [Compatibility mode] for Windows XP is not supported.
How to Use your β€œWALKMAN”
BACK/HOME button
5-way button
OPTION/PWR OFF button
Charging the Battery
The battery of your β€œWALKMAN” is recharged while your β€œWALKMAN” is
connected to a running computer.
Charging...
About
3 hours
Charging
Fully-charged
Turning your β€œWALKMAN” On and Off
To turn on Press any button.
To turn off Press and hold the OPTION/PWR OFF
button.
ξ†Ύ Hint
 You can start the WALKMAN Guide and Media Go from the [start] menu (displayed by
clicking [start]).
 If you delete the [Setup.exe] file in your β€œWALKMAN” by formatting the built-in flash
memory of your β€œWALKMAN,” copy [Setup.exe] file and [Install] folder from the
[Backup] folder on the computer to your β€œWALKMAN.” Connect your β€œWALKMAN”
to the computer on which to install, and follow the above procedure from step 1 to
install. After installing, delete [Setup.exe] file and [Install] folder from your
β€œWALKMAN.”
The backup data is preserved in the following [C] drive on your computer by the default
install setting.
C:\Program Files*1\Sony\WALKMAN Guide\NWZ-S760\Backup
*1
[Program Files(x86)] may be displayed depending on the computer OS.
What can you do with the WALKMAN Guide ?
The WALKMAN Guide includes the following items:
 User Guide
The following contents can be viewed in your web browser.
 Details on how to use your β€œWALKMAN”
 How to use software to transfer content to your β€œWALKMAN”
 Troubleshooting
 Customer Registration Link
 Customer Support Link
 Other useful Links
Includes link information, etc., on the download site.
The bundled items differ depending on the country/region of purchase.
ξ†Ύ Hint
 After executing [Setup.exe], you can use the free space in the [Storage Media] folder
more effectively by formatting the built-in flash memory of your β€œWALKMAN.” To
format the built-in flash memory of your β€œWALKMAN,” see β€œTo initialize (format) your
β€œWALKMAN”” on the backside.
Transferring Music
From CDs, etc., using Media Go
Media Go supports data transfer from iTunes 10 to your β€œWALKMAN.”
By drag-and-drop using Windows Explorer
Note
 Media Go does not support contents that use digital rights management
technology (β€œWM-DRM”) for Windows Media. If your transfer β€œWM-DRM”
contents, use Windows Media Player. Refer to β€œSpecifications” - β€œSpecifications” -
β€œSupported file format” in the User Guide (HTML document) to check if your
β€œWALKMAN” support β€œWM-DRM” contents.
For details on transferring music, videos, photos or podcasts, refer to the User
Guide. The User Guide can be readily viewed from the WALKMAN Guide.
How to Install the Bundled Software (User Guide included)
NWZ-S763/S764/S765/S763BT/S764BT
Home menu
SensMeβ„’ Channels
FM Radio
Photos
Settings
Voice Recording
Videos
Music
Go to song
playback screen
Podcasts
Playlists
Bluetooth
How to use the Home menu
The Home menu appears when you press and hold the BACK/HOME button. The
Home menu is the starting point to play audio, search for songs, changing settings,
etc.
From the Home menu, you can select the desired item on the screen by using the 5-
way button.
Confirm.
Return to the previous screen.
About the manuals
In addition to this Quick Start Guide, this model is accompanied by the User
Guide (HTML document) which you can view from the WALKMAN Guide.
For details, refer to β€œHow to Install the Bundled Software (User Guide
included).”
Parts and Controls
To initialize (format) your β€œWALKMAN”
You can format the built-in flash memory of your β€œWALKMAN.” If the
memory is formatted, all files including the User Guide (HTML document)
will be erased and all setting values returned to their defaults. Be sure to verify
the files stored in memory prior to formatting, and then export any necessary
files to the hard disk of your computer or other device beforehand.
1 Press and hold the BACK/HOME button until the Home
menu appears.
2 Select [Settings] – [Common Settings] – [Reset/
Format] – [Format] – [Yes] – [Yes] in this order.
Press the / / / button to select the item, and then press the ξˆ„ ξ‡ͺ ξ‡° ξ‡– ξˆƒ
button to confirm.
When initialization finishes, [Memory formatted.] appears.
Note
 Do not format the built-in flash memory using Windows Explorer. If you
format the built-in flash memory, format it on your β€œWALKMAN.”
Troubleshooting
If your β€œWALKMAN” does not function as expected, try the following steps to
resolve the issue.
1 Find the symptoms of the issue in β€œTroubleshooting” in the
User Guide (HTML document), and try any corrective
actions listed.
For details on connecting to a computer, see the tables on the right.
2 Connect your β€œWALKMAN” to your computer to charge the
battery.
You may be able to resolve some issues by charging the battery.
3 Press the RESET button with a
small pin, etc.
Before resetting your β€œWALKMAN,” check that
no song, video, etc. is being played back. You
can then reset your β€œWALKMAN” safely.
4 Check information on the issue in
the Help of each software.
5 Look up information on the issue on one of the customer
support Web sites.
About the customer support Web sites, see β€œFor the latest information”.
6 If the approaches listed above fail to resolve the issue,
consult your nearest Sony dealer.
Symptom Cause/Remedy
Your β€œWALKMAN”
cannot charge the
battery.
 The USB cable is not connected to a USB connector
on your computer properly.
ξ…³ Disconnect the USB cable, and then reconnect it.
ξ…³ Use the supplied USB cable.
 The battery is charged in an ambient temperature out
of the range of 5 Β°C (41 Β°F) to 35 Β°C (95 Β°F).
ξ…³ You cannot charge the battery when the icon
appears. Charge the battery in an ambient
temperature of 5 Β°C (41 Β°F) to 35 Β°C (95 Β°F).
 The computer is not on.
ξ…³ Turn on the computer.
 Your computer has entered Sleep or Hibernation
status.
ξ…³ Release the computer from Sleep or Hibernation
status.
 A USB hub is being used.
ξ…³ Connecting your β€œWALKMAN” via a USB hub may
not work. Connect your β€œWALKMAN” to your
computer using the USB cable (supplied).
 The operating system installed on the computer is not
supported by your β€œWALKMAN.”
ξ…³ To charge your β€œWALKMAN,” connect your
β€œWALKMAN” to a computer with the operating
system that is supported by your β€œWALKMAN.”
 You have not used your β€œWALKMAN” for more than
a year.
ξ…³ Depending on the conditions under which your
β€œWALKMAN” is used, the battery may have been
deteriorated. Consult your nearest Sony dealer.
[Connected USB. The
player cannot be
operated.] or [Connected
USB (MTP). The player
cannot be operated.]
does not appear when
connected to the
computer with the USB
cable (supplied) (The
computer does not
recognize your
β€œWALKMAN”).
 The USB cable is not connected to a USB connector
on your computer properly.
ξ…³ Disconnect the USB cable, and then reconnect it.
ξ…³ Use the supplied USB cable.
 A USB hub is being used.
ξ…³ Connecting your β€œWALKMAN” via a USB hub may
not work. Connect your β€œWALKMAN” directly to
your computer using the USB cable (supplied).
 The USB connector on your computer may have a
problem.
ξ…³ Connect your β€œWALKMAN” to another USB
connector on your computer.
Symptom Cause/Remedy
[Connected USB. The
player cannot be
operated.] or [Connected
USB (MTP). The player
cannot be operated.]
does not appear when
connected to the
computer with the USB
cable (supplied) (The
computer does not
recognize your
β€œWALKMAN”).
(Continued)
 When you use your β€œWALKMAN” for the first time,
or when the battery is low, it may take your
β€œWALKMAN” about 30 seconds to display the
message after connected to a computer. This is not a
malfunction.
 The software authentication may be performed and it
may take rather a long time. Wait for a while.
 The software installation has been failed.
ξ…³ Reinstall the software by using the installer. The
imported data will remain untouched.
 The computer is running another software other than
the one used for transferring.
ξ…³ Disconnect the USB cable, wait a few minutes, and
reconnect it. If the problem persists, disconnect the
USB cable, restart the computer, and then
reconnect the USB cable.
Your β€œWALKMAN”
becomes unstable while
it is connected to the
computer.
 A USB hub or USB extension cable is being used.
ξ…³ Connecting your β€œWALKMAN” via a USB hub or
extension cable may not work. Connect your
β€œWALKMAN” directly to your computer using the
USB cable (supplied).
When double-clicking
[Setup.exe] to install the
bundled software,
[Setup.exe] does not
execute, and the
Properties window
opens.
 Install the bundled software after installing Windows
Media Player 11 or later. For details on Windows
Media Player, refer to the following web site:
http://support.microsoft.com/
 BACK/HOME button
ξ‘‚ 5-way button*1
ξˆƒ (play/pause/confirm) button
ξˆ„ ξ‡ͺ/ buttons
ξ‡° ξ‡–/ buttons
 Headphone jack
ξ‘„ WM-PORT jack
Connect the USB cable (supplied), or peripheral devices (not supplied).
ξ‘… Display
 Bluetooth indicator
 VOL +*1/– button
ξ‘ˆ OPTION/PWR OFF button
Press to display the option menu.
If you press and hold the OPTION/PWR OFF button, the screen turns off and your
β€œWALKMAN” enters standby mode.
 HOLD switch
ξ‘Š Strap hole
ξ‘‹ Microphone
Use to make voice recordings.
ξ‘Œ RESET button
Use a small pin, etc.
*1 There are tactile dots. Use them to help with button operations.
Precautions
About the headphones
 Avoid playing the unit at so loud a volume that extended play might affect your hearing.
 At a high volume outside sounds may become inaudible. Avoid listening to the
unit in situations where hearing must not be impaired, for example, while
driving or cycling.
License and Trademark Notice
Refer to the User Guide (HTML document).
Excessive sound pressure from earphones and headphones can cause hearing loss.
Do not expose the batteries (battery pack or batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
WALKMAN:
Rated current consumption 500 mA
For customers who purchased the set supplied with the Wireless Stereo
Headphones
Wireless Stereo Headphones:
Rated current consumption 100 mA
When replacing the headphones/earphones, please refer to the models of the headphones/
earphones adapted to your unit that appear below.
MDR-EX083, MDR-NWBT10
At high volume, prolonged listening to the personal audio player can
damage the user’s hearing.
Owner’s Record
The model and serial numbers are located on the back of the player. Record them in the
space provided below. Refer to these numbers in the spaces whenever you call upon your
Sony dealer regarding this product.
Model No. ________________________
Serial No. ________________________
RESET button
Hereby, Sony Corp., declares that this equipment is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
For details, please access the following URL:
http://www.compliance.sony.de/
Norway
Use of this radio equipment is not allowed in the geographical area within a radius
of 20 km from the centre of Ny-Alesund, Svalbard.
For the latest information
If you have any questions or issues with this product, or would like information on
compatible items with this product, visit the following web sites.
For customers in the USA:
http://www.sony.com/walkmansupport
For customers in Canada:
http://www.sony.ca/ElectronicsSupport/
For customers in Europe:
http://support.sony-europe.com/DNA
For customers in Latin America:
http://www.sony-latin.com/index.crp
For customers in other countries/regions:
http://www.sony-asia.com/support
For customers who purchased the overseas models:
http://www.sony.co.jp/overseas/support/


Product specificaties

Merk: Sony
Categorie: Mp3 spelers
Model: NWZ-S765 Walkman

Heb je hulp nodig?

Als je hulp nodig hebt met Sony NWZ-S765 Walkman stel dan hieronder een vraag en andere gebruikers zullen je antwoorden