Sony ICF-CD815 Handleiding

Sony Wekkerradio ICF-CD815

Lees hieronder de đź“– handleiding in het Nederlandse voor Sony ICF-CD815 (2 pagina's) in de categorie Wekkerradio. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
2-659-973- (1)24
© 2006 Sony Corporation Printed in China
ICF-CD815
Dream Machine is a trademark of Sony Corporation.
Operating Instructions
Owner’s Record
The model number and the serial number are located on the bottom.
Record the serial number in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No.
Serial No.
For customers who purchased this product in the USA
Please register this product on line at
http://www.sony.com/productregistration.
Proper registration will enable us to send you periodic mailings about new products, services, and
other important announcements. Registering your product will also allow us to contact you in the
unlikely event that the product needs adjustment or modification. Thank you.
FM/AM
CD Clock Radio
WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus
to rain or moisture.
To reduce the risk of fire, do not cover the ventilation of the
apparatus with newspapers, tablecloths, curtains, etc. And do not
place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not expose this
apparatus to dripping or splashing, and do not place objects
filled with liquids, such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
As the main plug is used to disconnect the unit from the mains,
connect the unit to an easily accessible AC outlet. Should you
notice an abnormality in the unit, disconnect the main plug from
the AC outlet immediately.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority to
operate this equipment.
The unit is not disconnected from the AC power source (mains)
as long as it is connected to the wall outlet, even if the unit itself
has been turned off.
The nameplate and important information concerning safety are
located on the bottom exterior.
CAUTION
The use of optical instruments with this product will increase
eye hazard.
This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician
for help.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
25
Z
TIME SET
RADIO ON
TRACK
SLEEP
CLOCK SET
CD
OFF
ALARM RESET
SNOOZE/SLEEP OFF
VOLUME
BAND
TUNING
kHz
AM
FM AM
MHz
FM
BRIGHTNESS
H LM
TRACK
ALARM A ALARM B
AUDIO IN
PM
A B
AUDIO IN
OFF
CD
RADIO
BUZZER
AUDIO
IN
Listening to the sound
from the connected
optional components
1
Connect the jack of this player with theAUDIO IN
line output jack or headphones jack of the optional
component (ex: portable music players) using the stereo
audio connecting cable.
2
Press .AUDIO IN
The AUDIO IN indicator lights up.
3
Play the optional component connected to the AUDIO
IN jack of this player.
4
Adjust .VOLUME
• To turn off the AUDIO IN, press .x OFF
Note
Connect the cable firmly to avoid any malfunction.
Setting the Alarm
This unit is equipped with 3 alarm modes—CD, RADIO and
buzzer. Before setting the alarm, make sure to set the clock (see
“Setting the Clock”). This unit is also equipped with a dual
alarm function. You can set the alarm for two different times
ALARM A and ALARM B.
To set the Alarm time
1
If you will select the CD alarm or RADIO alarm, adjust
the volume.
Also, if you will select the RADIO alarm, tune in to the
desired station.
2
Set the selector to , orALARM MODE CD RADIO
BUZZER ALARM A B. The or indicator lights up.
3
Press or for a few seconds.ALARM A B
The or indicator flashes, depending onALARM A B
which one you set.
The hour will start to flash in the display.
4
Press or until the desired hour appears.TIME SET + –
To set the hour rapidly, hold down TIME SET + –or .
5
Press or .ALARM A B
The minute will flash.
6
Repeat step to set the minute and press 4 ALARM A
or .B
The wake-up track number flashes on the display.
7
IF you selected the CD alarm, press or to> .
select the desired wake-up track number.
The wake-up track number can be set up to 99. Its default
value is “01”.
8
Press or .ALARM A B
The or indicator lights up.ALARM A B
For the CD alarm, the track you specified as the Wake-up track
is played first.
To check the Alarm time
Press or . The display shows the alarm time.ALARM A B
If you press or again, the indication changes to theALARM A B
wake-up track number.
After a few seconds, the display returns to the current time.
• Alarm time in CD alarm, radio alarm and buzzer alarm is set
at PM 12:00 when you purchased the unit.
ALARM ON
For the CD alarm, the track you specified as the
Wake-up track is played first.
If you set the CD alarm when there is no disc in the CD player
or the CD compartment lid is open, the buzzer alarm will sound
at the set time.
For the radio alarm, the station that the tuning dial is
set to will be received.
For the buzzer alarm, the beeping of the alarm
becomes more rapid after every few seconds in three
progressive stages.
Note
When ALARM A and ALARM B are set for the same time, only
ALARM A will result.
To doze for a few more minutes
Press .SNOOZE/SLEEP OFF
The CD, radio or buzzer alarm turns off but will be
automatically activated again after about 10 minutes. Every
time you press , the snooze timeSNOOZE/SLEEP OFF
changes as follows:
10 20
50 60
30
40
The display shows the snooze time for a few seconds and returns
to show the current time. When you press SNOOZE/SLEEP
OFF after the current time appeared, the snooze time starts from
10 minutes again.
• The maximum length of the snooze time is 60 minutes.
ALARM OFF
The alarm is turned off automatically after 60 minutes.
To stop the Alarm
Press to turn off the alarm.ALARM RESET
The alarm will come on again at the same time the next day.
To deactivate the Alarm
Set the selector to . ALARM MODE OFF ALARM A
or indicator goes off.ALARM B
Setting the Sleep Timer
You can fall asleep to the CD, RADIO, or AUDIO IN using the
built-in sleep timer that turns off the CD, RADIO or AUDIO IN
automatically after a preset duration.
Press during CD, RADIO, or AUDIO IN play.SLEEP
You can set the Sleep Timer to durations of 90, 60, 30, or 15
minutes. Every push changes the display as follows:
OFF (current time) 90 60
30
15
The CD, RADIO, or AUDIO IN will play for the time you set,
then turn off.
• To turn off the CD, RADIO or AUDIO IN before the preset
time, press SNOOZE/SLEEP OFF.
Note
Even if the Sleep Timer is set, it cannot turn off the power of
optional components connected to the AUDIO IN jack of this player.
To use both the Sleep Timer and
the Alarm
You can fall asleep to the CD, RADIO or AUDIO IN and be
awakened by the CD, RADIO or buzzer alarm.
1
Set the alarm. (See “Setting the Alarm”.)
2 Set the Sleep Timer. (See “Setting the Sleep Timer”.)
Note
This unit cannot select the alarm in AUDIO IN.
Changing the
Brightness of the clock
display
Slide to select H(high), M(middle) or L(low)BRIGHTNESS
for the display according to your preference.
Setting the clock
1 Plug in the unit.
The display will flash “12:00”.
2Press for a few seconds.CLOCK SET
The hour will start to flash in the display.
3 Press or until the correct hourTIME SET + –
appears in the display.
4Press once.CLOCK SET
5 Repeat steps and to set the minute.3 4
After setting the minute, press CLOCK SET to start the
counting of the seconds.
• To set the current time rapidly, hold down TIME SET + –or .
• During PM hours, the indicator lights up.
• In step , when you press after the minute5CLOCK SET
setting to activate the clock, the seconds start counting from
zero.
Playing a CD
An 8 cm (3-inch) CD can be played without an adaptor.
1 Pull to open the CD compartmentZ PULL OPEN
lid and place a disc.
2 Close the CD compartment lid.
3Press .CD u
TRACK “01” appears in the display to indicate that track 1
of the CD is playing.
After you press , it takes about 10 seconds beforeCD u
the music starts.
The indication in the display returns to the current time a
few seconds after the music starts.
4Turn to adjust the volume.VOLUME
* AMS = Automatic Music Sensor
**These operations are possible during both play and
pause.
• During CD playback, every time you press TRACK, the track
number appears in the display for a few seconds.
About CD-Rs/CD-RWs
This unit is compatible with CD-Rs/CD-RWs but playback
capability may vary depending on the quality of the disc, the
recording device and application software.
Music discs encoded with copyright
protection technologies
This product is designed to play back discs that conform to the
Compact Disc (CD) standard.
Recently, various music discs encoded with copyright protection
technologies are marketed by some record companies. Please be
aware that among those discs, there are some that do not
conform to the CD standard and may not be playable by this
product.
To handle compact discs
Correct
Handle the disc by its edge.
Incorrect
Do not touch the surface.
Do not stick paper or tape nor write
anything on the surface.
Note on DualDiscs
A DualDisc is a two sided disc product which mates DVD
recorded material on one side with digital audio material on the
other side. However, since the audio material side does not
conform to the Compact Disc (CD) standard, playback on this
product is not guaranteed.
Notes
• Discs with non-standard shapes (e.g., heart, square, star)
cannot be played on this unit. Attempting to do so may
damage the unit. Do not use such discs.
• If you press CD when there is no disc in the CDu
compartment, “00” flashes for a few seconds on the display
and the unit turns off automatically.
Playing the radio
1 Press to turn on the radio.RADIO ON
“ ” appears in the display.On
2 Adjust .VOLUME
3 Select .BAND
4 Tune in a station using the dial.TUNING
• To turn off the radio, press .x OFF
• This model does not support FM stereo.
Improving the
reception
FM: The AC power cord functions as an FM antenna.
Extend the AC power cord fully to improve FM reception.
AM: Rotate the unit horizontally for optimum reception. A
ferrite bar antenna is built into the unit.
Do not operate the unit over a steel desk or metal surface, as this
may lead to interference of reception.
AC power cord
(The AC power
cord functions as
an FM antenna.)
CD has a tactile dot.u
There is a tactile dot beside volume to
show the direction to turn up the volume.
To
Pause
Resume play after pause
Locate the beginning of
the current track (AMS*)
Locate the next track
(AMS)
Go back at high speed
Go forward at high speed
Locate the previous track
(AMS)
Locate the succeeding
track (AMS)
Stop play
Press
CD u
CD u again
.**
>**
Hold down **.
Hold down **>
. repeatedly**
> repeatedly**
x OFF
ALARM MODE
selector
Features
•
Easy to see large green LED display with three brightness
control position (high/mid/low)
•
Built-in jack for portable music players
•
Built-in CD player with CD-R/RW playback function
• Wake to any track of a CD, RADIO or Buzzer (dual alarm)
•
Extendable snooze time from 10 to 60 minutes
Precautions
• Operate the unit on the power source specified in the
“Specifications.”
• To disconnect the AC power cord (mains lead), pull it out by
the plug, not the cord.
• Do not leave the unit in a location near a heat source such as a
radiator or air duct, or in a place subject to direct sunlight,
excessive dust, mechanical vibration, or shock.
•
Allow adequate air circulation to prevent internal heat build-up.
Do not place the unit on a surface (a rug, a blanket, etc.) or near
materials (a curtain) which might block the ventilation holes.
•
Should any solid object or liquid fall into the unit, unplug the
unit and have it checked by a qualified personnel before
operating it any further.
•
To clean the casing, use a soft cloth dampened with a mild
detergent solution.
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
Troubleshooting
Should any problem persist after you have made the following
checks, consult your nearest Sony dealer.
The clock does not show the correct time.
• Has an electrical power outage occurred?
The CD, radio or buzzer alarm does not sound at the
preset alarm time.
• Is the indicator light on?ALARM
The radio alarm is activated but no sound comes on at
the preset alarm time.
• Is the dial set to a receivable radio station?TUNING
• Has VOLUME been adjusted ?
The CD player does not operate.
• Did you close the CD lid?
• Did you place the disc correctly?
The disc should be placed with the labeled side up.
• Dusty or defective disc — Clean the disc with an optional
cleaning cloth. Wipe the disc from the center out.
• Take out the CD and leave the CD compartment open for
about an hour to remove moisture condensation.
Sporadic loss of sound in CD operation.
• Dusty or defective disc — Clean or replace the disc.
• Volume too high — Reduce the volume.
• Strong vibration.
There is no sound or sound output is low by pressing
the AUDIO IN button.
• Is the AUDIO IN indicator light on?
• If the volume of the optional component is low, turn up the
volume on the component.
The radio gets interference.
• When used near electrical devices, move them away or turn off
their power.
Specifications
CD player section
System: Compact disc digital audio system
Laser diode properties:
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about
200 mm from the objective lens surface on the optical pick-
up block with 7mm aperture.)
Frequency response: 20 - 20 000 Hz
+1
– 2
dB
Wow and flutter: Below measurable limit
Radio section
Frequency range:
FM: 87.5-108 MHz
AM: 530-1 710 kHz
General
Time display:
12-hour system
Speaker:
57 mm (2 1/4inches) dia., 8 Ω
Input:
Audio In jack (stereo minijack): minimum input level 245 mV
,
impedance 47 kΩ
Power outputs:
0.7 W + 0.7 W (at 10% harmonic distortion)
Power requirements:
120 V AC, 60 Hz
Dimensions:
Approx. 190 93 222 mm (w/h/d) (Approx. 7 Ă— Ă— 1/2Ă— 3 2/3Ă—
83/4 inches) incl. projecting parts and controls
Mass:
Approx. 1.5 kg (3 lb 5 oz)
Supplied accessories:
Audio cable (1)
Design and specifications are subject to change without notice.
ALARM A ALARM B
AUDIO IN indicator


Product specificaties

Merk: Sony
Categorie: Wekkerradio
Model: ICF-CD815

Heb je hulp nodig?

Als je hulp nodig hebt met Sony ICF-CD815 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wekkerradio Sony

Handleiding Wekkerradio

Nieuwste handleidingen voor Wekkerradio