Sony CMT-V75BTiP Handleiding

Sony Hifi systeem CMT-V75BTiP

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony CMT-V75BTiP (4 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

WARNING

To reduce the risk of fire, do not cover the ventilation

opening of the apparatus with newspapers, tablecloths,

curtains, etc. Do not place the naked flame sources such

as lighted candles on the apparatus.

To reduce the risk of fire or electric shock, do not expose

this apparatus to dripping or splashing, and do not

place objects filled with liquids, such as vases, on the

apparatus.

Do not install the appliance in a confined space, such as

a bookcase or built-in cabinet.

As the main plug is used to disconnect the unit from

the mains, connect the unit to an easily accessible

AC outlet. Should you notice an abnormality in the

unit, disconnect the main plug from the AC outlet

immediately.

Do not expose batteries or apparatus with battery-

installed to excessive heat such as sunshine, fire or the

like.

The unit is not disconnected from the mains as long as

it is connected to the AC outlet, even if the unit itself has

been turned off.

The nameplate is located on the bottom exterior of the

unit.

Excessive sound pressure from earphones and

headphones can cause hearing loss.

CAUTION

The use of optical instruments with this product will

increase eye hazard.

This appliance is classified

as a CLASS 1 LASER

product. This marking

is located on the bottom

exterior of the unit.

Notice for customers: the following

information is only applicable to

equipment sold in countries applying EU

directives.

This product has been manufactured by or on behalf

of Sony Corporation, 1-7-1 Konan Minato-ku Tokyo,

108-0075 Japan. Inquiries related to product compliance

based on European Union legislation shall be addressed

to the authorized representative, Sony Deutschland

GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters, please

refer to the addresses provided in the separate service or

guarantee documents.

For customers in Europe and Australia

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on its packaging

indicates that this product shall not be treated as

household waste. Instead it shall be handed over to

the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment

and human health, which could otherwise be caused

by inappropriate waste handling of this product. The

recycling of materials will help to conserve natural

resources. For more detailed information about

recycling of this product, please contact your local Civic

Office, your household waste disposal service or the

shop where you purchased the product.

Applicable accessory: Remote commander

Disposal of waste batteries

(applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the battery or on the packaging indicates

that the battery provided with this product shall not be

treated as household waste.

On certain batteries this symbol might be used in

combination with a chemical symbol. The chemical

symbols for mercury (Hg) or lead (Pb) are added if the

battery contains more than 0.0005% mercury or 0.004%

lead.

By ensuring these batteries are disposed of correctly,

you will help prevent potentially negative consequences

for the environment and human health which could

otherwise be caused by inappropriate waste handling of

the battery. The recycling of the materials will help to

conserve natural resources.

In case of products that for safety, performance or data

integrity reasons require a permanent connection with

an incorporated battery, this battery should be replaced

by qualified service staff only. To ensure that the battery

will be treated properly, hand over the product at end-

of-life to the applicable collection point for the recycling

of electrical and electronic equipment.

For all other batteries, please view the section on how

to remove the battery from the product safely. Hand the

battery over to the applicable collection point for the

recycling of waste batteries.

For more detailed information about recycling of this

product or battery, please contact your local Civic

Office, your household waste disposal service or the

shop where you purchased the product.

This equipment has been tested and found to comply

with the limits set out in the EMC Directive using a

connection cable shorter than 3 meters.

Hereby, Sony Corp., declares that this equipment is in

compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC. For details,

please access the following URL:

http://www.compliance.sony.de/

Norway:

Use of this radio equipment is not allowed in the

geographical area within a radius of 20 km from the

centre of Ny-Alesund, Svalbard.

Note on DualDiscs

A DualDisc is a two sided disc product which mates

DVD recorded material on one side with digital

audio material on the other side. However, since the

audio material side does not conform to the Compact

Disc (CD) standard, playback on this product is not

guaranteed.

Music discs encoded with copyright

protection technologies

This product is designed to playback discs that conform

to the Compact Disc (CD) standard. Recently, various

music discs encoded with copyright protection

technologies are marketed by some record companies.

Please be aware that among those discs, there are some

that do not conform to the CD standard and may not be

playable by this product.

License and Trademark Notice

iPhone, iPod, iPod classic, iPod nano, and iPod touch

are trademarks of Apple Inc., registered in the U.S. and

other countries. iPad is a trademark of Apple Inc.

MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and Thomson.

Windows Media is either a registered trademark or

trademark of Microsoft Corporation in the United

States and/or other countries.

This product is protected by certain intellectual

property rights of Microsoft Corporation. Use or

distribution of such technology outside of this product

is prohibited without a license from Microsoft or an

authorized Microsoft subsidiary.

All other trademarks and registered trademarks are

of their respective holders. In this manual, ™ and ®

marks are not specified.



Europe OnlyEurope Only

Getting Started

About the function indicator 

The function indicator lights in different colors

according to the function. You can tell the current

function by the color of the indicator.

The indicator color of each function is same color as that

of the corresponding FUNCTION button on the remote.

Function Button on the

remote

Indicator color

DAB DAB Pink

FM FM Sky blue

AUDIO IN AUDIO IN Amber

CD CD Yellow

iPod iPod White

BT AUDIO

(Bluetooth)

BLUETOOTH Blue

Remote

*1   (Illumination) button

Turn ON/OFF the dock indicator .

This manual mainly explains operations using the

remote, but the same operations can also be performed

using the buttons on the unit having the same or

similar names.

The function indicated by pink on the remote can be

activated using SHIFT . If you want to operate the 

function indicated by pink, press and hold SHIFT 

and press the button of the function indicated by pink.

If you press the button without holding the SHIFT 

pressed the system activates the function indicated by

white.



Attaching a protective cushion

Attach the supplied protective cushion to avoid contact

of an iPod/iPhone/iPad with the front panel of the

system.

You can protect against scratching the front panel

and your iPod/iPhone/iPad by attaching the supplied

protective cushion.

Protective cushion

Adjust the attaching position of the protective cushion

to suit to your iPod/iPhone/iPad.

Setting the clock

1 Press   to turn on the system.

2 Press and hold SHIFT  and TIMER MENU  to

select the clock set mode.

If “PLAY SET” flashes, press /    repeatedly to

select “CLOCK,” and then press (enter) .

3 Press  / repeatedly to set the hour, then press

(enter) .

4 Use the same procedure to set the minutes.

Note

The clock settings are reset when you disconnect the power cord or if

a power failure occurs.

To display the clock when the system is off

Press DISPLAY . The clock is displayed for about

8 seconds.

Reception of DAB/DAB+ radio station

When you turn on the system for the first time after

you purchase the system, DAB Automatic Scan starts

automatically and creates a list of available services.

During the DAB Automatic Scan, “ ” 

appears. Do not press any button on the unit or the

remote during DAB Automatic Scan. Scanning is

interrupted and service list may not be created properly.

To run the DAB Automatic Scan manually, perform

the procedure of “Running the DAB Automatic Scan

manually” in “Listening to the radio.” If you have moved

to another area, perform the DAB Automatic Scan

manually and re-register the contents of broadcasts.

Operations

Playing a CD/MP3 disc

1 Select the CD function.

Press CD FUNCTION  on the remote or press

FUNCTION  on the unit repeatedly.

The function indicator lights in yellow.

2 Insert a disc.

Insert a disc in the disc slot with the label side facing

forward.

Insert a disc with

the label side facing

forward.

 Eject a disc

Playback starts automatically after “READING”

disappear.

When you changing from another function to the CD

function while a disc is already inserted in the disc

slot, press  on the remote or press  on

the unit to start playback.

Notes

When you turn on the system, the disc will not be pulled into the

disc slot until “NO DISC” appears in the display. Do not attempt to

push in the disc until “NO DISC” appears.

If you cannot insert the disc into the disc slot even when “NO

DISC” appears in the display, there may already be a disc in the

slot. Press and hold down to eject such a disc forcibly. If even  

the system does not then eject the disc, contact your nearest Sony

dealer.

If you cannot eject the disc and “LOCKED” appears in the display,

contact your nearest Sony dealer.

Do not insert a disc with non-standard shapes (e.g., heart, square,

star). The disc may fall into the system and cause irreparable

damage.

When pressing on the unit and then reinserting the disc that  

appears in the disc slot, do not simply push in the disc. Remove the

disc from the disc slot and then reinsert it.

Do not turn off the system with a disc halfway inserted in the disc

slot. Doing so may cause the disc to fall.

Do not use a disc with tape, seals or paste on it as this may cause

malfunction.

When you eject a disc, handle the disc by its edge. Do not touch

the surface.

Do not insert an 8 cm disc with an adapter. Doing so may cause the

system to malfunction.

Other operations

To Press

Pause playback  (or  on the unit). To

resume play, press the button again.

Stop playback  .

Select a folder on

an MP3 disc +/ .

Select a track or

file

 / .

Find a point in a

track or file

Hold down /    (or

 /  on the unit) during

playback, and release the button at

the desired point.

Select Repeat Play REPEAT  repeatedly until “ ”

or “ 1” appears.

Eject a disc   on the unit.

To change the play mode

Press PLAY MODE  repeatedly while the player is

stopped. You can select Normal Play mode (“FLDR”

for all MP3 files in the folder on the disc), Shuffle Play

mode (“SHUF” or “FLDR SHUF*” for folder shuffle), or

Program Play mode (“PGM”).

* When playing a CD-DA (audio) disc, FLDR or FLDR SHUF Play

performs the same operation as Normal or SHUF Play.

Notes on Repeat Play

“ ” indicates that all tracks or files will be repeated until you stop

playback.

“ 1” indicates that a single track or file will be repeated until you

stop playback.

Notes on Shuffle Play mode

When Shuffle Play mode is set to “SHUF,” the system shuffle-plays

all tracks or files on the disc. When Shuffle Play mode is set to

“FLDR SHUF,” the system shuffle-plays all tracks or files in selected

folder.

When you turn off the system, the selected Shuffle Play mode

(“SHUF” or “FLDR SHUF”) is cleared and the play mode returns to

Normal or FLDR Play mode.

Notes on playing MP3 discs

Do not save other types of tracks or files, or unnecessary folders on

a disc that has MP3 files.

Folders that have no MP3 files are skipped.

The system can only play MP3 files that have a file extension of

“.mp3.”

Even when file name has the “.mp3” file extension, if the actual

file differs, playing this file may generate a loud noise which could

damage the system may malfunction.

The maximum number of:

 999* folders (including the root folder)

 999 MP3 files

 250 MP3 files in a single folder

 8 folder levels (in the tree structure of files)

Compatibility with all MP3 encoding/writing software, recording

device, and recording media cannot be guaranteed. Incompatible

MP3 discs may produce noise or interrupted audio or may not play

at all.

* This include folders that have no MP3 or other files. The number

of folders that the system can recognize may be less than actual

number of folders, depending on the folder structure.



Creating your own program

(Program Play)

1 Select the CD function.

Press CD FUNCTION  on the remote or press

FUNCTION  on the unit repeatedly.

The function indicator lights in yellow.

2 Select the play mode.

Press PLAY MODE  repeatedly until “PGM”

appears while the player is stopped.

3 Select a folder (MP3 disc only).

Press +/  repeatedly to select the desired

folder. If you want to program all files in the folder,

press .

4 Select the desired track or file number.

Press /    repeatedly until the desired track

or file number appears.

Selected track or file

number

Total playing time of the

selected track or file

5 Program the selected track or file.

Press  to enter the selected track or file.

“--.--” appears when the total playing time exceeds

100 minutes for an CD or when you program an MP3

files.

6 Repeat steps 3 through 5 to program additional

tracks or files, up to a total of 25 tracks or files.

7 To play your program of tracks or files, press 

(or on the unit). 

The program remains available until you remove the

disc from the disc slot or unplug the power cord. 

To play the same program again, press  (or

  on the unit).

To cancel Program Play

Press PLAY MODE  repeatedly until “PGM”

disappears while the player is stopped.

To delete the last track or file of the program

Press and hold SHIFT  and CLEAR  while the

player is stopped.

Listening to the radio

Tuning in a FM station

1 Select the FM function.

Press FM FUNCTION  on the remote or press

FUNCTION  on the unit repeatedly.

The function indicator lights in sky blue.

2 Perform tuning.

For automatic scanning

Press TUNING MODE  repeatedly until “AUTO”

appears, and then press +/ . Scanning stops

automatically when a station is tuned in, and

“STEREO” (for stereo programs only) light up in the

display.

If the scanning does not stop, press  to stop

scanning, then perform manual tuning (below).

When you tune in a station that provides RDS

services, information such as the service name or

station name is provided by broadcasts.

For manual tuning

Press TUNING MODE  repeatedly until

“MANUAL” appears, and then press +/ 

repeatedly to tune in the desired station.

Running the DAB Automatic Scan manually

Before you can tune in DAB/DAB+ stations, you must

perform a DAB Initial Scan.

When you have moved to another area, also perform the

DAB Initial Scan manually to update the DAB/DAB+

service information.

1 Select the DAB function.

Press DAB FUNCTION on the remote or press 

FUNCTION on the unit repeatedly.

The function indicator lights in pink.

2 Press TOOL MENU to start the DAB Automatic 

Scan.

“INITIAL SCAN” appear.

3 Press  to perform scanning.

Scanning begins. The scanning progress is indicated

by asterisks ( ). Depending on the DAB/

DAB+ services available in your area, scanning may

take a few minutes.

When scanning is complete, a list of available services

is created.

Notes

If your country or region does not support DAB/DAB+ broadcast,

“NO SERV” appears.

This procedure clears all previously stored presets.

Before unplugging the DAB/FM antenna, make sure the system is

turned off to preserve your own DAB/DAB+ settings.



  (phones) jack

Connect the headphones.

 AUDIO IN jack

Connect an optional audio component.

 Power (DC IN 19.5 V)

1 Connect the power cord to the AC adapter.

2 Connect the AC adapter to the unit, and then plug

the power cord in to a wall outlet.

 DAB/FM antennas

Find a location and an orientation that provide good

reception, and then set up the antennas.

Keep the antennas away from the power cord to avoid

picking up noise.

To use the iPod/iPhone/iPad

1 Open the dock by pushing the center of the dock.

Dock

2 Place the iPod/iPhone/iPad.

Note

Be careful not to drop the unit when disconnecting an iPod/iPhone/

iPad from the iPod/iPhone/iPad connector.

 DAB/FM lead antenna (Extend it horizontally.)

 To AC Adapter

To use the remote

Slide and remove the battery compartment lid, and

insert the two supplied R6 (size AA) batteries, side 

first, matching the polarities shown below.

Notes on using the remote

With normal use, the batteries should last for about 6 months.

Do not mix an old battery with a new one or mix different types of

batteries.

If you do not use the remote for a long period of time, remove the

batteries to avoid damage from battery leakage and corrosion.



Location of Controls

Unit (Top)

Touch Panel*

 Display

 Disc slot

Unit (Front)

Function indicator

Remote sensor

iPod/iPhone/iPad connector

Dock indicator

* The system is set at the factory for the key-

touch confirmation beep to sound when you

press a touch panel key on the unit. You can

turn off the beep sound.

* The system is set at the factory for the key-

touch confirmation beep to sound when you

press a touch panel key on the unit. You can

turn off the beep sound.

When placing or removing the iPod/iPhone/iPad, brace the system

with one hand and take care not to press the controls of the iPod/

iPhone/iPad by mistake.

To change the volume level, use VOLUME +/ . The volume

level does not change if you adjust it on the iPod/iPhone/iPad.

To use an iPod/iPhone/iPad, refer to the user’s guide of your

iPod/iPhone/iPad.

Sony cannot accept responsibility in the event that data recorded to

iPod/iPhone/iPad is lost or damaged when using an iPod/iPhone/

iPad with this system.

Using the Bluetooth function

You can listen to music from your Bluetooth mobile

phone or Bluetooth device over a wireless connection.

The system

Bluetooth device such as

a Bluetooth “Walkman”

This system supports the Bluetooth A2DP and AVRCP

profiles. For details on Bluetooth wireless technology,

see “Bluetooth wireless technology.”

Check the website below for the latest information about

compatible devices.

http://support.sony-europe.com/

About the indicator for Bluetooth

The function indicator lights or flashes in blue to allow

checking the Bluetooth status.

System status Indication status

The system is in Bluetooth

Standby (when the system

is on)

Flashes slowly in blue.

During Bluetooth pairing Flashes quickly in blue.

The system is attempting to

connect with a Bluetooth

device

Flashes in blue.

The system has established

in connection with a

Bluetooth device

Lit in blue.

Pairing this system with a Bluetooth

device

Pairing is an operation where Bluetooth devices register

with each other beforehand. Use the procedure below

to pair the system with your Bluetooth device. Once

a pairing operation is performed, it does not need to

be performed again. If pairing is already completed,

proceed to “Playing music from a Bluetooth device.”

1 Place the Bluetooth device to be connected to this

system within 1 meter of the system.

2 Select the BLUETOOTH function.

Press BLUETOOTH FUNCTION on the remote 

or press FUNCTION on the unit repeatedly.

The function indicator flashes slowly in blue and “BT

AUDIO” appears in the display.

If already connected with a Bluetooth device that

has been connected with this system in the past by

automatic connection, press (Bluetooth) on the 

unit to cancel the connected Bluetooth device. “BT

AUDIO” appears.

3 Press and hold (Bluetooth) on the unit for 2 

seconds or longer.

The function indicator lights quickly in blue and

“PAIRING” flashes. The system is in Pairing mode.

4 Operate the Bluetooth device and perform the

pairing operation.

For details on operations of the Bluetooth device,

refer to the operation manual supplied with your

Bluetooth device.

When searching for this system with the Bluetooth

device, a list of the devices found may appear on the

Bluetooth device display, depending on the type of

Bluetooth device.

This system appears as “CMT-V75BTiP (S).”

When establishing a connection with this system,

select the audio profile (A2DP, AVRCP) at the

Bluetooth device. If the Bluetooth device does not

support the AVRCP profile, you cannot perform

playback or other operations with the system.

5 Select “CMT-V75BTiP(S)” on the display of the

Bluetooth device.

If prompted to enter a passkey on the Bluetooth

device, enter “0000.”

6 Operate the Bluetooth device and perform the

Bluetooth connection.

When pairing is completed and connection with

the Bluetooth device is established correctly, “BT

AUDIO” appears and the function indicator flashes

slowly in blue.

Depending on the type of Bluetooth device,

connection may start automatically after paring is

completed.

Notes

“Passkey” may be called “Passcode,” “PIN code,” “PIN number” or

“Password,” etc., depending on the device.

The pairing standby status of the system is cancelled after about 5

minutes. If pairing is not successful, redo the procedure from step 1.

While connected to a Bluetooth device, this system cannot be

detected and connection cannot be established from another

Bluetooth device.

If you want to pair with several Bluetooth devices, perform the

procedure from step1 to 6 individually for each Bluetooth device.



Tuning in a DAB/DAB+ station

Before tuning in DAB/DAB+ stations, make sure that

the DAB Initial Scan has been performed.

1 Select the DAB function.

Press DAB FUNCTION  on the remote or press

FUNCTION  on the unit repeatedly.

The function indicator lights in pink.

2 Perform tuning.

Press TUNING MODE  repeatedly until “AUTO”

appears, and then press +/  to select a station.

When you tune in a station that provides RDS

services, information such as the service name or

station name is provided by broadcasts.

Notes on DAB/DAB+ stations

When tuning in a DAB/DAB+ station, it may take a few seconds

before you hear any sound.

Primary service is automatically received when secondary service

ends.

This tuner does not support data services.

Tip

To reduce static noise on a weak FM stereo station, press FM MODE

 repeatedly until “MONO” appears to turn off stereo reception.

Presetting radio stations

1 Tune in the desired station.

2 Press TUNER MEMORY  to select the tuner

memory mode.

Preset number

3 Press +/  repeatedly to select the desired

preset number.

If another station is already assigned to the selected

preset number, the station is replaced by the new

station.

4 Press  to register the station.

5 Repeat steps 1 through 4 to register other stations.

You can preset up to 20 DAB/DAB+ and 20 FM

stations.

Notes on presetting DAB/DAB+ stations

You can preset a DAB/DAB+ service only when it can be received.

If you select an unregistered preset number, “NO PRESET” appears

in the display.

To tune in to a preset radio station

If you registered a radio station to a preset number 1

to 6, the radio station will be tuned in by just pressing

the TUNER MEMORY NUMBER (1 to 6) when the 

system function is set to FM or DAB.

If you registered a radio station to a preset number 7

or higher, press TUNING MODE repeatedly until 

“PRESET” appears then press +/- repeatedly to select 

the desired preset number.

Playing the iPod/iPhone/iPad

1 Select the iPod function.

Press iPod FUNCTION  on the remote or press

FUNCTION  on the unit repeatedly.

The function indicator lights in white.

2 Place the iPod/iPhone/iPad.

3 Start playback.

Press  on the remote or press  on the

unit.

To control the iPod/iPhone/iPad

To Press

Pause playback    / .

Select a track

or chapter of

audiobook/

podcast

 /

. To fast-forward or

fast-rewind, hold down the button.

Find a point in a

track or chapter

of audiobook/

podcast

Hold down /    during

playback, and release the button at

the desired point.

Choose the

selected item

.

Scroll up/down

the iPod menus

 / .

Return to the

previous menu or

select a menu

TOOL MENU /RETURN .

To use the system as a battery charger

You can use the system as a battery charger for an iPod/

iPhone/iPad whether the system is on or off.

To see whether charging is operating or not, check the

battery icon of the iPod/iPhone/iPad display. Check the

“iPod/iPhone/iPad section” of the “Specifications” for

a list of iPod/iPhone/iPad models compatible with this

system.

To stop charging an iPod/iPhone/iPad

Remove the iPod/iPhone/iPad.

Note on charging an iPod/iPhone/iPad

If you press DISPLAY  while charging when the system is off, the

system stops charging an iPod/iPhone/iPad. To restart charging of an

iPod/iPhone/iPad, reconnect the iPod/iPhone/iPad when the display

mode is Power Saving mode.

Notes

The performance of the system may be vary, depending on the

specifications of your iPod/iPhone/iPad.

When placing or removing the iPod/iPhone/iPad, handle the

iPod/iPhone/iPad in the same angle as that of the iPod/iPhone/iPad

connector on the unit and do not twist or sway the iPod/iPhone/

iPad to prevent connector damage.

Do not carry the system with an iPod/iPhone/iPad set on the

connector. Doing so may cause a malfunction.



4-418-714- (1)14

Micro HI-FI

Component System

GB Operating Instructions

CMT-V75BTiP

To erase all the pairing registration

information

1 Select the BLUETOOTH function.

Press BLUETOOTH FUNCTION on the remote 

or press FUNCTION on the unit repeatedly.

The function indicator flashes slowly in blue and “BT

AUDIO” appears in the display.

When the system is connecting with a Bluetooth

device, the Bluetooth device name that is set with the

Bluetooth device appears.

Press (Bluetooth) to cancel the connected 

Bluetooth device. “BT AUDIO” appears.

2 Press and hold SHIFT and CLEAR . 

“DELETE” flashes.

3 Press .

“COMPLETE” appears and all the pairing

information is erased.

Notes

If you erase the pairing information, you cannot make a Bluetooth

connection unless pairing is performed. In order to connect with

a Bluetooth device after performing this operation, you must enter

the passkey again.

If you erase the pairing information, the Bluetooth Standby mode

setting is set to off.

Playing music from a Bluetooth device

You can operate a Bluetooth device by connecting the

system and a Bluetooth device using AVRCP.

Check the following before playing music:

 The Bluetooth function of the Bluetooth device is enabled.

 Pairing has been completed.

1 Select the BLUETOOTH function.

Press BLUETOOTH FUNCTION on the remote 

or press FUNCTION on the unit repeatedly.

The function indicator flashes slowly in blue and “BT

AUDIO” appears in the display.

2 Establish connection with the Bluetooth device.

For details on operations of the Bluetooth device,

refer to the operation manual supplied with your

Bluetooth device.

Once the connection is established, “LINKED”

appears then the Bluetooth device name that is set

with the Bluetooth device appears.

If already connected with a Bluetooth device that has

been connected with this system in the past, you may

be connected automatically without operating the

Bluetooth device.

3 Start playback.

Press (or on the unit).   

Depending on the Bluetooth device, you may have to

press   twice.

Depending on the Bluetooth device, you may have

to start up the AV software of the Bluetooth device

beforehand.

4 Adjust the volume.

Press VOLUME +/ . 

Other operations

To Press

Pause playback   1) (or  1) on the

unit).

Stop playback   .

Select a folder +/ . 

Select a file   / .

Find a point in a file Hold down / (or   

  / on the unit).

1) Depending on the Bluetooth device, you may have to press  

( on the unit) twice. 

Note

These operations may not be available for certain Bluetooth devices.

In addition, the actual operations may differ depending on the

connected Bluetooth device.

To check the address of a connected Bluetooth

device

Press DISPLAY while the Bluetooth device name that 

is set with the Bluetooth device is displayed.

The Bluetooth device address appears in two

installments on the system display for 8 seconds.

To cancel the connection with a Bluetooth

device

Press (Bluetooth) on the unit until “UNLINKED”

appears.

Depending on the Bluetooth device, the connection with

the Bluetooth device may be cancelled automatically if

you stop playback.

Setting/Canceling Bluetooth Standby

mode

Bluetooth Standby mode can be entered when

the system goes into Wait mode for the Bluetooth

connection, even when the system is turned off.

You cannot set Bluetooth Standby mode if pairing has

been not completed or the pairing information is erased.

1 Select the BLUETOOTH function.

Press BLUETOOTH FUNCTION on the remote 

or press FUNCTION on the unit repeatedly.

The function indicator flashes in blue.

If already connected with Bluetooth device that

has been connected with this system in the past by

automatic connection, press (Bluetooth) to 

cancel the connected Bluetooth device. “BT AUDIO”

appears.

2 Press TOOL MENU .

“BT STBY” appears.

If the system has no pairing information, “NOT

USED” flashes.

3 Press .

“ON” or “OFF” appears.



4 Select “ON” or “OFF.”

Press / repeatedly.  

5 Turn off the system.

Press / .  

When it is set to on, you can listen to music from

the system that if it is turned on by operating the

Bluetooth connection on the Bluetooth device.

Note

If you erase the pairing information, Bluetooth Standby mode will

set to off.

Using optional audio components

1 Prepare the sound source.

Connect additional audio component to the AUDIO

IN jack  on the unit using an audio analog cord

(not supplied).

2 Turn down the volume.

Press VOLUME .

3 Select the AUDIO IN function.

Press AUDIO IN FUNCTION  on the remote or

press FUNCTION  on the unit repeatedly.

The function indicator lights in amber.

4 Start playback.

Start playback of the connected component and

adjust the volume.

Note

The system may enter Standby mode automatically if the volume

level of the connected component is too low. Adjust the component’s

volume accordingly. See “To turn off the Automatic Standby

function.”

Adjusting the sound

To Press

Adjust the volume VOLUME +/ .

Generate a more

dynamic sound

BASS BOOST .

Set the sound

effect

SOUND EFFECT repeatedly 

until desired sound effect is

displayed.

Changing the display

To Press

Change

information on

the display1)

DISPLAY  repeatedly when the

system is on.

Change Display

mode (see below.)

DISPLAY  repeatedly when the

system is off.2)

1) For example, you can view CD/MP3 disc information, such as:

CD-DA disc

 remaining playing time of a track during playback

 total remaining playing time

MP3 disc

 track or file name (“ ”)

 artist name (“ ”)

 album name (“ ”)

You can also view DAB/DAB+ station information such as the

service name, channel label, preset number, frequency, DLS

(Dynamic Label Segment), or ensemble label.

The STANDBY indicator



on the unit lights up when the system is

off.

The system offers the following display modes.

Display mode When the system is off1)

Power Saving

mode2)

The display is turned off to

conserve power. The timer and

clock continue to operate.

Clock3) The clock is displayed.

The STANDBY indicator



on the unit lights up when the system is

off.

2) You cannot set the clock in Power Saving mode.

3) The clock display automatically turns to Power Saving mode after 8

seconds.

Notes on the display information

Characters that cannot be displayed appear as “_.”

The following are not displayed:

 total playing time for an MP3 disc.

 total remaining playing time for an MP3 disc.

 remaining playing time for an MP3 file.

The following are not displayed correctly:

 elapsed playing time of an MP3 file encoded using VBR (variable

bit rate).

 folder and file names that do not follow either the ISO9660

Level 1, Level 2 or Joliet in the expansion format.

The following are displayed:

 total playing time for a CD-DA disc (except when PGM mode is

selected and the player is stopped).

 remaining playing time for a track of CD-DA disc.

 remaining playing time for a CD-DA disc (only when Normal

Play mode is selected during playback).

 ID3 tag information for MP3 files when ID3 version 1 and

version 2 tags are used (ID3 version 2 tag information display has

priority when both ID3 version 1 and version 2 tags are used for a

single MP3 file).

 up to 64 characters for an ID3 tag, where characters allowed are

uppercase letters (A to Z), numbers (0 to 9), and symbols (˝ $ % ’

( ) * + , – . / < = > @ [ \ ] _ ` { | } ! ? ^ ~).

Notes on the DAB/DAB+ display information

The following is also displayed;

 up to 8 characters of service name, up to 128 characters of DLS

(Dynamic Label Segment) and up to 16 characters of ensemble

label.

 a value between 0 and 100 indicating the signal quality is

displayed.

Using the timers

The system offers 2 timer functions. If you use both

timers, the Sleep Timer has priority.



Sleep Timer:

You can fall asleep to music. This function works even if

the clock is not set.

Press and hold SHIFT  and press SLEEP 

repeatedly.

With each press of SLEEP  with SHIFT  held

pressed, the setting time is decreased by 10 minutes,

from a maximum of 90 minutes to minimum of 10

minutes. To cancel the Sleep Timer, select “OFF.”

Play Timer:

You can wake up to CD, FM reception, DAB/DAB+

reception, or iPod/iPhone/iPad at a preset time. Make

sure you have set the clock.

1 Prepare the sound source.

Prepare the sound source, and then press VOLUME

+/  to adjust the volume.

To start from a specific CD track, audio file, and

radio station create your own program.

2 Select the timer set mode.

Press and hold SHIFT  and TIMER MENU .

3 Set the play timer.

Press /    repeatedly to select “PLAY SET,” then

press .

4 Set the time to start playback.

Press /    repeatedly to set the hour, then press

. Use the procedure above to set the minutes.

5 Use the same procedure as in step 4 to set the time

to stop playback.

6 Select the sound source.

Press /    repeatedly until the desired sound

source appears, then press .

7 Turn off the system.

Press . The system automatically turns on

before the preset time.

If the system is on at the preset time, the Play Timer

will not play. Do not operate the system from the

time the system turns on until the playback starts.

If the sound source is set to an FM station for a timer,

the system automatically turns on 15 seconds before

the preset time. If the sound source is set to CD, the

system automatically turns on 90 seconds before the

preset time. If the sound source is set to iPod/iPhone/

iPad, the system automatically turns on 30 seconds

before the preset time.

To check the setting

1 Press and hold SHIFT and TIMER MENU . 

2 Press  / repeatedly to select “SELECT,” and

then press .

3 Press  / repeatedly to select “PLAY SEL,” and

then press .

To cancel the timer

Repeat the same procedure as above until “OFF” appears

in step 3, and then press .

To change the setting

Start over from step 1.

Notes

When the sound source for a Play Timer is set to an FM station

tuned from a preset radio station, the radio station tuning for the

Play Timer is fixed at what you set for it. Even if you change the

radio station after setting the Play Timer, the radio station setting

for the Play Timer will not change.

When the sound source for a Play Timer is set to an FM station that

you set using auto tuning or manual tuning, if you change the radio

station after setting the Play Timer, the radio station setting for the

Play Timer also will be changed.

Notes for the iPod/iPhone/iPad user

Make sure the iPod/iPhone/iPad is not playing when using the Play

Timer.

The Play Timer may not be activated depending on the status of the

connected iPod/iPhone/iPad.

Tip

The Play Timer setting remains as long as the setting is not cancelled

manually.

Troubleshooting

1 Make sure the power cord is firmly connected.

2 Find your problem in the checklist below, and take

the indicated corrective action.

If the issue persists, contact your nearest Sony dealer.

If the STANDBY indicator flashes

Immediately unplug the power cord, and check the

following items.

Is anything blocking the ventilation holes of the

system?

Is the iPod/iPhone/iPad connector  short-

circuited?

After the STANDBY indicator  stops flashing,

reconnect the power cord, and turn on the system. If

the issue persists, contact your nearest Sony dealer.



General

The system does not turn on.

Is the power cord plugged in correctly?

The system has entered Standby mode

unexpectedly.

This is not a malfunction. The system enters Standby

mode automatically in about 30 minutes when there is

no operation or audio signal output. See “To turn off

the Automatic Standby function.”

The clock setting or the Play Timer operation

has been cancelled unexpectedly.

If about a minute elapses with no operation, the clock

setting or Play Timer setting is cancelled automatically.

Perform the operation again from the beginning.



 when an iPod/iPhone/iPad is connected.

 when a button on the remote or unit is pressed.

To turn off the beep sound

The system is set at the factory for the key-touch

confirmation beep to sound when you press a touch

panel key on the unit. You can turn off the beep sound.

1 Press the / to turn on the system.  

2 Press and hold and VOLUME – on the unit   

for 3 seconds or longer.

If you want to set the beep sound to on, use the same

procedure as in step 1, 2.

Note

Even if the beep sound is set to on, the system does not

beep to confirm key-touch while the Dock indicator

is flashing, although operation of the touch panel is

enabled even while the Dock indicator is flashing.

Messages

CAN’T PLAY : You have inserted a disc that cannot be

played back on this system.

COMPLETE : The preset operation ended normally.

ERROR : Unpredictable situations or an unknown device

is connected.

FULL : You tried to program more than 25 tracks or files

(steps).

LOCKED : The disc slot does not work. Contact your

nearest Sony dealer.

NO DISC : There is no disc in the player, or you have

loaded a disc that cannot be played.

NO PRESET (DAB/DAB+ only) : There is no stored

preset station.

NO SERV (DAB/DAB+ only) : There is no supported

DAB/DAB+ broadcast in your country or region.

NO STEP : All of the programmed tracks have been

erased.

NO SUPPORT : An unsupported iPod/iPhone/iPad is

connected or the iPod/iPhone/iPad whose battery is

empty is connected.

NO TEXT (DAB/DAB+ only) : There is no text

information in the received service.

NO TRACK : There are not playable files on the CD disc.

NOT USED : You tried to perform a specific operation

under conditions where that operation is prohibited.

PUSH STOP : You pressed PLAY MODE  during

playback in the CD function.

TIME NG : The Play Timer start and end times are set to

the same time.

Precautions

Discs that this system CAN play

Audio CD

CD-R/CD-RW (audio data/MP3 files)

Discs that this system CANNOT play

CD-ROM

CD-R/CD-RW other than those recorded in music CD

format or MP3 format conforming to ISO9660 Level

1/Level 2, Joliet

CD-R/CD-RW of poor recording quality,

CD-R/CD-RW that have scratches or are dirty,

or CD-R/CD-RW recorded with an incompatible

recording device

CD-R/CD-RW which is finalized incorrectly

Discs containing files other than MPEG 1 Audio

Layer-3 (MP3) files

Discs of non-standard shape (for example, heart,

square, star)

Discs that have adhesive tape, paper, or sticker

attached to them

Rental or used discs with attached seals where the glue

extends beyond the seal

Discs that have labels printed using ink that feels tacky

when touched

Notes on discs

Before playing, wipe the disc with a cleaning cloth

from the center out to the edge.

Do not clean discs with solvents, such as benzine,

thinner, or commercially available cleaners or anti-

static spray intended for vinyl LPs.

Do not expose discs to direct sunlight or heat sources

such as hot air ducts, nor leave it in a car parked in

direct sunlight.

On safety

Completely disconnect the power cord (mains lead)

from the wall outlet (mains) if it is not going to be used

for an extended period of time. When unplugging the

system, always grip the plug. Never pull the cord itself.

Should any solid object or liquid get into the system,

unplug the system, and have it checked by qualified

personnel before operating it again.

The AC power cord can be changed only by a qualified

service facility.

On placement

Do not place the system in an inclined position or in

locations that are extremely hot, cold, dusty, dirty, or

humid or lacking adequate ventilation, or subject to

vibration, direct sunlight or a bright light.

Be careful when placing the system on surfaces that

have been specially treated (for example, with wax, oil,

polish) as staining or discoloration of the surface may

result.

If the system is brought directly from a cold to a warm

location or is placed in a very damp room, moisture

may condense on the lens inside the CD player, and

cause the system to malfunction. In this situation,

remove the disc, and leave the system turned on for

about an hour until the moisture evaporates.



There is no sound.

Press VOLUME + to turn up the volume.

Make sure the headphone is not connected to the 

(phones) jack .

Make sure additional audio components are connected

correctly.

Make sure the function is set to AUDIO IN.

Is anything blocking the ventilation holes of the

system?

The specified station may have temporarily stopped

broadcast.

Severe hum or noise.

Move the system away from sources of noise.

Connect the system to a different wall outlet.

Install a noise filter (not supplied) to the power cord.

The remote does not function.

Remove any obstacles between the remote and the

remote sensor  on the unit, and position the unit

away from fluorescent lights.

Point the remote at the system’s sensor .

Move the remote closer to the system.

The STANDBY indicator  remains lit after

unplugging the power cord.

The STANDBY indicator  may not turn off

immediately after unplugging the power cord. The

indicator will turn off after about 40 seconds. This is

not a malfunction.

CD/MP3 disc

The system does not eject the disc and

“LOCKED” appears.

Consult your nearest Sony dealer or local authorized

Sony service facility.

The disc cannot be inserted.

Check that the system is turned on.

Do not insert a disc into the disc slot until “NO DISC”

appears in the display.

a disc that has not been finalized (a disc to which data

can be added).

The sound skips, or the disc will not play.

Wipe the disc clean, and replace it.

Move the system to a location away from vibration (for

example, on top of a stable stand).

Play does not start from the first track.

Return to normal play by pressing PLAY MODE 

repeatedly until both “PGM” and “SHUF” disappear.

Starting playback takes more time than usual.

The following discs can increase the time it takes to

start playback:

 a disc recorded with a complicated tree structure.

 a disc that has many folders.

Erroneous display.

The data stored in the CD-DA, MP3 disc may have

been corrupted, perform the transferring again.

The character code that can be displayed by this

system are as follows:

 Upper cases (A to Z).

 Numbers (0 to 9).

 Symbols (< > * +, [ ] \ _).

Other characters appear as “_.”

iPod/iPhone/iPad

There is no sound.

Make sure the iPod/iPhone/iPad is connected securely.

Make sure the iPod/iPhone/iPad is playing music.

Make sure the iPod/iPhone/iPad is updated with the

latest software. If not, update the iPod/iPhone/iPad

before using with the system.

Adjust the volume.

The sound is distorted.

Make sure the iPod/iPhone/iPad is connected securely.

Turn down the volume.

Set the “EQ” setting of the iPod/iPhone/iPad to “Off ”

or “Flat.”

The iPod/iPhone/iPad does not function.

Shut down any other iOS applications running on the

iPod/iPhone/iPad. For details, refer to the operation

manual supplied with the iPod/iPhone/iPad.

Make sure the iPod/iPhone/iPad is connected securely.

Make sure the iPod/iPhone/iPad is updated with the

latest software. If not, update the iPod/iPhone/iPad

before using with the system.

Because the operation of the system and the iPod/

iPhone/iPad are different, you may not operate the

iPod/iPhone/iPad using buttons on the remote or unit.

In this case, use the control buttons on the iPod/

iPhone/iPad.

The iPod/iPhone/iPad cannot be charged.

Make sure the iPod/iPhone/iPad is connected securely.

If you press DISPLAY while charging when the 

system is off, the system stops charging an iPod/

iPhone/iPad. To restart charging of an iPod/iPhone/

iPad, reconnect the iPod/iPhone/iPad when the display

mode is Power Saving mode.

The ring volume of the iPhone does not

change.

Adjust the ring volume on the iPhone.

Bluetooth device

Pairing cannot be done.

Move the Bluetooth device closer to the system.

Pairing may not be possible if other Bluetooth devices

are present around the system. In this case, turn off the

other Bluetooth devices.



Enter the same passkey that was entered at the

Bluetooth device correctly.

Connection is not possible.

The Bluetooth device you attempted to connect

does not support the A2DP profile, and cannot be

connected with the system.

Enable the Bluetooth function of the Bluetooth device.

Establish a connection from the Bluetooth device.

The pairing registration information has been erased.

Perform the pairing operation again.

While connected to a Bluetooth device, this system

cannot be detected and a connection cannot be

established from another Bluetooth device.

Erase the pairing registration information of a

Bluetooth device and perform the pairing operation

again.

The sound skips or fluctuates, or the

connection is lost.

The system and the Bluetooth device are too far apart.

If there are obstacles between the system and your

Bluetooth device, remove or avoid the obstacles.

If there is equipment that generates electromagnetic

radiation, such as a wireless LAN, other Bluetooth

device, or a microwave oven nearby, move them away.

The sound of your Bluetooth device cannot be

heard on this system.

Turn up the volume on your Bluetooth device first,

and then adjust the volume using VOLUME +/ . 

Severe hum or noise

If there are obstacles between the system and your

Bluetooth device, remove or avoid the obstacles.

If there is equipment that generates electromagnetic

radiation, such as a wireless LAN, other Bluetooth

device, or a microwave oven nearby, move them away.

Turn down the volume of the connected Bluetooth

device.

Tuner

Severe hum or noise, or stations cannot be

received. (“TUNED” or “STEREO” flashes on the

display.)

Connect the antenna properly.

Find a location and an orientation that provide good

reception, and then set up the antenna again.

Keep the antennas away from the power cord to avoid

picking up noise.

Turn off nearby electrical equipment.

Several radio stations can be heard at the

same time.

Find a location and an orientation that provide good

reception, and then set up the antenna again.

Bundle the antenna cables using commercially

available cord clips, for example, and adjust the cable

lengths.

DAB/DAB+ radio station is not received

properly.

Check all antenna connections, then perform the DAB

Automatic Scan procedure (see “Reception of DAB/

DAB+ radio station”).

The current DAB/DAB+ service may not be available.

Press +/  to select a different service.

If you have moved to another area, some services/

frequencies may have changed and you may not be

able to tune into your usual broadcast. Perform the

DAB Automatic Scan procedure to re-register the

contents of broadcasts. (Performing this procedure

clears all previously stored presets.)

The DAB/DAB+ broadcast of has been

interrupted.

Check the location of the system or adjust the

orientation of the antenna to increase the indicated

value of the signal quality. Refer to “Changing the

display” for further details on the signal quality.

To reset the system to factory settings

If the system still does not operate properly, reset the

system to factory settings.

Use buttons on the unit to reset the system to its factory

default settings.

1 Disconnect and reconnect the power cord, and

then turn on the system.

2 Press and hold  and /    on the unit until

“RESET” appears in the display.

All user-configured settings, such as preset radio

stations, timer, and the clock, are deleted.

To turn off the Automatic Standby

function

This system is equipped with an Automatic Standby

function. With this function, the system enters Standby

mode automatically in about 30 minutes when there is

no operation or audio signal output.

By default, the Automatic Standby function is turned on.

Use buttons on the unit to turn off the Automatic

Standby function.

Hold down   while the system is on, until

“AUTO. STBY OFF” appears.

To turn on the function, repeat the procedure until

“AUTO. STBY ON” appears.

Notes

“AUTO. STBY” appears in the display for 2 minutes before the

system enters Standby mode.

The Automatic Standby function is invalid for the tuner function

(DAB/FM), even when you have enabled it.

The system may not enter Standby mode automatically in the

following cases:

 while an audio signal is being detected.

 during playback of audio tracks or files.

 while the preset Sleep Timer or Play Timer is in process.

The system counts down the time again until it enters Standby

mode, even when Automatic Standby function is enabled in the

following cases:



On heat buildup

Heat buildup on the unit during operation is normal

and is not cause for alarm.

Do not touch the cabinet if it has been used

continuously at a high volume because the cabinet may

have become hot.

Do not obstruct the ventilation holes.

On the speaker system

This speaker system is not magnetically shielded, and

the picture on nearby TV sets may become magnetically

distorted. In this situation, turn off the TV, wait 15 to

30 minutes, and turn it back on.

Cleaning the cabinet

Clean this system with a soft cloth slightly moistened

with a mild detergent solution. Do not use any type of

abrasive pads, scouring powder, or solvents, such as

thinner, benzine, or alcohol.

Bluetooth wireless technology

Bluetooth wireless technology is a short-range wireless

technology linking digital devices, such as personal

computers and digital still cameras. Using the Bluetooth

wireless technology, you can operate the units involved

within a range of about 10 meters.

The Bluetooth wireless technology is commonly

used between two devices, but a single device can be

connected to multiple devices.

You do not need wires to get connected as you do with

a USB connection, and you do not need to place the

devices face to face as you do with wireless infrared

technology. You can use the technology with one

Bluetooth device in your bag or pocket.

Bluetooth wireless technology is a global standard

supported by thousands of companies. These companies

produce products that meet the global standard.

Supported Bluetooth version and profiles

Profile refers to a standard set of capabilities for various

Bluetooth product capabilities. This system supports the

following Bluetooth version and profiles.

Supported Bluetooth version:

Bluetooth Standard version 2.0

Supported Bluetooth profiles:

A2DP (Advanced Audio Distribution Profile)

AVRCP (Audio Video Remote Control Profile)

Effective communication range

Bluetooth devices should be used within approximately

10 meters (unobstructed distance) of each other. The

effective communication range may become shorter

under the following conditions.

 When a person, metal object, wall or other

obstruction is between the devices with a Bluetooth

connection

 Locations where a wireless LAN is installed

 Around microwave ovens that are in use

 Locations where other electromagnetic waves occur

Effects of other devices

Bluetooth devices and wireless LAN (IEEE 802.11b/g)

use the same frequency band (2.4 GHz). When using

your Bluetooth device near a device with wireless LAN

capability, electromagnetic interference may occur.

This could result in lower data transfer rates, noise, or

inability to connect. If this happens, try the following

remedies:

 Try connecting this system and Bluetooth mobile

phone or Bluetooth device when you are at least 10

meters away from the wireless LAN equipment.

 Turn off the power to the wireless LAN equipment

when using your Bluetooth device within 10 meters

Effects on other devices

The radio waves broadcast by this system may interfere

with the operation of some medical devices. Since this

interference may result in malfunction, always turn off

the power on this system, Bluetooth mobile phone and

Bluetooth device in the following locations:

 In hospitals, on trains, in airplanes, at gas stations,

and any place where flammable gasses may be

present

 Near automatic doors or fire alarms

Notes

This system supports security functions that comply with the

Bluetooth specification as a means of ensuring security during

communication using Bluetooth technology. However, this security

may be insufficient depending on the setting contents and other

factors, so always be careful when performing communication

using Bluetooth technology.

Sony cannot be held liable in any way for damages or other loss

resulting from information leaks during communication using

Bluetooth technology.

Bluetooth communication is not necessarily guaranteed with all

Bluetooth devices that have the same profile as this system.

Bluetooth devices connected with this system must comply with

the Bluetooth specification prescribed by the Bluetooth SIG, Inc.,

and must be certified to comply. However, even when a device

complies with the Bluetooth specification, there may be cases where

the characteristics or specifications of the Bluetooth device make it

impossible to connect, or may result in different control methods,

display or operation.

Noise may occur or the audio may cut off depending on the

Bluetooth device connected with this system, the communications

environment, or surrounding conditions.



Specifications

Amplifier section

Power output (rated): 16 watts + 16 watts (8 ohms at 1 kHz, 1% THD)

Continuous RMS power output (reference): 20 watts + 20 watts (8 ohms at

1 kHz, 10% THD)

Input

AUDIO IN (stereo mini jack): Sensitivity 700 mV, impedance 47 kilohms

Outputs

PHONES (stereo mini jack): Accepts headphones of 8 ohms or more

CD player section

System: Compact disc and digital audio system

Laser Diode Properties

Emission Duration: Continuous

Laser Output*: Less than 44.6 µW

* This output is the value measurement at a distance of 200 mm from the

objective lens surface on the Optical Pick-up Block with 7 mm aperture.

Frequency response: 20 Hz 20 kHz

Signal-to-noise ratio: More than 90 dB

Dynamic range: More than 90 dB

Tuner section

FM stereo, FM superheterodyne tuner

Antenna: FM lead antenna

Tuning range:

87.5 MHz 108.0 MHz (50 kHz step)

DAB/DAB+ tuner section:

FM stereo, DAB/FM superheterodyne tuner

Frequency range*

Band-III: 174.928 (5A) MHz  239.200 (13F) MHz

* For details, see “DAB/DAB+ frequency table” below.

Antenna: DAB/FM lead antenna

The DAB/DAB+ services are available only in countries/regions that

support DAB/DAB+ services.

DAB/DAB+ frequency table (Band-III)

Frequency Label Frequency Label

174.928 MHz 5A 209.936 MHz 10A

176.640 MHz 5B 211.648 MHz 10B

178.352 MHz 5C 213.360 MHz 10C

180.064 MHz 5D 215.072 MHz 10D

181.936 MHz 6A 216.928 MHz 11A

183.648 MHz 6B 218.640 MHz 11B

185.360 MHz 6C 220.352 MHz 11C

187.072 MHz 6D 222.064 MHz 11D

188.928 MHz 7A 223.936 MHz 12A

190.640 MHz 7B 225.648 MHz 12B

192.352 MHz 7C 227.360 MHz 12C

194.064 MHz 7D 229.072 MHz 12D

195.936 MHz 8A 230.784 MHz 13A

197.648 MHz 8B 232.496 MHz 13B

199.360 MHz 8C 234.208 MHz 13C

201.072 MHz 8D 235.776 MHz 13D

202.928 MHz 9A 237.488 MHz 13E

204.640 MHz 9B 239.200 MHz 13F

206.352 MHz 9C

208.064 MHz 9D

* Frequencies are displayed to two decimal places on this system.

iPod/iPhone/iPad section

Compatible iPod/iPhone/iPad models:

 iPod touch 4th generation

 iPod touch 3rd generation

 iPod touch 2nd generation

 iPod nano 6th generation

 iPod nano 5th generation (video camera)

 iPod nano 4th generation (video)

 iPod nano 3rd generation (video)

 iPod classic 160 GB (2009)



iPhone 4S



iPhone 4



iPhone 3GS



iPhone 3G



iPad2



iPad

“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an

electronic accessory has been designed to connect specifically to iPod, iPhone,

or iPad, respectively, and has been certified by the developer to meet Apple

performance standards. Apple is not responsible for the operation of this

device or its compliance with safety and regulatory standards. Please note

that the use of this accessory with iPod, iPhone, or iPad may affect wireless

performance.

Bluetooth section

Communication system:

Bluetooth Standard version 2.1+EDR (Enhanced Data Rate)

Output:

Bluetooth Standard Power Class 2

Maximum communication range:

Line of sight approx. 10 m

Frequency band:

2.4 GHz band (2.4000 GHz - 2.4835 GHz)

Modulation method:

FHSS

Compatible Bluetooth profiles

*2:

A2DP (Advanced Audio Distribution Profile)

AVRCP 1.3 (Audio Video Remote Control Profile)

Supported codecs:

Receive: SBC (Sub Band Codec)

Transmit: SBC (Sub Band Codec)

1) The actual range will vary depending on factors such as obstacles between

devices, magnetic fields around a microwave oven, static electricity,

reception sensitivity, antenna’s performance, operating system, software

application, etc.

2) Bluetooth standard profiles indicate the purpose of Bluetooth

communication between devices.

Speaker section

Full-range speaker: 65 mm, cone type

Passive radiator: 67 mm × 108 mm

Rated impedance: 8 ohms

General

Power requirements:

AC adapter

Input: 100 V 240 V AC, 50/60 Hz

Output: DC 19.5 V 3.9A

Power consumption: 32 watts

Dimensions (W/H/D):

Approx. 449 mm × 212 mm × 137 (95) mm (incl. protruding parts)

Mass: Approx. 2.8 kg

Quantity of the main unit: 1 piece

Supplied accessories: Remote Commander (1), AC adapter (1),

Power cord (1), DAB/FM lead antenna (1), Protective cushion (2),

R6 (Size AA) batteries (2)

Design and specifications are subject to change without notice.

Standby power consumption: 0.5 W

Product specificaties

Merk:	Sony
Categorie:	Hifi systeem
Model:	CMT-V75BTiP

Heb je hulp nodig?

Als je hulp nodig hebt met Sony CMT-V75BTiP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Hifi systeem Sony

Sony HCD-451 Handleiding

24 Mei 2024

Sony DHC-MD373 Handleiding

15 April 2024

Sony HST-211 Handleiding

7 Maart 2024

Sony SHAKE-99 Handleiding

17 Februari 2024

Sony SHAKE-55 Handleiding

17 Februari 2024

Sony SHAKE-X3D Handleiding

17 Februari 2024

Sony SHAKE-77 Handleiding

17 Februari 2024

Sony MHC-GNZ8D Handleiding

6 Juli 2023

Sony XM-8ES Handleiding

6 Juli 2023

Sony NW-ZX707 Handleiding

29 Juni 2023

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

Lenoxx CD813 Handleiding

16 November 2024

Denon CEOL N-8 Handleiding

16 November 2024

Fiio M7K Handleiding

16 November 2024

Fiio X1II Handleiding

16 November 2024

Fiio M3 Handleiding

16 November 2024

Fiio X3 Mark III Handleiding

16 November 2024

Pro-Ject BT Box E HD Handleiding

15 November 2024

Blaupunkt RCD 204 Handleiding

15 November 2024

Samsung MM-X7 Handleiding

15 November 2024

Auna VCP-191 Handleiding

14 November 2024