Sony CMT-BX77DBi Handleiding

Sony Hifi systeem CMT-BX77DBi

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony CMT-BX77DBi (3 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

WARNING

To reduce the risk of re, do not cover the ventilation

opening of the apparatus with newspapers, tablecloths,

curtains, etc. Do not place the naked ame sources such as

lighted candles on the apparatus.

To reduce the risk of re or electric shock, do not expose

this apparatus to dripping or splashing, and do not place

objects lled with liquids, such as vases, on the apparatus.

Do not install the appliance in a conned space, such as a

bookcase or built-in cabinet.

As the main plug is used to disconnect the unit from the

mains, connect the unit to an easily accessible AC outlet.

Should you notice an abnormality in the unit, disconnect

the main plug from the AC outlet immediately.

Do not expose batteries or apparatus with battery-installed

to excessive heat such as sunshine, re or the like.

Excessive sound pressure from earphones and headphones

can cause hearing loss.

Hooking up the system securely

CAUTION

e use of optical instruments with this product will

increase eye hazard.

is appliance is classied

as a CLASS 1 LASER

product. is marking

is located on the rear

exterior.

Notice for customers: the following

information is only applicable

to equipment sold in countries

applying EU directives.

e manufacturer of this product is Sony Corporation,

1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. e

Authorized Representative for EMC and product safety is

Sony Deutschland GmbH, Hedelnger Strasse 61, 70327

Stuttgart, Germany. For any service or guarantee matters,

please refer to the addresses given in separate service or

guarantee documents.

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

is symbol on the product or on its packaging indicates

that this product shall not be treated as household

waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and

electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. e recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please

contact your local Civic Oce, your household waste

disposal service or the shop where you purchased the

product.

Applicable accessories: Remote commander

Disposal of waste batteries

(applicable in the European

Union and other European

countries with separate

collection systems)

is symbol on the battery or on the packaging indicates

that the battery provided with this product shall not be

treated as household waste. On certain batteries this

symbol might be used in combination with a chemical

symbol. e chemical symbols for mercury (Hg) or lead

(Pb) are added if the battery contains more than 0.0005%

mercury or 0.004% lead.

By ensuring these batteries are disposed of correctly,

you will help prevent potentially negative consequences

for the environment and human health which could

otherwise be caused by inappropriate waste handling of

the battery. e recycling of the materials will help to

conserve natural resources.

In case of products that for safety, performance or data

integrity reasons require a permanent connection with an

incorporated battery, this battery should be replaced by

qualied service sta only. To ensure that the battery will

be treated properly, hand over the product at end-of-life

to the applicable collection point for the recycling of

electrical and electronic equipment.

For all other batteries, please view the section on how

to remove the battery from the product safely. Hand the

battery over to the applicable collection point for the

recycling of waste batteries.

For more detailed information about recycling of this

product or battery, please contact your local Civic Oce,

your household waste disposal service or the shop where

you purchased the product.

Note on DualDiscs

A DualDisc is a two sided disc product which mates

DVD recorded material on one side with digital

audio material on the other side. However, since the

audio material side does not conform to the Compact

Disc (CD) standard, playback on this product is not

guaranteed.

Music discs encoded with copyright

protection technologies

is product is designed to playback discs that conform

to the Compact Disc (CD) standard. Recently, various

music discs encoded with copyright protection

technologies are marketed by some record companies.

Please be aware that among those discs, there are some

that do not conform to the CD standard and may not be

playable by this product.

License and Trademark Notice

 iPod is a trademark of Apple Inc., registered in the U.S.

and other countries.

 “Made for iPod” means that an electronic accessory

has been designed to connect specically to iPod and

has been certied by the developer to meet Apple

performance standards.

 Apple is not responsible for the operation of this device

or its compliance with safety and regulatory standards.

 MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and omson.

 All other trademarks and registered trademarks are of

their respective holders. In this manual, TM and marks ®

are not specied.

Basic Operations

is manual mainly explains operations using the

remote, but the same operations can also be performed

using the buttons on the unit having the same or similar

names.

Before using the system

To use the remote

Slide and remove the battery compartment lid , and

insert the two supplied R6 (size AA) batteries, side 

rst, matching the polarities shown below.

Notes on using the remote

 With normal use, the batteries should last for about six months.

 Do not mix an old battery with a new one or mix dierent types of

batteries.

 If you do not use the remote for a long period of time, remove the

batteries to avoid damage from battery leakage and corrosion.

To set the clock

Use buttons on the remote to set the clock.

1 Turn on the system.

Press (power)  .

2 Select the clock set mode.

Press TIMER MENU . If the current mode appears

on the display, press /  repeatedly to select

“CLOCK SET?” and then press (enter) .

3 Set the time.

Press /  repeatedly to set the hour, and then

press (enter) . Use the same procedure to set the

minutes.

e clock settings are lost when you disconnect the

power cord or if a power failure occurs.

To display the clock when the system is o, press

DISPLAY . e clock is displayed for about

8 seconds.

To run the DAB Automatic Scan

When you turn on the system for the rst time aer

you purchase the system, DAB Automatic Scan starts

automatically and creates a list of available services.

If you want to run the DAB Automatic Scan again,

perform the procedure below.

1 Press DAB AUTO SCAN  on the unit.

“Auto Scan?” and “Push Enter” appear.

2 Press (enter) .

Scanning begins. “ ” appears. Depending on 

the DAB services available in your area, scanning may

take a few minutes.

When scanning is complete, a list of available services

is created.

Notes

 If your country or region does not support DAB broadcast, “No

Service” appears.

 Do not press any button on the unit or the remote during DAB

Automatic Scan. If scanning is interrupted, run the DAB Automatic

Scan again.

 If you move to another area, repeat this procedure to store the

stations for your new area.

 is procedure clears all previously stored presets.

 Before unplugging the DAB antenna, make sure the system is turned

o to preserve your own DAB settings.

 is tuner does not support data services.

To use the iPod

Insert an iPod Dock Adapter into the unit’s connector 

before use.

To remove the iPod Dock Adapter, pull it up with your

ngernail or a at object using the slot inside the adapter.

Slot

Note

e iPod Dock Adapter is not supplied with the system. Use the

adapter supplied with your iPod when using an iPod model. For

details on the iPod Dock Adapters, refer to the instructions supplied

with the iPod Dock Adapters.

Adjusting the sound

To adjust the volume

Press VOLUME +/ (or VOL +/ on the unit)   .

To add a sound eect

To Press

Generate a more dynamic

sound (Dynamic Sound

Generator X-tra)

DSGX  on the unit.

Set the sound eect EQ  repeatedly to select

“BASS” or “TREBLE,” and

then press +/  repeatedly

to adjust the level.

Playing a CD/MP3 disc

1 Select the CD function.

Press FUNCTION +/ (or FUNCTION on the unit) 

 repeatedly.

2 Place a disc.

Press (open/close)  on the unit, and place a disc

with the label side up on the disc tray.

To close the disc tray, press (open/close)  on the

unit.

Do not force the disc tray closed with your nger, as

this may damage the unit.

3 Start playback.

Press (play) (or CD (play/pause) on the  

unit) .

To Press

Pause playback   (pause) (or CD (play/

pause) on the unit) .

To resume play, press the button

again.

Stop playback  (stop) (or /CANCEL on the 

unit) .

Select a folder on an

MP3 disc

+/ (select folder) .

Select a track or le / (go back/go forward)

.

Find a point in a

track or le

Hold down / (rewind/

fast forward)  during playback,

and release the button at the

desired point.

Select Repeat Play REPEAT  repeatedly until

“REP” or “REP1” appears.

To change the play mode

Press PLAY MODE  repeatedly while

the player is

stopped. You can select normal play (“ ”

for all MP3

les in the folder on the disc), shue play (“SHUF” or

“ SHUF*”), or program play (“PGM”).

* When playing a CD-DA disc, (SHUF) Play performs the same

operation as normal (shue) play.

Notes on Repeat Play

 All tracks or les on a disc are played repeatedly up to ve times.

 “REP1” indicates that a single track or le is repeated until you stop

it.

Notes on playing MP3 discs

 Do not save other types of tracks or les or unnecessary folders on a

disc that has MP3 les.

 Folders that have no MP3 les are skipped.

 MP3 les are played back in the order that they are recorded onto

the disc.

 e system can only play MP3 les that have a le extension of

“.MP3”.

 If there are les on the disc that have the “.MP3” le extension,

but that are not MP3 les, the unit may produce noise or may

malfunction.

 e maximum number of:

 folders is 255 (including the root folder).

 MP3 les is 511.



MP3 les and folders that can be contained on a single disc is 512.

 folder levels (the tree structure of les) is 8.

 Compatibility with all MP3 encoding/writing soware, recording

device, and recording media cannot be guaranteed. Incompatible MP3

discs may produce noise or interrupted audio or may not play at all.

Notes on playing multisession discs

 If the disc begins with a CD-DA (or MP3) session, it is recognized as

a CD-DA (or MP3) disc, and other sessions are not played back.

 A disc with a mixed CD format is recognized as a CD-DA (audio)

disc.

Listening to the radio

Before you can receive DAB, you must complete the

DAB Automatic Scan procedure (see “Before using the

system”).

1 Select “TUNER DAB,” “TUNER FM” or “TUNER AM.”

Press FUNCTION +/ (or FUNCTION on the unit) 

 repeatedly. You can also select DAB directly by

pressing DAB AUTO SCAN  on the unit.

2 Select the tuning mode.

Press TUNING MODE  repeatedly until “AUTO”

appears.

3 Tune in the desired station.

Press +/ (or TUNE +/ on the unit)   . Scanning

stops automatically when a station is tuned in, and

then “TUNED” and “STEREO” (for stereo programs

only) appear.

When you tune in a DAB station or an FM station that

provides RDS services, the service name or station

name appears on the display.

To stop automatic scanning (FM/AM bands

only)

Press (stop) (or /CANCEL on the unit)   .

To tune in a station with a weak signal (FM/AM

bands only)

If “TUNED” does not appear and the scanning does not

stop, press TUNING MODE  repeatedly until “AUTO”

and “PRESET” disappear, and then press +/ (or TUNE 

+/ on the unit)  repeatedly to tune in the desired

station.

To reduce static noise on a weak FM stereo

station

Press FM MODE  repeatedly until “MONO” appears

to turn o stereo reception.

Notes on listening to DAB stations

 When tuning in a DAB station, it may take a few seconds before you

hear any sound.

 Primary service is automatically received when secondary service

ends.

Playing the iPod

1 Select the iPod function.

Press FUNCTION +/ (or FUNCTION on the unit) 

 repeatedly.

2 Place the iPod.

3 Start playback.

Press (play) (or iPod (play/pause) on the  

unit) .

To control the iPod

You can control your iPod with the following buttons on

the remote or unit.

To Press

Pause playback  (pause) (or iPod 

(play/pause) on the unit)  or 

(stop) .

Scroll up/down the

iPod menus

/ . You can scroll up or

down the iPod menus much like

the Click Wheel operations of

the iPod or the drag up-or-down

operations of the iPod touch.

Select a track

or chapter of

audiobook/podcast

/ (go back/go forward)

. To fast-forward or fast-

rewind, hold down the button.

Antennas

Find a location and an orientation that provide good reception, and then

set up the antenna.

Keep the antennas away from the speaker cords and the power cord to

avoid picking up noise.

With a DAB external antenna (not supplied), you can obtain higher

DAB broadcast sound quality. We recommend that you use the supplied

FM/DAB lead antenna only temporarily until you install a DAB external

antenna.

Before unplugging the DAB antenna, make sure the system is turned o to

preserve your own DAB settings.

FM/DAB lead antenna

(Extend it horizontally.)

AM loop antenna

Power

Connect the power cord to a wall socket.

If the plug does not t the wall socket,

detach the supplied plug adaptor (only for

models equipped with an adaptor).

Wall socket

Speakers

Make sure the metal leads (not the part

covered with vinyl insulation) are securely

inserted into the speaker jacks.

Right speaker

Red

Black

White side for North

American model

When carrying this system

1 Remove a disc to protect the CD mechanism.

2 Press FUNCTION (or FUNCTION on the unit) +/

 repeatedly to select the CD function.

3 Hold down VOL +  and DSGX  on the unit,

and press   on the unit until “STANDBY”

appears.

4 After “LOCK” appears, unplug the power cord.

Brown side for other regions

To Press

Choose the selected

item

 / (enter) (or ENTER on

the unit) . You can choose the

selected item much like the center

button on the iPod or the touch

operation of the iPod touch.

Find a point in a

track or chapter of

audiobook/podcast

/ (fast rewind/fast

forward)  during playback, and

release the button at the desired

point.

Return to the

previous menu or

select a menu

 /TOOL MENU / 

(return) . You can return to the

previous menu or select a menu

much like the Menu button on

the iPod or the touch operation

of the iPod touch.

To use the system as a battery charger

You can use the system as a battery charger for the iPod

when the system is both on and o.

e charging begins when the iPod is placed on the unit’s

connector . e charging status appears in the iPod

display. For details, see the user’s guide of your iPod.

To stop charging the iPod

Remove the iPod. If you stop charging the iPod when

the system is o, press DISPLAY  until the clock

disappears in the display.

Notes

 When placing or removing the iPod, handle the iPod in the same

angle as that of the iPod connector

 on the unit and do not twist

or sway the iPod to prevent connector damage.

 Do not carry the unit with an iPod set on the connector. Doing so

may cause a malfunction.

 When placing or removing the iPod, brace the unit with one hand

and take care not to press the controls of the iPod by mistake.

 Before disconnecting the iPod, pause playback.

 While playing video, you cannot use

/ . You can fast

rewind (fast forward) by holding down

/ .

 To change the volume level, use VOLUME +/ (or VOL +/ on the  

unit) . e volume level does not change even if adjusted on the

iPod.

 is system is designed for iPod only. You cannot connect any other

portable audio players.

 To use an iPod, refer to the user’s guide of your iPod.

 Sony cannot accept responsibility in the event that data recorded to

iPod is lost or damaged when using an iPod with this unit.

Changing the display

To Press

Change

information on the

display1)

DISPLAY  repeatedly when the

system is on.

Check the clock

when the system

is o2)

DISPLAY  when the system

is o3). e clock is displayed for

8 seconds.

1) For example, you can view CD/MP3 disc information, such as;

 track or le number during normal play.

 track or le name (“ ”) during normal play.

 artist name (“ ”) during normal play.

 album or folder name (“ ”) during normal play.

 total playing time while the player is stopped.

You can also view DAB station information such as the service

name, channel label, preset number, frequency, DLS (Dynamic Label

Segment), or ensemble label.

e clock is displayed continuously while the iPod is being charged.

To turn o the clock display, press DISPLAY

 (See “To stop

charging the iPod”).

3) e STANDBY indicator  on the unit lights up when the system is

o.

Notes on the display information

 Characters that cannot be displayed appear as “_”.

 e following are not displayed:

 total playing time for a CD-DA disc depending on the play mode.

 total playing time and remaining playing time for an MP3 disc.

 e following are not displayed correctly:

 folder and le names that do not follow either ISO9660 Level 1,

Level 2 or Joliet in the expansion format.

 e following is displayed:

 ID3 tag information for MP3 les when ID3 version 1 and version

2 tags are used (up to 62 characters).

 up to 8 characters of service name, up to 128 characters of DLS

(Dynamic Label Segment) and up to 16 characters of ensemble

label.

Using optional audio components

To connect an optional headphones

Connect headphones to the PHONES jack  on the

unit.

To connect an optional component

Connect additional audio component to the AUDIO

IN jack  on the unit using an audio analog cord (not

supplied). Turn down the volume on the system, and

then select the AUDIO IN function.

FM/DAB lead antenna

(Extend it horizontally.)

75-ohm coaxial cable with F male

type connector (not supplied)

To DAB external

antenna (not supplied)

Black

Red

Black

Red

Other Operations

Creating your own program

(Program Play)

1 Press FUNCTION +/ (or FUNCTION on the unit) 

repeatedly to select the CD function.

2 Press PLAY MODE  repeatedly until “PGM” appears

while the player is stopped.

3 Press /    repeatedly until the desired

track or le number appears.

When programming les, press +/  repeatedly

to select the desired folder, and then select the desired

le.

Total playing time of program

(including selected track

or le)

Selected track or le

number

4 Press (or ENTER on the unit)  to add the track

or le to the program.

“ . ” appears when the total program time    

exceeds 100 minutes for a CD, or when you select a

CD track whose number is 21 or over, or when you

select an MP3 le.

5 Repeat steps 3 through 4 to program additional

tracks or les, up to a total of 25 tracks or les.

6 To play your program of tracks or les, press (or 

CD on the unit)  .

e program remains available until you open the disc

tray. To play the same program again, press (or 

CD on the unit)  .

To cancel Program Play

Press PLAY MODE  repeatedly until “PGM”

disappears while the player is stopped.

To delete the last track or le of the program

Press CLEAR  while the player is stopped.

Presetting radio stations

You can preset your favorite radio stations and tune

them in instantly by selecting the corresponding preset

number.

Use buttons on the remote to preset stations.

1 Tune in the desired station (See Listening to the “

radio ).”

2 Press TUNER MEMORY .

Preset number

3 Press +/  repeatedly to select your desired

preset number.

If another station is already assigned to the selected

preset number, the station is replaced by the new

station.

4 Press .

5 Repeat steps 1 through 4 to store other stations.

You can preset up to 20 DAB, 20 FM and 10 AM

stations. e preset stations are retained for about half

a day even if you disconnect the power cord or if a

power failure occurs.

6 To call up a preset radio station, press TUNING

MODE  repeatedly until “PRESET” appears, and

then press +/  repeatedly to select the desired

preset number.

Note on presetting DAB stations

You can preset a DAB service only when it can be received.

Using the Timers

e system oers two timer functions. If you use the Play

Timer with the Sleep Timer, the Sleep Timer has priority.

Use buttons on the remote to use the timer functions.

Sleep Timer:

You can fall asleep to music. is function works even if

the clock is not set.

Press SLEEP  repeatedly. If you select “AUTO,” the

system automatically turns o aer the current disc stops

or in 100 minutes.

Play Timer:

You can wake up to CD, tuner or iPod at a preset time.

Make sure you have set the clock.

1 Prepare the sound source.

Prepare the sound source, and then press VOLUME

+/  to adjust the volume.

To start from a specic track or le, create your own

program.

2 Press TIMER MENU .

3 Press /

  repeatedly to select “PLAY SET?,” and

then press .

“ON” appears, and the hour indication ashes.

4 Set the time to start playback.

Press /

  repeatedly to set the hour, and then

press .

e minute indication ashes. Use the procedure

above to set the minutes.

5 Use the same procedure as in step 4 to set the time

to stop playback.

6 Select the sound source.

Press /  repeatedly until the desired sound

source appears, and then press . e display

shows the timer settings.

7 Press  to turn o the system.

e system turns on 15 seconds before the preset time.

If the system is on at the preset time, the Play Timer

will not play.

To activate or check the timer again

1 Press TIMER MENU .

“TIMER SEL?” ashes in the display.

2 Press .

3 Press /  repeatedly to select “PLAY SEL?,” then

press .

To cancel the timer

Repeat the same procedure as above until “TIMER

OFF?” appears in step 3, and then press .

To change the setting

Start over from step 1.

Notes for the iPod user

 Make sure the iPod is not playing when using the Play Timer.

 The Play Timer may not be activated depending on the status of the

connected iPod.

Tip

e Play Timer setting remains as long as the setting is not canceled

manually.

1 Make sure the power cord and speaker cords are

correctly and rmly connected.

2 Find your problem in the checklist below, and take

the indicated corrective action.

If the issue persists, contact your nearest Sony dealer.

If the STANDBY indicator ashes

Immediately unplug the power cord, and check the

following items.

 If your system has a voltage selector, is the voltage

selector set to the correct voltage?

 Are you using only the supplied speakers?

 Is anything blocking the ventilation holes on the top

or back of the system?

 Is the iPod connector  short-circuited?

Aer the STANDBY indicator  stops ashing,

reconnect the power cord, and turn on the system. If

the issue persists, contact your nearest Sony dealer.

General

Sound comes from one channel, or the left and

right volumes are unbalanced.

 Place the speakers as symmetrically as possible.

 Connect only the supplied speakers.

Severe hum or noise.

 Move the system away from sources of noise.

 Connect the system to a dierent wall socket.

 Install a noise lter (available separately) to the power

cord.

The remote does not function.

 Remove any obstacles between the remote and the

remote sensor  on the unit, and position the unit

away from uorescent lights.

 Point the remote at the system’s sensor.

 Move the remote closer to the system.

CD/MP3 player

The sound skips, or the disc will not play.

 Wipe the disc clean, and replace it.

 Move the system to a location away from vibration (for

example, on top of a stable stand).

 Move the speakers away from the system, or place them

on separate stands. At high volume, speaker vibration

may cause the sound to skip.

Play does not start from the rst track.

 Press PLAY MODE  repeatedly until both “PGM”

and “SHUF” disappear to return to normal play.

Starting playback takes more time than usual.



e following discs take a longer time to start playback.

 a disc recorded with a complicated tree structure.

 a disc recorded in multisession mode.

 a disc that has not been nalized (a disc to which data

can be added).

 a disc that has many folders.

Tuner

Severe hum or noise, or stations cannot be

received. (“TUNED” or “STEREO” ashes on the

display.)

 Connect the antenna properly.

 Find a location and an orientation that provide good

reception, and then set up the antenna again.

 Keep the antenna away from the speaker cords and the

power cord to avoid picking up noise.

 Connect a commercially available external antenna.

 Consult your nearest Sony dealer if the supplied AM

antenna has come o the plastic stand.

 Turn o nearby electrical equipment.

“TUNED” does not appear in the display (DAB

only).

 Check all antenna connections, then perform the

DAB Automatic Scan procedure (see “Before using the

system”).

 e current DAB service may not be available. Press

+/ (or TUNE +/ on the unit)    to select a dierent

service.

 If you have moved to another area, some services/

frequencies may have changed and you may not be able

to tune into your usual broadcast.

Perform the DAB Automatic Scan procedure to

re-register the contents of broadcasts. (Performing this

procedure clears all previously stored presets.)

To change the AM tuning interval

e AM tuning interval is factory-preset to 9 kHz (or

10 kHz, for some areas).

Use buttons on the unit to change the AM tuning

interval.

1 Tune in any AM station, and then turn o the

system.

2 While holding down ENTER , press  .

All the AM preset stations are erased. To reset the

interval to the factory preset, repeat the procedure.

Troubleshooting To improve tuner reception

Turn o CD player power by using the CD power

management function. By default, CD power is turned on.

1 Press FUNCTION +/ (or FUNCTION on the unit) 

repeatedly to select the CD function, and then turn

o the system.

2 After “STANDBY” stops ashing, press   on the

unit while holding down CANCEL   on the unit.

“CD POWER OFF” appears. With CD player power

turned o, disc access time is increased. To turn on

CD player power, repeat the procedure until “CD

POWER ON” appears.

To reset the system to factory settings

If the system still does not operate properly, reset the

system to factory settings.

Use buttons on the unit to reset the unit to its factory

default settings.

1 Disconnect and reconnect the power cord, and then

turn on the system.

2 Press  , VOL +  and CANCEL   at the

same time.

All user-congured settings, such as preset radio

stations, timer, and the clock, are deleted.

iPod

There is no sound.

 Make sure the iPod is connected securely.

 Make sure the iPod is playing music.

 Adjust the volume.

The sound is distorted.

 Make sure the iPod is connected securely.

 Turn down the volume.

 Set the “EQ” setting of the iPod to “O” or “Flat.”

The iPod does not function.

 Make sure the iPod is connected securely.

 Make sure the iPod is updated with the latest soware.

If not, update the iPod before using with the system.

 Because operation of the system and the iPod are

dierent, you may not operate the iPod using buttons

on the remote or unit. In this case, use control buttons

on the iPod.

 Remove the iPod, then reconnect it.

The iPod cannot be charged.

 Make sure the iPod is connected securely.

Messages

CD Over: You have reached the end of the disc while

pressing  during playback or pause.

Complete!: e preset operation ended normally.

LOCKED: e disc tray does not open. Contact your

nearest Sony dealer.

No Disc: ere is no disc in the system, or you have

loaded a disc that cannot be played.

No Step: All of the programmed tracks or les have been

erased.

No Preset (DAB only): ere is no stored preset station.

No Service (DAB only): ere is no supported DAB

broadcast in your country or region.

Push STOP!: You pressed PLAY MODE  during

playback.

Reading: e system is reading information of the disc.

Some buttons are not available.

Step Full!: You tried to program more than 26 tracks or

les (steps).

TIME NG!: e Play Timer start and end times are set to

the same time.

Precautions

Discs that this system CAN play

 Audio CD

 CD-R/CD-RW (audio data/MP3 les)

Discs that this system CANNOT play

 CD-ROM

 CD-R/CD-RW other than those recorded in music CD

format or MP3 format conforming to ISO9660 Level

1/Level 2, Joliet

 CD-R/CD-RW recorded in multisession that have not

ended by “closing the session”

 CD-R/CD-RW of poor recording quality, CD-R/CD-

RW that have scratches or are dirty, or CD-R/CD-RW

recorded with an incompatible recording device

 CD-R/CD-RW which is nalized incorrectly

 Discs containing les other than MPEG 1 Audio Layer-

3 (MP3) les

 Discs of non-standard shape (for example, heart,

square, star)

 Discs that have adhesive tape, paper, or sticker attached

to them

 Rental or used discs with attached seals where the glue

extends beyond the seal

 Discs that have labels printed using ink that feels tacky

when touched

Notes on discs

 Before playing, wipe the disc with a cleaning cloth from

the center out to the edge.

 Do not clean discs with solvents, such as benzine,

thinner, or commercially available cleaners or anti-

static spray intended for vinyl LPs.

 Do not expose discs to direct sunlight or heat sources

such as hot air ducts, nor leave it in a car parked in

direct sunlight.

On safety

 Completely disconnect the power cord (mains lead)

from the wall socket (mains) if it is not going to be used

for an extended period of time. When unplugging the

unit, always grip the plug. Never pull the cord itself.

 Should any solid object or liquid get into the system,

unplug the system, and have it checked by qualied

personnel before operating it again.

 e AC power cord can be changed only by a qualied

service facility.

On placement

 Do not place the system in an inclined position or in

locations that are extremely hot, cold, dusty, dirty, or

humid or lacking adequate ventilation, or subject to

vibration, direct sunlight or a bright light.

 Be careful when placing the unit or speakers on

surfaces that have been specially treated (for example,

with wax, oil, polish) as staining or discoloration of the

surface may result.

 If the system is brought directly from a cold to a warm

location or is placed in a very damp room, moisture

may condense on the lens inside the CD player, and

cause the system to malfunction. In this situation,

remove the disc, and leave the system turned on for

about an hour until the moisture evaporates.

On heat buildup

 Heat buildup on the unit during operation is normal

and is not cause for alarm.

 Do not touch the cabinet if it has been used

continuously at a high volume because the cabinet may

have become hot.

 Do not obstruct the ventilation holes.

On the speaker system

is speaker system is not magnetically shielded, and

the picture on nearby TV sets may become magnetically

distorted. In this situation, turn o the TV, wait 15 to

30 minutes, and turn it back on.

If there is no improvement, move the speakers far away

from the TV.

Cleaning the cabinet

Clean this system with a so cloth slightly moistened

with a mild detergent solution. Do not use any type

of abrasive pad, scouring powder, or solvent, such as

thinner, benzine, or alcohol.

Specications

Main unit

Amplier section

DIN power output (rated):

18 watts + 18 watts (6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference): 25 watts + 25 watts (6 ohms at

1 kHz, 10% THD)

Music power output (reference): 38 watts + 38 watts (6 ohms at 1 kHz, 10%

THD)

Inputs

AUDIO IN (stereo mini jack): voltage 250 mV, impedance 47 kilohms

Outputs

PHONES (stereo mini jack): accepts headphones of 8 ohms or more

SPEAKER: accepts impedance of 6 to 16 ohms

CD player section

System: Compact disc and digital audio system

Laser Diode Properties

Emission Duration: Continuous

Laser Output*: Less than 44.6 µW

* is output is the value measurement at a distance of 200 mm from the

objective lens surface on the Optical Pick-up Block with 7 mm aperture.

Frequency response: 20 Hz 20 kHz

Signal-to-noise ratio: More than 90 dB

Dynamic range: More than 90 dB

Tuner section

DAB tuner section:

Frequency range*

Band-III: 174.928 (5A) MHz 239.200 (13F) MHz

* For details, see “DAB frequency table” below.

Antenna: FM/DAB lead antenna

Antenna terminal: 75 ohms, F female

FM stereo, FM/AM superheterodyne tuner

FM tuner section:

Tuning range: 87.5 MHz  108.0 MHz (50 kHz step)

Antenna: FM/DAB lead antenna

Antenna terminals: 75 ohms unbalanced

Intermediate frequency: 10.7 MHz

AM tuner section:

Tuning range: 531 kHz  1,602 kHz (9 kHz step)

Antenna: AM loop antenna, external antenna terminal

Intermediate frequency: 450 kHz

DAB frequency table (Band-III)

Frequency Label Frequency Label

174.928 MHz 5A 209.936 MHz 10A

176.640 MHz 5B 211.648 MHz 10B

178.352 MHz 5C 213.360 MHz 10C

180.064 MHz 5D 215.072 MHz 10D

181.936 MHz 6A 216.928 MHz 11A

183.648 MHz 6B 218.640 MHz 11B

185.360 MHz 6C 220.352 MHz 11C

187.072 MHz 6D 222.064 MHz 11D

188.928 MHz 7A 223.936 MHz 12A

190.640 MHz 7B 225.648 MHz 12B

192.352 MHz 7C 227.360 MHz 12C

194.064 MHz 7D 229.072 MHz 12D

195.936 MHz 8A 230.784 MHz 13A

197.648 MHz 8B 232.496 MHz 13B

199.360 MHz 8C 234.208 MHz 13C

201.072 MHz 8D 235.776 MHz 13D

202.928 MHz 9A 237.488 MHz 13E

204.640 MHz 9B 239.200 MHz 13F

206.352 MHz 9C

208.064 MHz 9D

iPod section

Compatible iPod models :*

* Update your iPod to use the latest soware before you use it.

iPod nano

5th generation

(video camera) iPod touch

2nd generation/

iPod touch

Late 2009

iPod classic

120 GB

160 GB (2009)

iPod nano

4th generation

(video)

iPod classic

160 GB (2007) iPod touch

1st generation

iPod nano

3rd generation

(video) iPod classic

80 GB

iPod nano

2nd generation

(aluminum)

iPod

5th generation

(video)

iPod nano

1st generation iPod

4th generation

(color display)

iPod

4th generation

iPod mini

Speaker

Speaker system: 2-way, bass-reex type

Speaker units

Woofer: 100 mm dia., cone type

Tweeter: 40 mm dia., cone type

Rated impedance: 6 ohms

Dimensions (w/h/d): Approx. 140 mm × 240 mm × 200 mm

Mass: Approx. 2.0 kg

General

Power requirements: 230 V AC, 50/60 Hz

Power consumption: 63 watts

Dimensions (w/h/d) (excl. speakers): Approx. 215 mm × 140 mm × 298 mm

Mass (excl. speakers): Approx. 3.9 kg

Supplied accessories: Remote Commander (1)/R6 (Size AA) batteries (2)/AM

loop antenna (1)/FM/DAB lead antenna (2)/Speaker cords (2)

Design and specications are subject to change without notice.

 Standby power consumption: 0.5 W

 Halogenated ame retardants are not used in the certain printed

wiring boards.

Product specificaties

Merk:	Sony
Categorie:	Hifi systeem
Model:	CMT-BX77DBi

Heb je hulp nodig?

Als je hulp nodig hebt met Sony CMT-BX77DBi stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Hifi systeem Sony

Sony CMT-Z100DiR Handleiding

22 November 2024

Sony CMT-BX77DBi Handleiding

22 November 2024

Sony HCD-451 Handleiding

24 Mei 2024

Sony DHC-MD373 Handleiding

15 April 2024

Sony HST-211 Handleiding

7 Maart 2024

Sony SHAKE-99 Handleiding

17 Februari 2024

Sony SHAKE-55 Handleiding

17 Februari 2024

Sony SHAKE-X3D Handleiding

17 Februari 2024

Sony SHAKE-77 Handleiding

17 Februari 2024

Sony MHC-GNZ8D Handleiding

6 Juli 2023

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

LG LX-220 Handleiding

23 November 2024

Smart-AVI HDS-4PS Handleiding

20 November 2024

Accsoon CineView Quad Handleiding

19 November 2024

Accsoon CineView SE Handleiding

19 November 2024

Accsoon CineView HE Handleiding

19 November 2024

Ruark Audio R410 Handleiding

19 November 2024

OSD Audio Nero Stream WRA Handleiding

18 November 2024

Esoteric HR Audio Player Handleiding

17 November 2024

Lenoxx CD813 Handleiding

16 November 2024

Denon CEOL N-8 Handleiding

16 November 2024