Sony CMT-FX350i Handleiding

Sony Audio en video CMT-FX350i

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony CMT-FX350i (4 pagina's) in de categorie Audio en video. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

WARNING

To reduce the risk of re, do not cover the ventilation

opening of the apparatus with newspapers, tablecloths,

curtains, etc. Do not place the naked ame sources such

as lighted candles on the apparatus.

To reduce the risk of re or electric shock, do not expose

this apparatus to dripping or splashing, and do not place

objects lled with liquids, such as vases, on the apparatus.

Do not install the appliance in a conned space, such as a

bookcase or built-in cabinet.

As the main plug is used to disconnect the unit from the

mains, connect the unit to an easily accessible AC outlet.

Should you notice an abnormality in the unit, disconnect

the main plug from the AC outlet immediately.

Do not expose batteries or apparatus with battery-

installed to excessive heat such as sunshine, re or the

like.

e unit is not disconnected from the mains as long as it

is connected to the AC outlet, even if the unit itself has

been turned o.

Excessive sound pressure from earphones and

headphones can cause hearing loss.

CAUTION

e use of optical instruments with this product will

increase eye hazard.

is appliance is classied

as a CLASS 1 LASER

product. is marking

is located on the rear

exterior.

Notice for customers: the following

information is only applicable to

equipment sold in countries applying EU

directives.

e manufacturer of this product is Sony Corporation,

1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. e

Authorized Representative for EMC and product safety is

Sony Deutschland GmbH, Hedelnger Strasse 61, 70327

Stuttgart, Germany. For any service or guarantee matters,

please refer to the addresses given in separate service or

guarantee documents.

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

is symbol on the product or on its packaging indicates

that this product shall not be treated as household

waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and

electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. e recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please

contact your local Civic Oce, your household waste

disposal service or the shop where you purchased the

product.

Applicable accessories: Remote commander

Disposal of waste batteries

(applicable in the European

Union and other European

countries with separate

collection systems)

is symbol on the battery or on the packaging indicates

that the battery provided with this product shall not be

treated as household waste.

On certain batteries this symbol might be used in

combination with a chemical symbol. e chemical

symbols for mercury (Hg) or lead (Pb) are added if the

battery contains more than 0.0005% mercury or 0.004%

lead.

By ensuring these batteries are disposed of correctly,

you will help prevent potentially negative consequences

for the environment and human health which could

otherwise be caused by inappropriate waste handling of

the battery. e recycling of the materials will help to

conserve natural resources.

In case of products that for safety, performance or data

integrity reasons require a permanent connection with an

incorporated battery, this battery should be replaced by

qualied service sta only. To ensure that the battery will

be treated properly, hand over the product at end-of-life

to the applicable collection point for the recycling of

electrical and electronic equipment.

For all other batteries, please view the section on how

to remove the battery from the product safely. Hand the

battery over to the applicable collection point for the

recycling of waste batteries.

For more detailed information about recycling of this

product or battery, please contact your local Civic Oce,

your household waste disposal service or the shop where

you purchased the product.

Note on DualDiscs

A DualDisc is a two sided disc product which mates

DVD recorded material on one side with digital

audio material on the other side. However, since the

audio material side does not conform to the Compact

Disc (CD) standard, playback on this product is not

guaranteed.

Music discs encoded with copyright

protection technologies

is product is designed to playback discs that conform

to the Compact Disc (CD) standard. Recently, various

music discs encoded with copyright protection

technologies are marketed by some record companies.

Please be aware that among those discs, there are some

that do not conform to the CD standard and may not be

playable by this product.

License and Trademark Notice

iPod is a trademark of Apple Inc., registered in the U.S.

and other countries.

“Made for iPod” means that an electronic accessory

has been designed to connect specically to iPod and

has been certied by the developer to meet Apple

performance standards.

Apple is not responsible for the operation of this device

or its compliance with safety and regulatory standards.

MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and omson.

All other trademarks and registered trademarks are of

their respective holders. In this manual, TM and ® marks

are not specied.

Operations

Playing the iPod

1 Select the iPod function.

Press FUNCTION +/  repeatedly.

2 Place the iPod.

3 Start playback.

Press .

To control the iPod

To Press

Pause playback  / .

Scroll up/down

the iPod menus

/ .

Select a track

or chapter of

audiobook/

podcast

/ . To fast-forward or

fast-rewind, hold down the button.

Choose the

selected item

 / .

Find a point in a

track or chapter

of audiobook/

podcast

Hold down /  during

playback, and release the button at

the desired point.

Return to the

previous menu or

select a menu

 /TOOL MENU /RETURN

 (return) .

To use the system as a battery charger

You can use the system as a battery charger for the iPod

when the system is on.

e charging begins when the iPod is placed on the iPod

connector. e charge status appears in the iPod display.

For details, see the user’s guide of your iPod.

To stop charging the iPod

Remove the iPod. Turning o the system also stops

charging the iPod.

Notes

 When placing or removing the iPod, handle the iPod in the same

angle as that of the iPod connector on the unit and do not twist or

sway the iPod to prevent connector damage.

 Do not carry the unit with an iPod set on the connector. Doing so

may cause a malfunction.

 When placing or removing the iPod, brace the unit with one hand

and take care not to press the controls of the iPod by mistake.

 Before disconnecting the iPod, pause playback.

 Hold down /  to fast-forward (fast-rewind) while

playing video if

 /  does not function.

 To change the volume level, use VOLUME +/ . e volume level

does not change even if adjusted on the iPod.

 e iPod Dock  on the unit is designed for iPod only. You cannot

connect any other portable audio players.

 To use an iPod, refer to the user’s guide of your iPod.

 Sony cannot accept responsibility in the event that data recorded to

iPod is lost or damaged when using an iPod with this unit.

Creating your own program

(Program Play)

1 Select the CD function.

Press FUNCTION +/  repeatedly.

2 Select the play mode.

Press PLAY MODE  repeatedly until “PGM”

appears while the player is stopped.

3 Select the desired track or le number.

Press /  repeatedly until the desired

track or le number appears.

When programming MP3 les, press +/ 

repeatedly to select the desired folder, and then select

the desired le.

Selected track or le number Total playing time of the selected

track or le

4 Program the selected track or le.

Press  to enter the selected track or le.

5 Repeat steps 3 through 4 to program additional

tracks or les, up to a total of 25 tracks or les.

6 To play your program of tracks or les, press .

e program remains available until you open the CD

compartment. To play the same program again, press

 .

To cancel Program Play

Press PLAY MODE  repeatedly until “PGM”

disappears while the player is stopped.

To delete the last track or le of the program

Press CLEAR  while the player is stopped.

To view program information, such as total

track number of the program

Press DISPLAY  repeatedly.

Getting Started

Unit

Remote

is manual mainly explains operations using the

remote, but the same operations can also be performed

using the buttons on the unit having the same or similar

names.

To use the remote

Slide and remove the battery compartment lid, and insert

the two R6 (size AA) batteries (not supplied), side 

rst, matching the polarities shown below.

Notes on using the remote

 With normal use, the batteries should last for about six months.

 Do not mix an old battery with a new one or mix dierent types of

batteries.

 If you do not use the remote for a long period of time, remove the

batteries to avoid damage from battery leakage and corrosion.

When carrying this system

1 Remove a disc to protect the CD mechanism.

2 Press (power)   on the unit to turn o the

system and conrm that “STANDBY” stops ashing.

3 Unplug the power cord.

To set the clock

1 Press   to turn on the system.

2 Press TIMER MENU  to select the clock set mode.

If “PLAY SET” ashes, press /    repeatedly to

select “CLOCK,” and then press (enter) .

3 Press /    repeatedly to set the hour, then press

.

4 Use the same procedure to set the minutes.

Note

e clock settings are lost when you disconnect the power cord or if a

power failure occurs.

To display the clock when the system is o

Press DISPLAY . e clock is displayed for about

8 seconds.

 Antennas

Find a location and an orientation that provide good

reception, and then set up the antenna.

Keep the antennas away from the speaker cords and the

power cord to avoid picking up noise.

Before unplugging the DAB/FM antenna, make sure the

system is turned o to preserve your own DAB and FM

settings.

 Speakers

Insert only the stripped portion of the cord.

 Power

Connect the power cord to a wall outlet.

If the plug does not t the wall outlet, detach the supplied

plug adaptor (only for models equipped with an adaptor).

To use the iPod

Insert an iPod Dock Adapter into the iPod Dock 

before use.

iPod Dock Adapter

iPod Connector

To remove the iPod Dock Adapter, pull it up with your

ngernail or a at object using the slot inside the adapter.

Note

e iPod Dock Adapter is not supplied with the system. Use the

adapter supplied with your iPod when using an iPod model. For

details on the iPod Dock Adapters, refer to the instructions supplied

with the iPod Dock Adapters.

Listening to the radio

1 Select “DAB” or “TUNER FM.”

Press FUNCTION +/  repeatedly.

2 Perform tuning.

For automatic scanning

Press TUNING MODE  repeatedly until “AUTO”

appears, and then press + / . Scanning stops

automatically when a station is tuned in, and “ST” (for

stereo programs only) lights up in the display.

If the scanning for an FM station does not stop, press

  to stop scanning, then perform manual tuning

(below).

When you tune in a DAB station or an FM station that

provides RDS services (European model only), the

service name or station name appears on the display.

For manual tuning (FM band only)

Press TUNING MODE  repeatedly until

“MANUAL” appears, and then press + / 

repeatedly to tune in the desired station.

Notes on DAB stations

 When tuning in a DAB station, it may take a few seconds before you

hear any sound.

 Primary service is automatically received when secondary service

ends.

 is tuner does not support data services.

Tip

To reduce static noise on a weak FM stereo station, press FM MODE

 repeatedly until “MONO” appears to turn o stereo reception.

Running the DAB Automatic Scan manually

1 Press DAB INITIAL SCAN on the unit to start the 

DAB Automatic Scan.

“DAB SCAN” and “PUSH ENTER” appear.

2 Press  to perform scanning.

Scanning begins. e scanning progress is indicated

by advancing asterisks ( ). Depending on the 

DAB services available in your area, scanning may

take a few minutes.

When scanning is complete, a list of available services

is created.

Notes

 If your country or region does not support DAB broadcast,

“NO SERV” appears.

 is procedure clears all previously stored presets.

 Before unplugging the DAB/FM antenna, make sure the system is

turned o to preserve your own DAB settings.

Presetting radio stations

1 Tune in the desired station.

2 Press TUNER MEMORY  to select the tuner

memory mode.

3 Press + /  repeatedly to select the desired

preset number.

If another station is already assigned to the selected

preset number, the station is replaced by the new

station.

4 Press  to store the station.

5 Repeat steps 1 through 4 to store other stations.

You can preset up to 20 DAB and 20 FM stations. e

preset stations are retained for about half a day even

if you disconnect the power cord or if a power failure

occurs.

6 To call up a preset radio station, press TUNING

MODE  repeatedly until “PRESET” appears, and

then press + /  repeatedly to select the

desired preset number.

Note on presetting DAB stations

You can preset a DAB service only when it can be received.

Playing a CD/MP3 disc

1 Select the CD function.

Press FUNCTION +/  repeatedly.

2 Place a disc.

Press PUSH OPEN/CLOSE  on the unit,

and place a disc with the label side up on the CD

compartment.

To close the CD compartment, press PUSH OPEN/

CLOSE  on the unit.

3 Start playback.

Press (play) .

Other operations

To Press

Pause playback  (pause) . To resume play, press

the button again.

Stop playback  (stop) .

Select a folder on

an MP3 disc (select folder) +/ 

repeatedly.

Select a track or

le

 (go back) / (go 

forward) .

Find a point in a

track or le

Hold down (rewind) / 

(fast forward)  during playback,

and release the button at the desired

point.

Select Repeat Play REPEAT  repeatedly until “REP”

or “REP1” appears.

To change the play mode

Press PLAY MODE  repeatedly while the player is

stopped. You can select normal play (“ ” for all MP3

les in the folder on the disc), shue play (“SHUF”

or “ SHUF*” for folder shue), or program play

(“PGM”).

* When playing a CD-DA (audio) disc, (SHUF) Play performs the

same operation as normal (SHUF) Play.

Note on Repeat Play

“REP1” indicates that a single track or le is repeated until you stop

playback.

Note on shue play mode

When you turn o the system, the selected shue play mode (“SHUF”

or “ SHUF”) is cleared and the play mode returns to normal play

mode (“ ”).

Notes on playing MP3 discs

 Do not save other types of tracks or les, or unnecessary folders on a

disc that has MP3 les.

 Folders that have no MP3 les are skipped.

 MP3 les are played back in the order that they are recorded onto

the disc.

 e system can only play MP3 les that have a le extension of

“.mp3”.

 Even when le name has the “.mp3” le extension, if the actual

le diers, playing this le may generate a loud noise which could

damage the speaker system and the system may malfunction.

 e maximum number of:

 folders is 255 (including the root folder).

 MP3 les is 512.

 folder levels (the tree structure of les) is 8.

 Compatibility with all MP3 encoding/writing soware, recording

device, and recording media cannot be guaranteed. Incompatible

MP3 discs may produce noise or interrupted audio or may not play

at all.

Notes on playing multisession discs

 If the rst session on the disc is a CD-DA session, the other sessions

on the disc cannot be recognized regardless of the session format;

only CD-DA tracks in the rst session can be played back.

 If the session format for the rst session is CD-ROM and the

following sessions are recorded in the same format, the system will

continue to play back MP3 les accordingly in multiple sessions

until the system encounters another session recorded in a dierent

format.

 DAB/FM lead antenna (Extend it horizontally.)

 To right speaker

 To wall outlet

To connect an optional headphones

Connect headphones to the PHONES jack  on the

unit.

Reception of DAB radio station

When you turn on the system for the rst time aer

you purchase the system, DAB Automatic Scan starts

automatically and creates a list of available services.

During the DAB Automatic Scan, “ ” appears. Do 

not press any button on the unit or the remote during

DAB Automatic Scan. Scanning is interrupted and

service list may not be created properly.

To run the DAB Automatic Scan manually, perform

the procedure of “Running the DAB Automatic Scan

manually” in “Listening to the radio.” If you have moved

to another area, perform the DAB Automatic Scan

manually and re-register the contents of broadcasts.

 Speaker cord (Red/ )

 Speaker cord (Black/ )

 To left speaker

Using optional audio components

1 Prepare the sound source.

Connect additional audio component to the AUDIO

IN jack  on the unit using an audio analog cord

(not supplied).

2 Turn down the volume.

Press VOLUME .

3 Select the AUDIO IN function.

Press FUNCTION +/  repeatedly.

4 Start playback.

Start playback of the connected component and adjust

the volume.

Note

e system may enter standby mode automatically if the volume

level of the connected component is too low. Adjust the component’s

volume accordingly. See “To turn o the automatic standby function.”

Adjusting the sound

To Press

Adjust the volume VOLUME +/ .

Generate a more

dynamic sound

(Dynamic Sound

Generator X-tra)

DSGX  on the unit.

Set the sound

eect

EQ .

Changing the display

To Press

Change

information on

the display*

DISPLAY  repeatedly when the

system is on.

Check the clock

when the system

is o

DISPLAY  when the system is o.

e clock is displayed for 8 seconds.

* For example, you can view CD/MP3 disc information, such as;

 track or le number during normal play.

 track or le name (“ ”) during normal play.

 artist name (“ ”) during normal play.

 album or folder name (“ ”) during normal play.

 total playing time and total number of tracks on the CD-DA

disc (only when normal play mode is selected and the player is

stopped).

 total number of folders (albums) on the MP3 disc (only when

normal play mode is selected and the player is stopped).

 volume label if it exists on the MP3 disc.

You can also view DAB station information such as the service

name, channel label, preset number, DLS (Dynamic Label Segment),

or ensemble label.

Notes on the display information

 Characters that cannot be displayed appear as “_”.

 e following are not displayed;

 total playing time for an MP3 disc.

 remaining playing time for an MP3 le.

 e following are not displayed correctly;

 elapsed playing time of an MP3 le encoded using VBR (variable

bit rate).

 folder and le names that do not follow either the ISO9660

Level 1, Level 2 or Joliet in the expansion format.

 e following are displayed;

 remaining playing time for a track.

 ID3 tag information for MP3 les when ID3 version 1 and

version 2 tags are used (ID3 version 2 tag information display has

priority when both ID3 version 1 and version 2 tags are used for a

single MP3 le).

 up to 32 characters of ID3 tag information using uppercase letters

(A to Z), numbers (0 to 9), and symbols (˝ $ % ’ ( ) * + , – . / < = >

@ [ \ ] _ ` { | } ! ? ^ ~).

 up to 8 characters of service name, up to 128 characters of DLS

(Dynamic Label Segment) and up to 16 characters of ensemble

label using uppercase letters (A to Z), numbers (0 to 9), and

symbols (˝ $ % ’ ( ) * + , – . / < = > @ [ \ ] _ ` { | } ! ? ^ ~).

Using the timers

e system oers two timer functions. If you use both

timers, the Sleep Timer has priority.

Sleep Timer:

You can fall asleep to music. is function works even if

the clock is not set.

Press SLEEP  repeatedly. If you select “AUTO,” the

system automatically turns o aer the current disc stops,

or within 100 minutes.

Play Timer:

You can wake up to CD, DAB/FM reception or iPod at a

preset time.

Make sure you have set the clock.

1 Prepare the sound source.

Prepare the sound source, and then press VOLUME

+/  to adjust the volume.

To start from a specic CD track or audio le, create

your own program.

2 Select the timer set mode.

Press TIMER MENU .

3 Set the play timer.

Press /    repeatedly to select “PLAY SET,” then

press .

4 Set the time to start playback.

Press /    repeatedly to set the time, then press

.

5 Use the same procedure as in step 4 to set the time

to stop playback.

6 Select the sound source.

Press /    repeatedly until the desired sound

source appears, then press .

7 Turn o the system.

Press . e system turns on 15 seconds before

the preset time.

If the system is on at the preset time, the Play Timer

will not play. Do not operate the system from the time

the system turns on until the playback starts.

To check the setting

1 Press TIMER MENU .

2 Press /

  repeatedly to select “SELECT,” and then

press .

3 Press /

  repeatedly to select “PLAY SEL,” and

then press .

To cancel the timer

Repeat the same procedure as above until “OFF” appears

in step 3, and then press .

To change the setting

Start over from step 1.

Notes for the iPod user

Make sure the iPod is not playing when using the Play Timer.

e Play Timer may not be activated depending on the status of the

connected iPod.

Tip

e Play Timer setting remains as long as the setting is not cancelled

manually.

Troubleshooting

1 Make sure the power cord and speaker cords are

correctly and rmly connected.

2 Find your problem in the checklist below, and take

the indicated corrective action.

If the issue persists, contact your nearest Sony dealer.

If “PROTECT” appears on the display

Immediately unplug the power cord, and check the

following items aer “PROTECT” disappears.

 Are the + and speaker cords short-circuited?

 Is anything blocking the ventilation holes of the

system?

 Is the iPod connector  short-circuited?

Aer you have checked these above items and found

to be all right, reconnect the power cord, and turn on

the system. If the issue persists, contact your nearest

Sony dealer.

General

The system does not turn on.

 Is the power cord plugged in?

The system has entered standby mode

unexpectedly.

 is is not a malfunction. e system enters standby

mode automatically in about 30 minutes when there is

no operation or audio signal output. See “To turn o

the automatic standby function.”

The clock setting or the Play Timer operation

has been cancelled unexpectedly.

 If about a minute elapses with no operation, the clock

setting or Play Timer setting is cancelled automatically.

Perform the operation again from the beginning.

There is no sound.

 Are the + and speaker cords short-circuited?

 Are you using only the supplied speakers?

 Is anything blocking the ventilation holes of the system?

 e specied station may have temporarily stopped

broadcast.

Sound comes from one channel, or the left and

right volumes are unbalanced.

 Place the speakers as symmetrically as possible.

 Connect only the supplied speakers.

Severe hum or noise.

 Move the system away from sources of noise.

 Connect the system to a dierent wall outlet.

 Install a noise lter (available separately) to the power

cord.

The remote does not function.

 Remove any obstacles between the remote and the

remote sensor  on the unit, and position the unit

away from uorescent lights.

 Point the remote at the system’s sensor.

 Move the remote closer to the system.

CD/MP3 player

The sound skips, or the disc will not play.

 Wipe the disc clean, and replace it.

 Move the system to a location away from vibration (for

example, on top of a stable stand).

 Move the speakers away from the system, or place them

on separate stands. At high volume, speaker vibration

may cause the sound to skip.

Play does not start from the rst track.

 Return to Normal Play by pressing PLAY MODE 

repeatedly until both “PGM” and “SHUF” disappear.

Starting playback takes more time than usual.

 e following discs can increase the time it takes to

start playback;

 a disc recorded with a complicated tree structure.

 a disc recorded in multisession mode.

 a disc that has not been nalized (a disc to which data

can be added).

 a disc that has many folders.

Messages

FULL : You tried to program more than 25 tracks or les

(steps).

NO DISC : ere is no disc in the player, or you have

loaded a disc that cannot be played.

NoPRESET (DAB only) : ere is no stored preset

station.

NO SERV (DAB only) : ere is no supported DAB

broadcast in your country or region.

NO STEP : All of the programmed tracks have been

erased.

No TEXT (DAB only) : ere is no text information in

the received service.

NOT USED : You tried to perform a specic operation

under conditions where that operation is prohibited.

OVER : You have reached the end of the disc while

pressing  during playback or pause.

PUSH STOP : You pressed PLAY MODE  during

playback.

TIME NG : e Play Timer start and end times are set to

the same time.

Precautions

Discs that this system CAN play

 Audio CD

 CD-R/CD-RW (audio data/MP3 les)

Discs that this system CANNOT play

 CD-ROM

 CD-R/CD-RW other than those recorded in music CD

format or MP3 format conforming to ISO9660 Level

1/Level 2, Joliet

 CD-R/CD-RW recorded in multisession that have not

ended by “closing the session”

 CD-R/CD-RW of poor recording quality, CD-R/

CD-RW that have scratches or are dirty, or CD-R/CD-

RW recorded with an incompatible recording device

 CD-R/CD-RW which is nalized incorrectly

 Discs containing les other than MPEG 1 Audio Layer-

3 (MP3) les

 Discs of non-standard shape (for example, heart,

square, star)

 Discs that have adhesive tape, paper, or sticker attached

to them

 Rental or used discs with attached seals where the glue

extends beyond the seal

 Discs that have labels printed using ink that feels tacky

when touched

Notes on discs

 Before playing, wipe the disc with a cleaning cloth from

the center out to the edge.

 Do not clean discs with solvents, such as benzine,

thinner, or commercially available cleaners or anti-

static spray intended for vinyl LPs.

 Do not expose discs to direct sunlight or heat sources

such as hot air ducts, nor leave it in a car parked in

direct sunlight.

On safety

 Completely disconnect the power cord (mains lead)

from the wall outlet (mains) if it is not going to be used

for an extended period of time. When unplugging the

unit, always grip the plug. Never pull the cord itself.

 Should any solid object or liquid get into the system,

unplug the system, and have it checked by qualied

personnel before operating it again.

 e AC power cord can be changed only by a qualied

service facility.

On placement

 Do not place the system in an inclined position or in

locations that are extremely hot, cold, dusty, dirty, or

humid or lacking adequate ventilation, or subject to

vibration, direct sunlight or a bright light.

 Be careful when placing the unit or speakers on

surfaces that have been specially treated (for example,

with wax, oil, polish) as staining or discoloration of the

surface may result.

 If the system is brought directly from a cold to a warm

location or is placed in a very damp room, moisture

may condense on the lens inside the CD player, and

cause the system to malfunction. In this situation,

remove the disc, and leave the system turned on for

about an hour until the moisture evaporates.

On heat buildup

 Heat buildup on the unit during operation is normal

and is not cause for alarm.

 Do not touch the cabinet if it has been used

continuously at a high volume because the cabinet may

have become hot.

 Do not obstruct the ventilation holes.

On the speaker system

is speaker system is not magnetically shielded, and

the picture on nearby TV sets may become magnetically

distorted. In this situation, turn o the TV, wait 15 to

30 minutes, and turn it back on.

If there is no improvement, move the speakers far away

from the TV.

Cleaning the cabinet

Clean this system with a so cloth slightly moistened

with a mild detergent solution. Do not use any type of

abrasive pads, scouring powder, or solvents, such as

thinner, benzine, or alcohol.

Specications

Main unit

Amplier section

UK model:

DIN power output (rated): 4 watts + 4 watts (4 ohms at 1 kHz, DIN)

Continuous RMS power output (reference): 5 watts + 5 watts (4 ohms at

1 kHz, 10% THD)

Music power output (reference): 9 watts + 9 watts

Australian model:

DIN power output (rated): 4 watts + 4 watts (4 ohms at 1 kHz, DIN)

Continuous RMS power output (reference): 5 watts + 5 watts (4 ohms at

1 kHz, 10% THD)

Input

AUDIO IN (stereo mini jack): Sensitivity 550 mV, impedance 50 kilohms

Outputs

PHONES (stereo mini jack): Accepts headphones with an impedance of

8 ohms or more

SPEAKERS: Accepts impedance of 4 ohms

CD player section

System: Compact disc and digital audio system

Laser Diode Properties

Emission Duration: Continuous

Laser Output*: Less than 44.6µW

* is output is the value measurement at a distance of 200mm from the

objective lens surface on the Optical Pick-up Block with 7mm aperture.

Frequency response: 20 Hz 20 kHz

Signal-to-noise ratio: More than 90 dB

Dynamic range: More than 90 dB

Tuner section

FM stereo, DAB/FM superheterodyne tuner

Antenna: DAB/FM lead antenna

DAB tuner section:

Frequency range*

Band-III: 174.928 (5A) MHz  239.200 (13F) MHz

* For details, see “DAB frequency table” below.

DAB frequency table (Band-III)

Frequency Label Frequency Label

174.928 MHz 5A 209.936 MHz 10A

176.640 MHz 5B 211.648 MHz 10B

178.352 MHz 5C 213.360 MHz 10C

180.064 MHz 5D 215.072 MHz 10D

181.936 MHz 6A 216.928 MHz 11A

183.648 MHz 6B 218.640 MHz 11B

185.360 MHz 6C 220.352 MHz 11C

187.072 MHz 6D 222.064 MHz 11D

188.928 MHz 7A 223.936 MHz 12A

190.640 MHz 7B 225.648 MHz 12B

192.352 MHz 7C 227.360 MHz 12C

194.064 MHz 7D 229.072 MHz 12D

195.936 MHz 8A 230.784 MHz 13A

197.648 MHz 8B 232.496 MHz 13B

199.360 MHz 8C 234.208 MHz 13C

201.072 MHz 8D 235.776 MHz 13D

202.928 MHz 9A 237.488 MHz 13E

204.640 MHz 9B 239.200 MHz 13F

206.352 MHz 9C

208.064 MHz 9D

FM tuner section:

Tuning range: 87.5 MHz 108.0 MHz (50 kHz step)

Intermediate frequency: 2.048 MHz

iPod section

Compatible iPod models:

iPod nano

5th generation

(video camera)

iPod touch

2nd generation/

iPod touch

Late 2009

iPod classic

120 GB

160 GB (2009)

iPod nano

4th generation

(video)

iPod classic

160 GB (2007) iPod touch

1st generation

iPod nano

3rd generation

(video) iPod classic

80 GB

iPod nano

2nd generation

(aluminum)

iPod

5th generation

(video)

iPod nano

1st generation iPod

4th generation

(color display)

iPod

4th generation

iPod mini

Speaker

Speaker system: Full range, 8 cm dia., cone type

Rated impedance: 4 ohms

Dimensions (W/H/D): Approx. 148 mm × 240 mm × 127 mm

Mass: Approx. 1.23 kg net per speaker

General

Power requirements:

UK model: AC 230 V, 50/60 Hz

Australian model: AC 230 V 240 V, 50/60 Hz

Power consumption: 28 watts

Dimensions (W/H/D) (excl. speakers):

Approx. 158 mm × 240 mm × 251.5 mm

Mass (excl. speakers): Approx. 2.3 kg

Supplied accessories: Remote Commander (1), DAB/FM lead antenna (1)

Design and specications are subject to change without notice.

 Standby power consumption: 0.5 W

 Halogenated ame retardants are not used in the certain printed

wiring boards.

iPod

There is no sound.

 Make sure the iPod is connected securely.

 Make sure the iPod is playing music.

 Adjust the volume.

The sound is distorted.

 Make sure the iPod is connected securely.

 Turn down the volume.

 Set the “EQ” setting of the iPod to “O” or “Flat.”

The iPod does not function.

 Make sure the iPod is connected securely.

 Make sure the iPod is updated with the latest soware.

If not, update the iPod before using with the system.

 Because the operation of the system and the iPod are

dierent, you may not operate the iPod using buttons

on the remote or unit. In this case, use the control

buttons on the iPod.

The iPod cannot be charged.

 Make sure the iPod is connected securely.

 You can use the system as a battery charger for iPod

only when the system is on.

“PROTECT” appears.

 A problem has been detected with the level of electrical

current from the iPod connector. Turn o the system

and remove the iPod from the iPod connector. Make

sure there is no problem with the iPod. If this display

pattern persists, contact your nearest Sony dealer.

Tuner

Severe hum or noise, or stations cannot be

received. (“ST” ashes on the display.)

 Connect the antenna properly.

 Find a location and an orientation that provide good

reception, and then set up the antenna again.

 Keep the antennas away from the speaker cords and the

power cord to avoid picking up noise.

 Turn o nearby electrical equipment.

DAB radio station is not received properly.

 Check all antenna connections, then perform the DAB

Automatic Scan procedure (see “Reception of DAB

radio station”).

 e current DAB service may not be available. Press

+ /  to select a dierent service.

 If you have moved to another area, some services/

frequencies may have changed and you may not be able

to tune into your usual broadcast.

Perform the DAB Automatic Scan procedure to

re-register the contents of broadcasts. (Performing this

procedure clears all previously stored presets.)

To improve tuner reception

Turn o CD player power by using the system’s power

management function. By default, CD player power is

turned on.

Use buttons on the unit to turn o the CD player power.

1 Press FUNCTION  repeatedly to select the CD

function.

2 Press   to turn o the system.

3 After “STANDBY” stops ashing, press DISPLAY 

to display the clock, and then press   while

holding down , until “CD POWER OFF” appears.

With CD player power turned o, access time is

increased. To turn on CD player power, repeat the

procedure until “CD POWER ON” appears.

To reset the system to factory settings

If the system still does not operate properly, reset the

system to factory settings.

Use buttons on the unit to reset the unit to its factory

default settings.

1 Disconnect and reconnect the power cord, and then

turn on the system.

2 While holding down FUNCTION  and DAB INITIAL

SCAN , press  .

All user-congured settings, such as preset radio

stations, timer, and the clock, are deleted.

To turn o the automatic standby function

is system is equipped with an automatic standby

function. With this function, the system enters standby

mode automatically in about 30 minutes when there is no

operation or audio signal output.

By default, the automatic standby function is turned on.

Use buttons on the unit to turn o the automatic standby

function.

Hold down   while the system is on, until

“AUTO. STBY OFF” appears.

To turn on the function, repeat the procedure until

“AUTO. STBY ON” appears.

Notes

“AUTO STANDBY” lights up in the display when the automatic

standby function is turned on.

e automatic standby function is invalid for the tuner functions

(DAB/FM), even when “AUTO STANDBY” lights up in the display.

e system may not enter standby mode automatically in the

following cases;

 when an audio signal is detected.

 when an iPod is connected.

 during playback of audio tracks or les.

 while the preset Play Timer or Sleep Timer is in process.

Product specificaties

Merk:	Sony
Categorie:	Audio en video
Model:	CMT-FX350i
Diepte:	127 mm
Microfoon, line-in ingang:	Nee
Uitgangsvermogen:	10 W
Karaoke:	Nee
Apple docking:	Ja
Apple docking-compatibiliteit:	Ja
Subwoofer uit:	Nee
CD-R afspelen:	Ja
CD-RW afspelen:	Ja
Cd-speler:	Ja
Instelbare equalizer:	Nee
Breedte luidspreker:	148 mm
Hoogte luidspreker:	240 mm
CD Text:	Nee
Luidsprekergewicht (met standaard):	1230 g