Sony CMT-EH45DAB Handleiding
Sony
Audio en video
CMT-EH45DAB
Lees hieronder de ๐ handleiding in het Nederlandse voor Sony CMT-EH45DAB (4 pagina's) in de categorie Audio en video. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
WARNING
To reduce the risk of ๎re or electric shock,
do not expose this apparatus to rain or
moisture.
To reduce the risk of ๎re or electric shock, do not expose
this apparatus to dripping or splashing, and do not place
objects ๎lled with liquids, such as vases, on the apparatus.
To reduce the risk of ๎re, do not cover the ventilation
opening of the apparatus with newspapers, tablecloths,
curtains, etc.
Do not place the naked ๎ame sources such as lighted
candles on the apparatus.
As the main plug is used to disconnect the unit from the
mains, connect the unit to an easily accessible AC outlet.
Should you notice an abnormality in the unit, disconnect
the main plug from the AC outlet immediately.
Do not install the appliance in a con๎ned space, such as a
bookcase or built-in cabinet.
Do not expose batteries or apparatus with battery-
installed to excessive heat such as sunshine, ๎re or the
like.
Hooking up the system securely
CAUTION
๎e use of optical instruments with this product will
increase eye hazard.
Except for customers in the U.S.A.
and Canada
๎is appliance is classi๎ed
as a CLASS 1 LASER
product. ๎is marking
is located on the rear
exterior.
European model only
Excessive sound pressure from earphones and
headphones can cause hearing loss.
Notice for the customer in the
countries applying EU Directives
๎e manufacturer of this product is Sony Corporation,
1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. ๎e
Authorized Representative for EMC and product safety is
Sony Deutschland GmbH, Hedel๎nger Strasse 61, 70327
Stuttgart, Germany. For any service or guarantee matters,
please refer to the addresses given in separate service or
guarantee documents.
Disposal of Old Electrical & Electronic
Equipment
(Applicable in the European Union and
other European countries with separate
collection systems)
๎is symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. ๎e recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic O๎ce, your household waste
disposal service or the shop where you purchased the
product.
Applicable accessories: Remote commander
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
๎is symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste. By ensuring these batteries
are disposed of correctly, you will help prevent potentially
negative consequences for the environment and human
health which could otherwise be caused by inappropriate
waste handling of the battery. ๎e recycling of the
materials will help to conserve natural resources.
In case of products that for safety, performance or data
integrity reasons require a permanent connection with an
incorporated battery, this battery should be replaced by
quali๎ed service sta๎ only. To ensure that the battery will
be treated properly, hand over the product at end-of-life
to the applicable collection point for the recycling of
electrical and electronic equipment.
For all other batteries, please view the section on how
to remove the battery from the product safely. Hand the
battery over to the applicable collection point for the
recycling of waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic O๎ce,
your household waste disposal service or the shop where
you purchased the product.
Note on DualDiscs
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
Music discs encoded with copyright
protection technologies
๎is product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and ๎omson.
Antennas
Find a location and an orientation that provide
good reception, and then set up the antenna.
Keep the antenna away from the speaker cords
and the power cord to avoid picking up noise.
Before unplugging the FM/DAB antenna, make
sure the system is turned o๎ to preserve your own
FM and DAB settings.
FM/DAB lead antenna
(Extend it horizontally.)
Power
Connect the power cord to a wall socket.
If the plug does not ๎t the wall socket, detach the
supplied plug adaptor (only for models equipped
with an adaptor).
Right speaker
Wall socket
Speakers
Insert only the stripped portion of the cord.
Speaker cord (Red/ )๎
Speaker cord (Black/ )๎
Left speaker
Basic Operations
Open the tape
section lid.
๎
๎
๎
๎
๎
๎
๎
๎
๎ ๎
๎is manual mainly explains operations using the
remote, but the same operations can also be performed
using the buttons on the unit having the same or similar
names.
Before using the system
To use the remote
Slide and remove the battery compartment lid ๎ป, and
insert the two R6 (size AA) batteries (not supplied), ๎
side ๎rst, matching the polarities shown below.
Notes on using the remote
๎ With normal use, the batteries should last for about six months.
๎ Do not mix an old battery with a new one or mix di๎erent types of
batteries.
๎ If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
To set the clock
Use buttons on the remote to set the clock.
1 Turn on the system.
Press (on/standby) ๎๎๎ ๎ซ.
2 Select the clock set mode.
Press CLOCK/TIMER SET ๎ท. If the current mode
appears, press / ๎
๎ ๎ฌ repeatedly to select
โCLOCK,โ and then press ENTER ๎น.
3 Set the time.
Press / ๎
๎ ๎ฌ repeatedly to set the hour, and
then press ENTER ๎น. Use the same procedure to set
the minutes.
๎e clock settings are lost when you disconnect the
power cord or if a power failure occurs.
To run the DAB Automatic Scan
When you turn on the system for the ๎rst time a๎er
you purchase the system, DAB Automatic Scan starts
automatically and creates a list of available services. If
you want to run the DAB Automatic Scan again, perform
the procedure below.
1 Press DAB AUTO SCAN ๎ญ on the unit.
โDAB SCANโ and โPUSH DABโ appear.
2 Press DAB ๎ญ on the unit.
Scanning begins. ๎e scanning progress is indicated
by advancing asterisks. Depending on the DAB
services available in your area, scanning may take a
few minutes.
When scanning is complete, a list of available services
is created.
Notes
๎ If your country or region does not support DAB broadcast,
โNO SERVโ appears.
๎ Do not press any button on the unit or the remote during DAB
Automatic Scan. If scanning is interrupted, run the DAB Automatic
Scan again.
๎ If you move to another area, repeat this procedure to store the
stations for your new area.
๎ ๎is procedure clears all previously stored presets.
๎ Before unplugging the DAB antenna, make sure the system is turned
o๎ to preserve your own DAB settings.
๎ ๎is tuner does not support data services.
Selecting a music source
Press the following buttons (or press FUNCTION ๎ฑ
repeatedly).
To select Press
CD CD .๎ฑ
Tuner TUNER/BAND .๎ฑ
DAB DAB on the unit.๎ญ
Tape FUNCTION ๎ฑ
repeatedly until โTAPEโ
appears.
Component* (connected
using an audio cord)
AUDIO IN .๎ฑ
* If the component has the AVLS (Automatic Volume Limiter System)
or BASS BOOST function, turn o๎ the function to avoid distorted
sound from the speakers.
Adjusting the sound
To adjust the volume
Press VOLUME +/ (or turn the VOLUME control on ๎
the unit) ๎ฒ.
To add a sound e๎ect
To Press
Generate a more dynamic
sound (Dynamic Sound
Generator X-tra)
DSGX on the unit.๎ฎ
Set the sound e๎ect EQ .๎ผ
Playing a CD/MP3 disc
1 Select the CD function.
Press CD (or FUNCTION repeatedly) ๎ฑ.
2 Place a disc.
Press PUSH OPEN/CLOSE on the unit, and place a ๎ฎ
disc with the label side up on the CD compartment.
To close the CD compartment, press PUSH OPEN/๎ฎ
CLOSE on the unit.
๎ฎPUSH OPEN/CLOSE
3 Start playback.
Press (play) (or CD/ (play/pause) on the unit) ๎ข ๎
๎ฑ.
To Press
Pause playback ๎ฌ ๎ (pause) (or CD/ on the
unit) . To resume play, press ๎ฑ
it again.
Stop playback ๎ (stop) ๎ฐ.
Select a folder on an
MP3 disc +/ (select folder) ๎๎บ.
Select a track or ๎le ๎
๎/ (go back/go forward)
( / on the unit) .๎บ ๎ ๎ฌ
Find a point in a
track or ๎le
Hold down / (rewind/๎ป ๎ก
fast forward) during playback, ๎ฌ
and release it at the desired point.
Select Repeat Play REPEAT repeatedly until ๎ธ
โREPโ or โREP1โ appears.
To change the play mode
Press PLAY MODE ๎ธ repeatedly while the player is
stopped. You can select normal play (โ โ for all MP3
๎les in the folder on the disc), shu๎e play (โSHUFโ or
โ SHUF*โ), or program play (โPGMโ).
* When playing a CD-DA disc, (SHUF) Play performs the same
operation as SHUF Play.
Notes on Repeat Play
๎ All tracks or ๎les on a disc are played repeatedly up to ๎ve times.
๎ โREP1โ indicates that a single track or ๎le is repeated until you stop
it.
Notes on playing MP3 discs
๎ Do not save other types of tracks or ๎les or unnecessary folders on a
disc that has MP3 ๎les.
๎ Folders that have no MP3 ๎les are skipped.
๎ MP3 ๎les are played back in the order that they are recorded onto
the disc.
๎ ๎e system can only play MP3 ๎les that have a ๎le extension of
โ.MP3โ.
๎ If there are ๎les on the disc that have the โ.MP3โ ๎le extension,
but that are not MP3 ๎les, the unit may produce noise or may
malfunction.
๎ ๎e maximum number of:
๎ folders is 150 (including the root folder).
๎ MP3 ๎les is 255.
๎ MP3 ๎les and folders that can be contained on a single disc is 256.
๎ folder levels (the tree structure of ๎les) is 8.
๎ Compatibility with all MP3 encoding/writing so๎ware, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
Notes on playing multisession discs
๎ If the disc begins with a CD-DA (or MP3) session, it is recognized
as a CD-DA (or MP3) disc, and playback continues until another
session is encountered.
๎ A disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
Listening to the radio
Before you can receive DAB, you must complete the
DAB Automatic Scan procedure (see โBefore using the
systemโ).
1 Select โDABโ or โFM.โ
Press TUNER/BAND ๎ฑ repeatedly. You can also
select DAB directly by pressing DAB ๎ญ on the unit.
2 Select the tuning mode.
Press TUNING MODE ๎ธ repeatedly until โAUTOโ
appears.
3 Tune in the desired station.
Press +/ (or TUNING +/ on the unit) ๎ ๎ ๎ฌ.
Scanning stops automatically when a station is tuned
in, and then โTUNEDโ (DAB only) and โSTEREOโ
(for stereo programs) appear. When you tune in a
DAB station or an FM station that provides RDS
services, the service name or station name appears.
Tip
Press (stop) ๎๎ฐ to stop automatic scanning (FM band only).
To tune in a station with a weak signal
(FM band only)
Press TUNING MODE ๎ธ repeatedly until โMANUALโ
appears, and then press +/ (or TUNING +/ on the ๎ ๎
unit) ๎ฌ repeatedly to tune in the desired station.
To reduce static noise on a weak FM stereo
station
Press FM MODE ๎ธ repeatedly until โMONOโ appears
to turn o๎ stereo reception.
Notes on listening to DAB stations
๎ When tuning in a DAB station, it may take a few seconds before you
hear any sound.
๎ Primary service is automatically received when secondary service
ends.
Playing a tape
Use buttons on the unit to play a tape.
1 Select the tape function.
Press FUNCTION ๎ฑ repeatedly.
2 Insert a tape.
Press (stop/eject) ๎๎ฎ ๎ณ, and insert the tape into the
cassette holder. Make sure there is no slack in the tape
to avoid damaging the tape or the tape deck.
3 Start playback.
Press (play) ๎ข๎ณ.
To Press
Pause playback ๎ฌ (pause) ๎ณ. To resume play, press
it again.
Stop playback ๎๎ฎ (stop/eject) ๎ณ.
Rewind or fast
forward*
๎ป ๎ก/ (rewind/fast forward) .๎ณ
* Be sure to press (stop/eject) ๎๎ฎ ๎ณ a๎er the tape has been wound
or rewound to the end.
Note
Do not turn o๎ the system during playback or recording.
3-294-219-13(1)
CMT-EH45DAB
ยฉ 2008 Sony Corporation Printed in China
Micro HI-FI
Component
System
Operating Instructions
Changing the display
To change Press
Information on
the display1)
DISPLAY repeatedly when the ๎พ
system is on.
Display mode
(Clock)
DISPLAY when the system is ๎พ
off2). ๎e clock is displayed for eight
seconds.
1) For example, you can view:
๎ CD/MP3 disc information such as the track or ๎le number, folder
name during normal play, or the total play time while the player is
stopped.
๎ DAB station information such as the service name, channel label,
DLS (Dynamic Label Segment), or ensemble label.
2) ๎e STANDBY indicator ๎ถ lights up when the system is turned o๎.
Notes on the display information
๎ ๎e following are not displayed;
๎ total playing time for a CD-DA disc depending on the play mode.
๎ total playing time for an MP3 disc.
๎ remaining playing time for a track and an MP3 ๎le.
๎ ๎e following are not displayed correctly;
๎ elapsed playing time of an MP3 ๎le encoded using VBR (variable
bit rate).
๎ folder and ๎le names that do not follow either ISO9660 Level 1,
Level 2 or Joliet in the expansion format.
๎ ๎e following are displayed;
๎ ID3 tag information for MP3 ๎les when ID3 version 1 and
version 2 tags are used.
๎ up to 15 characters of ID3 tag information using uppercase letters
(A to Z), numbers (0 to 9), and symbols (" $ % โ ( ) * + , โ . / < = >
@ [ \ ] _ ` { | } ! ? ^).
๎ up to 8 characters of service name, up to 128 characters of DLS
(Dynamic Label Segment) and up to 16 characters of ensemble
label using uppercase letters (A to Z), numbers (0 to 9), and
symbols (" $ % โ ( ) * + , โ . / < = > @ [ \ ] _ ` { | } ! ? ^).
Using optional audio components
To connect an optional headphones
Connect headphones to the PHONES jack ๎ด on the
unit.
To connect an optional component
Connect additional audio source component to the
AUDIO IN jack ๎ต on the unit using an audio analog
cord (not supplied). Turn down the volume on the
system, and then select the AUDIO IN function.
Other Operations
Creating your own CD program
(Program Play)
Use buttons on the remote to create your own program.
1 Press CD ๎ฑ to select the CD function.
2 Press PLAY MODE ๎ธ repeatedly until โPGMโ appears
while the player is stopped.
3 Press / ๎
๎ ๎ฌ repeatedly until the desired
track number appears.
When programming MP3 ๎les, press +/ ๎๎บ
repeatedly to select the desired folder, and then select
the desired ๎le.
Selected track or ๎le number
4 Press ENTER ๎น to add the track or ๎le to the
program.
5 Repeat steps 3 through 4 to program additional
tracks or ๎les, up to a total of 15 tracks or ๎les.
6 To play your program of tracks or ๎les, press ๎ข๎ฑ.
๎e program remains available until you open the CD
compartment. To play it again, select the CD function,
and then press ๎ข๎ฑ.
To cancel Program Play, press PLAY MODE ๎ธ
repeatedly until โPGMโ disappears while the player is
stopped.
To delete the last track or ๎le of the program, press
CLEAR ๎ฝ while the player is stopped.
To view program information, such as total track number
of the program, press DISPLAY ๎พ repeatedly.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1 Tune in the desired station (see โListening to the
radioโ).
2 Press TUNER MEMORY ๎ธ.
Preset number
3 Press +/ ๎๎ฌ repeatedly to select your desired
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4 Press ENTER ๎น.
5 Repeat steps 1 through 4 to store other stations.
You can preset up to 20 DAB and 20 FM stations. ๎e
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6 To call up a preset radio station, press TUNING
MODE ๎ธ repeatedly until โPRESETโ appears, and
then press +/ ๎๎ฌ repeatedly to select the desired
preset number.
Note on presetting DAB stations
You can preset a DAB service only when it can be received.
Recording onto a tape
Use a TYPE I (normal) tape only.
You can record just the portions you like from a sound
source, including connected audio components.
Use buttons on the unit to control tape recording.
1 Insert a recordable tape into the cassette holder
with the side you want to record facing forward.
2 Prepare the recording source.
Select the desired source to record.
Place the disc you want to record.
When recording a folder from an MP3 disc, press
PLAY MODE ๎ธ on the remote repeatedly to select
โ ,โ and then press +/ ๎๎บ repeatedly to select
the desired folder.
To record only your favorite CD tracks or MP3 ๎les in
your desired order, perform steps 2 to 5 of โCreating
your own CD program.โ
3 Start recording.
Press (record) ๎๎ณ, and then start playing the
desired recording source.
๎e CD starts playing automatically.
If there is noise while recording from the tuner,
reposition the appropriate antenna to reduce the
noise.
While recording, you cannot listen to other sources.
To stop recording, press ๎๎ฎ ๎ณ.
Tip
We recommend that you press ๎ฌ๎ณ ๎rst, and then press ๎๎ฎ๎ณ to
avoid noise being recorded when you stop recording.
Using the Timers
๎e system o๎ers two timer functions. If you use both
timers, the Sleep Timer has priority.
Use buttons on the remote to use the timer functions.
Sleep Timer:
You can fall asleep to music. ๎is function works even if
the clock is not set.
Press SLEEP ๎ฟ repeatedly. If you select โAUTO,โ the
system automatically turns o๎ a๎er the current disc or
tape stops or in 100 minutes.
If the tape deck is still playing or recording at the set
time, the system turns o๎ a๎er the tape deck stops.
Play Timer:
You can wake up to CD or tuner at a preset time.
Make sure you have set the clock.
1 Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/ ๎๎ฒ to adjust the volume.
To start from a speci๎c CD track or MP3 ๎le, create
your own CD program.
2 Press CLOCK/TIMER SET ๎ท.
3 Press / ๎
๎ ๎ฌ repeatedly to select โPLAY SET,โ
and then press ENTER ๎น.
โON TIMEโ appears, and the hour indication ๎ashes.
4 Set the time to start playing.
Press ๎
๎/ ๎ฌ repeatedly to set the hour, and
then press ENTER ๎น.
๎e minute indication ๎ashes. Use the procedure
above to set the minutes.
5 Use the same procedure as in step 4 to set the time
to stop playing.
6 Select the sound source.
Press / ๎
๎ ๎ฌ repeatedly until the desired
sound source appears, and then press ENTER ๎น. ๎e
display shows the timer settings.
7 Press ๎๎๎ ๎ซ to turn o๎ the system.
๎e system turns on 15 seconds before the preset time.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again, press CLOCK/
TIMER SELECT ๎ท, press / ๎
๎ ๎ฌ repeatedly until
โPLAY SELโ appears, and then press ENTER ๎น.
To cancel a timer, repeat the same procedure as above
until โOFFโ appears, and then press ENTER ๎น.
To change the setting, start over from step 1.
Tip
๎e Play Timer setting remains as long as the setting is not canceled
manually.
1 Make sure the power cord and speaker cords are
correctly and ๎rmly connected.
2 Find your problem in the checklist below, and take
the indicated corrective action.
If the issue persists, contact your nearest Sony dealer.
If the STANDBY indicator ๎ashes
Immediately unplug the power cord, and check the
following item.
๎ If your system has a voltage selector, is the voltage
selector set to the correct voltage?
A๎er the STANDBY indicator ๎ถ stops ๎ashing,
reconnect the power cord, and turn on the system. If
the issue persists, contact your nearest Sony dealer.
General
The system unexpectedly shuts o๎ while
operating.
๎ Are the + and speaker cords short-circuited? ๎
Make sure the speaker cords are correctly connected.
There is no sound.
๎ Are the + and speaker cords short-circuited?๎
๎ Connect only the supplied speakers.
๎ Do not obstruct the ventilation holes.
๎ ๎e speci๎ed station may have temporarily stopped
broadcast.
Sound comes from one channel, or the left and
right volumes are unbalanced.
๎ Place the speakers as symmetrically as possible.
๎ Connect only the supplied speakers.
Severe hum or noise.
๎ Move the system away from sources of noise.
๎ Connect the system to a di๎erent wall socket.
๎ Install a noise ๎lter (available separately) to the power
cord.
The remote does not function.
๎ Remove any obstacles between the remote and the
remote sensor ๎ฏ on the unit, and position the unit
away from ๎uorescent lights.
๎ Point the remote at the systemโs sensor.
๎ Move the remote closer to the system.
CD/MP3 player
The sound skips, or the disc will not play.
๎ Wipe the disc clean, and replace it.
๎ Move the system to a location away from vibration (for
example, on top of a stable stand).
๎ Move the speakers away from the system, or place them
on separate stands. At high volume, speaker vibration
may cause the sound to skip.
Play does not start from the ๎rst track.
๎ Return to Normal Play by pressing PLAY MODE ๎ธ
repeatedly until both โPGMโ and โSHUFโ disappear.
Starting playback takes more time than usual.
๎ ๎e following discs take a longer time to start playback.
๎ a disc recorded with a complicated tree structure.
๎ a disc recorded in multisession mode.
๎ a disc that has not been ๎nalized (a disc to which data
can be added).
๎ a disc that has many folders.
Tuner
Severe hum or noise, or stations cannot be
received. (โTUNEDโ or โSTEREOโ ๎ashes on the
display.)
๎ Connect the antenna properly.
๎ Find a location and an orientation that provide good
reception, and then set up the antenna again.
๎ Keep the antenna away from the speaker cords and the
power cord to avoid picking up noise.
๎ Turn o๎ nearby electrical equipment.
โTUNEDโ does not appear in the display (DAB
only).
๎ Check all antenna connections, then perform the DAB
Automatic Scan (see โBefore using the systemโ).
๎ ๎e current DAB service may not be available. Press
+/ (or TUNING + or on the unit) ๎ ๎ ๎ฌ to select a
di๎erent service.
๎ If you have moved to another area, some services/
frequencies may have changed and you may not be able
to tune into your usual broadcast.
Perform the DAB Automatic Scan procedure to re-
register the contents of broadcasts. (Performing this
procedure clears all previously stored presets.)
Tape deck
The sound exhibits excessive wow or ๎utter or
dropout.
๎ Clean the capstans and pinch rollers. Also, clean and
demagnetize the tape heads. See โPrecautionsโ for
details.
Troubleshooting To reset the system to factory settings
If the system still does not operate properly, reset the
system to factory settings.
Use buttons on the unit to reset the unit to its factory
default settings.
1 Disconnect and reconnect the power cord, and then
turn on the system.
2 Press ๎๎ฐ, ๎บ ๎ฌ, and ๎๎๎ ๎ซ at the same time.
All user-con๎gured settings, such as preset radio
stations, timer, and the clock, are deleted.
Messages
COMPLETE : ๎e preset operation ended normally.
FULL : You tried to program more than 15 tracks (steps).
NO DISC : ๎ere is no disc in the player, or you have
loaded a disc that cannot be played.
NOPRESET (DAB only) : ๎ere is no stored preset
station.
NO SERV (DAB only) : ๎ere is no supported DAB
broadcast in your country or region.
NO STEP : All of the programmed tracks have been
erased.
No TEXT (DAB only) : ๎ere is no text information in
the received service.
NOT USED : You pressed an invalid button.
OVER : You have reached the end of the disc while
pressing ๎ก๎ฌ during playback or pause.
PUSH SELECT : You tried to set the clock or timer during
timer operation.
PUSH STOP : You pressed PLAY MODE ๎ธ during
playback.
READING : ๎e system is reading information from the
disc. Some buttons are not available.
SET CLOCK : You tried to select the timer when the clock
is not set.
SET TIMER : You tried to select the timer when the Play
Timer is not set.
TIME NG : ๎e Play Timer start and end times are set to
the same time.
Display examples
Display indicates
2 (two)
5 (๎ve)
6 (six)
8 (eight)
0 (zero)
A
B
D
G
H
K
M
O
Q
R
S
Z
! or |
โ
$
%
,
.
?
@
^
Precautions
Discs that this system CAN play
๎ Audio CD
๎ CD-R/CD-RW (audio data/MP3 ๎les)
Discs that this system CANNOT play
๎ CD-ROM
๎ CD-R/CD-RW other than those recorded in music CD
format or MP3 format conforming to ISO9660 Level 1/
Level 2, Joliet or multisession
๎ CD-R/CD-RW recorded in multisession that have not
ended by โclosing the sessionโ
๎ CD-R/CD-RW of poor recording quality, CD-R/CD-
RW that have scratches or are dirty, or CD-R/CD-RW
recorded with an incompatible recording device
๎ CD-R/CD-RW which is ๎nalized incorrectly
๎ Discs containing ๎les other than MPEG 1 Audio
Layer-3 (MP3) ๎les
๎ Discs of non-standard shape (for example, heart,
square, star)
๎ Some discs that have adhesive tape, paper, or sticker
attached to them
๎ Some rental or used discs with attached seals where the
glue extends beyond the seal
๎ Some discs that have labels printed using ink that feels
tacky when touched
Notes on discs
๎ Before playing, wipe the disc with a cleaning cloth from
the center out to the edge.
๎ Do not clean discs with solvents, such as benzine
thinner, or commercially available cleaners or
anti-static spray intended for vinyl LPs.
๎ Do not expose discs to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
direct sunlight.
On safety
๎ ๎e unit is not disconnected from the mains as long as
it is connected to the AC outlet, even if the unit itself
has been turned o๎.
๎ Completely disconnect the power cord (mains lead)
from the wall socket (mains) if it is not going to be used
for an extended period of time. When unplugging the
unit, always grip the plug. Never pull the cord itself.
๎ Should any solid object or liquid get into the system,
unplug the system, and have it checked by quali๎ed
personnel before operating it again.
๎ ๎e AC power cord can be changed only by a quali๎ed
service facility.
On placement
๎ Do not place the system in an inclined position or in
locations that are extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
๎ Be careful when placing the unit or speakers on
surfaces that have been specially treated (for example,
with wax, oil, polish) as staining or discoloration of the
surface may result.
๎ If the system is brought directly from a cold to a warm
location or is placed in a very damp room, moisture
may condense on the lens inside the CD player, and
cause the system to malfunction. In this situation,
remove the disc, and leave the system turned on for
about an hour until the moisture evaporates.
On heat buildup
๎ Heat buildup on the unit during operation is normal
and is not cause for alarm.
๎ Do not touch the cabinet if it has been used
continuously at a high volume because the cabinet may
have become hot.
๎ Do not obstruct the ventilation holes.
On the speaker system
๎is speaker system is not magnetically shielded, and
the picture on nearby TV sets may become magnetically
distorted. In this situation, turn o๎ the TV, wait 15 to
30 minutes, and turn it back on.
If there is no improvement, move the speakers far away
from the TV.
Cleaning the cabinet
Clean this system with a so๎ cloth slightly moistened
with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
To prevent a tape from being accidentally
recorded over
Break o๎ the cassetteโs overwrite protection tab from side
A or B as illustrated.
Break o๎ the cassette
tab
To later reuse the tape for recording, cover the broken tab
with adhesive tape.
About a tape longer than 90 minutes
๎e use of the tape with more than 90 minutes of play
time is not recommended except for long, continuous
recording or playback.
Cleaning the tape heads
Use dry- or wet-type cleaning cassette (available
separately) a๎er every 10 hours of use, before you start an
important recording, or a๎er playing an old tape. Failure
to clean the tape heads can cause degraded sound quality
or an inability of the unit to record or play tapes. For
details, refer to the instructions of the cleaning cassette.
Demagnetizing the tape heads
Use a demagnetizing cassette (available separately) a๎er
every 20 to 30 hours of use. Failure to demagnetize
the tape heads can cause an increase in noise, a loss of
high frequency sound, and an inability to completely
erase tapes. For details, refer to the instructions of the
demagnetizing cassette.
Speci๎cations
Main unit
Ampli๎er section
DIN power output (rated): 4 + 4 W (4 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 5 + 5 W (4 ohms at 1 kHz,
10% THD)
Music power output (reference): 7 + 7 W
Inputs
AUDIO IN (stereo mini jack): Sensitivity 800 mV, impedance 47 kilohms
Outputs
PHONES (stereo mini jack): Accepts headphones with an impedance of
8 ohms or more
SPEAKER: Accepts impedance of 4 ohms
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6ยตW
* ๎is output is the value measurement at a distance of 200 mm from the
objective lens surface on the Optical Pick-up Block with 7 mm aperture.
Frequency response: 20 Hz 20 kHz๎
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Tape deck section
Recording system: 4-track 2-channel, stereo
Tuner section
FM/DAB stereo tuner
Antenna:
FM/DAB lead antenna
FM tuner section:
Tuning range: 87.5 108.0 MHz (50 kHz step)๎
Intermediate frequency: 10.7 MHz
DAB tuner section:
Frequency range
Band-III: 174.928 (5A) 239.200 (13F) MHz ๎
* For details, see โDAB frequency tableโ below.
DAB frequency table (Band-III)
Frequency Label Frequency Label
174.928 MHz 5A 209.936 MHz 10A
176.640 MHz 5B 211.648 MHz 10B
178.352 MHz 5C 213.360 MHz 10C
180.064 MHz 5D 215.072 MHz 10D
181.936 MHz 6A 216.928 MHz 11A
183.648 MHz 6B 218.640 MHz 11B
185.360 MHz 6C 220.352 MHz 11C
187.072 MHz 6D 222.064 MHz 11D
188.928 MHz 7A 223.936 MHz 12A
190.640 MHz 7B 225.648 MHz 12B
192.352 MHz 7C 227.360 MHz 12C
194.064 MHz 7D 229.072 MHz 12D
195.936 MHz 8A 230.784 MHz 13A
197.648 MHz 8B 232.496 MHz 13B
199.360 MHz 8C 234.208 MHz 13C
201.072 MHz 8D 235.776 MHz 13D
202.928 MHz 9A 237.488 MHz 13E
204.640 MHz 9B 239.200 MHz 13F
206.352 MHz 9C
208.064 MHz 9D
* Frequencies are displayed to two decimal places on this system.
Speaker
Speaker system: Full Range, 8 cm dia., cone type
Nominal impedance: 4 ohms
Dimensions (w/h/d): Approx. 148 ร 241 ร 135.5 mm
Mass: Approx. 1.3 kg net per speaker
General
Power requirements: AC 230 V, 50/60 Hz
Power consumption: 25 W
Dimensions (w/h/d) (excl. speakers): Approx. 155 ร 241 ร 224.6 mm
Mass (excl. speakers): Approx. 2.2 kg
Supplied accessories: Remote Commander (1)/FM/DAB lead antenna (1)
Design and speci๎cations are subject to change without notice.
โข Standby power consumption: 1.0 W
โข Halogenated ๎ame retardants are not used in the
certain printed wiring boards.
โข Halogenated ๎ame retardants are not used in cabinets.
Product specificaties
| Merk: | Sony |
| Categorie: | Audio en video |
| Model: | CMT-EH45DAB |
Heb je hulp nodig?
Als je hulp nodig hebt met Sony CMT-EH45DAB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Audio en video Sony
22 December 2022
21 December 2022
19 December 2022
19 December 2022
17 December 2022
8 December 2022
7 December 2022
2 December 2022
30 November 2022
30 November 2022
Andere handleidingen Sony
18 December 2024
18 December 2024
18 December 2024
16 December 2024
16 December 2024
5 December 2024
22 November 2024
22 November 2024
22 November 2024
22 November 2024