Snooper SR200 GPS Sport watch Handleiding

Snooper Personal navigatie SR200 GPS Sport watch

Lees hieronder de 📖 handleiding in het Nederlandse voor Snooper SR200 GPS Sport watch (12 pagina's) in de categorie Personal navigatie. Deze handleiding was nuttig voor 73 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Keeping you one step ahead
User manual
SR200 GPS SPORTS WATCH
2 • UK
Congratulations on purchasing your Snooper RUN SR200
Your new Snooper RUN SR200 is packed with loads of great features. It uses the latest micro GPS technology and Snooper’s
comprehensive RUN software to provide you with all the features and functions you would expect to find on one of the most
advanced training watches on the market.
First, charge the battery
Before you use your SR200, you must charge the lithium battery for at least 4 hours, using the USB charging clip/cable. Ongoing
charging times will depend on usage. Recharge whenever the display indicates a ‘low’ battery.
Warning: You must recharge every 1-2 months, even if your SR200 is not being used.
While the battery is charging, your SR200 cannot be used and all buttons are disabled.
When the battery is full, the display will read CHARGE 100%. The battery life is 8 hours when you are using a function that needs GPS,
such as RUN. If GPS is off, say in TIME mode, the battery will last up to 12 months.
Charging your battery – step by step
1. Plug your SR200 into your PC with the USB charging clip/cable provided.
2. Align the charging clip with the contact pins on the back of your SR200.
3. Connect the charging clip securely to your SR200. Your SR200 will display CHARGE and the percentage charge level of the
battery.
User Tip: Thoroughly dry the charging contacts and surrounding area to ensure good electrical contact and prevent corrosion.
Battery low condition
You cannot turn on GPS when the battery is low. You will need to recharge the battery first, before your SR200 can connect to GPS.
When battery level becomes very low, your SR200 will automatically turn off, and the screen will go blank.
In RUN mode, if your SR200 automatically turns off because there is not sufficient power in the battery, you will lose any information
that was being collected during that session.
Previously stored and saved data will not be lost. You only lose data that was being collected, and that was not saved prior to the
battery running out.
User Tip: Always make sure the battery has enough power to complete training session before you start, as any data collected,
but not saved, will be lost.
SR200 GPS SPORTS WATCH
3 • UK
Getting to know the buttons and modes
Push button functions
S1 – Start / Stop / Up (+)
S5 View / Lap
S7 – Change Mode / Exit
S11 – Light / Set / Save
Your main SR200 modes
Press S7 to scroll through the main modes of your SR200:
TIME: Allows you can set and view two time zones e.g. London and New York City. See full details of how to set the
time on page 15
RUN: You can view the following functions: PACE, SPEED, CAL, CLOCK, CHRONO, DISTANCE.
CHRONO: Chronograph
DATA: View statistics of training sessions saved.
ALARM: Set up to five alarms a day.
SET: Change watch and user settings.
Scrolling through modes/shortcuts
Press S7 to scroll through your SR200 main modes: TIME, RUN, RUN DATA AND ALARM.
User Tip: Short cuts. To launch RUN directly from TIME mode press S5.
We will look at the modes in detail, later in this manual.
TIME mode
PRESS S5 TO GO TO RUN
SHORTCUT
START
RUN mode
RUN DATA modeALARM mode
P
R
E
S
S
S
7
P
R
E
S
S
S
7
P
R
E
S
S
S
7
P
R
E
S
S
S
7


Product specificaties

Merk: Snooper
Categorie: Personal navigatie
Model: SR200 GPS Sport watch

Heb je hulp nodig?

Als je hulp nodig hebt met Snooper SR200 GPS Sport watch stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Personal navigatie Snooper

Handleiding Personal navigatie

Nieuwste handleidingen voor Personal navigatie