Snooper PB80 Powerbank Handleiding

Snooper Accu oplader PB80 Powerbank

Lees hieronder de 📖 handleiding in het Nederlandse voor Snooper PB80 Powerbank (44 pagina's) in de categorie Accu oplader. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/44
PB80 12,000mAh WITH 400amp JUMP START
USER MANUAL • UK
GEBRUIKSAANWIJZING • NL
GUIDE DE L’UTILISATEUR • FR
BENUTZERHANDBUCH • DE
MANUAL DEL USUARIO • ES
MANUALE PER L’UTENTE • IT
UK • 2
PB80 USER MANUAL • UK
Thank you for choosing Ventura Portable Power. Always follow
basic safety precautions when using electrical appliances. Read all
instructions carefully, Please keep this instruction manual for easy
reference.
Product Information
LED Flash Light
Jumper cable
with clamps
Switch cable A Switch cable B
For 12V vehicle
products
Home
adaptor Car
adaptor
Jump start socket 19V 3.5A output port
LED indicators
Operation
button
USB 5V 2A output port
12V 10A output port
12V 1A input port
UK • 3
Operation
Press the Operation Button to check the storage level of your PB80
powerbank.
Indicator Unlit 5 Flashing 1 solid 2 solid 3 solid 4 solid 5 solid
Storage level 0% 10% 20% 40% 60% 80% 100%
The LED indicators will flash one by one during charging. The current
storage level will be indicated by the number of LED’s illuminated. Once
your PB80 is fully charged or if charging is paused, the LED’s will power
off.
Charging your PB80 Powerbank using the Home charger.
1. Connect the home charger included to the 12V 1A input port on your
PB80.
2. Plug the opposite end of the Home charger in to a standard AC wall
socket and allow to charge until all the LED indicators have powered off.
Charging your PB80 Powerbank using the Vehicle charger.
1. Connect the vehicle charger included to the 12V 1A input port on
your PB80.
2. Plug the opposite end of the vehicle charger in to the cigarette lighter
socket in your vehicle and allow to charge until all the LED indicators
have powered off.
Jump starting a 12V vehicle
1. Ensure that your PB80 is showing at least 3 LED power level indicators.
If your PB80 is showing less than 3 LED power level indicators it may not
have enough power to Jump start your vehicle.
2. Connect the RED clamp to the vehicle’s positive (+) battery terminal
and the BLACK clamp to the vehicle’s negative (-) battery terminal.


Product specificaties

Merk: Snooper
Categorie: Accu oplader
Model: PB80 Powerbank

Heb je hulp nodig?

Als je hulp nodig hebt met Snooper PB80 Powerbank stel dan hieronder een vraag en andere gebruikers zullen je antwoorden