SmartAVI RK-DVS4P-8S Handleiding
Lees hieronder de ๐ handleiding in het Nederlandse voor SmartAVI RK-DVS4P-8S (2 pagina's) in de categorie Splitter. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
ยฉ Copyright 2009 Smart-AVI, All Rights Reserved
Notice
The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties
of merchantability and fitness for any particular
purpose.
Smart-AVI will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material.
No part of this document may be photocopied,
reproduced or translated into another language
with
out prior written consent from Smart-AVI.
The DVI-I 4 port splitter allows you to use
a single PC/MAC to display
identical images on multiple monitors.
DVS4P
www.smartavi.com
User Manual
2840 N. Naomi Ave.
Burbank, California 91504
Phone: (818) 565-0011
Facsimile: (818) 565-0020
Technical Specifications
Input/Output Signal
Pin # Signal SignalPin #
1 T.M.D.S Data 2- 16 Hot Plug Detect
2 T.M.D.S Data 2+ T.M.D.S Data 0-17
3 T.M.D.S Data 2/4 Shield T.M.D.S Data 0+18
4 T.M.D.S Data 4- T.M.D.S Data 0/5 Shield19
5 T.M.D.S Data 4+ T.M.D.S Data 5-20
6 DDC Clock 21 T.M.D.S Data 5+
7 DDC Data 22 T.M.D.S Clock Shield
8 Analog Vert. Sync 23 T.M.D.S Clock+
9 T.M.D.S Data 1- T.M.D.S Clock -24
10 T.M.D.S Data 1+
11 T.M.D.S Data 1/3 Shield C1 Analog Red
12 T.M.D.S Data 3- C2 Analog Green
13 T.M.D.S Data 3+ C3 Analog Blue
14 +5V Power C4 Analog Horz Sync
15 GND C5 Analog Ground
Video Input 1 DVI Female
Video Output 4 DVI Female
Max. Resolution 1920 x 1200 60 @ Hz
Cable Distance to Monitor 10 m (max)
Signal Type Standard DVI Signal
Power Adapter (min) 5VDC 1A
Housing Metal
Weight .65lb (.29kg)
Dimensions (LxWxH) 7.93โ x 3.56โ x 1.56โ m_DVS4P-012709
Specifications
Introduction
The DVS4P splitter allows you to use a single PC to
display identical images on multiple monitors.
DVI Splitter is ideal for:
๏ฎ๎ Test bench facilities
๏ฎ๎ Data Center
๏ฎ๎ Help Desks
Features
๏ฎ๎ Use PanelLink digital technology
๏ฎ๎ Supports high-resolution dislplay up to UXGA
(25-165MHz)
๏ฎ๎ Can be cascaded
๏ฎ๎ Compliant with the specification of DVI 1.0
๏ฎ Resolution up to 1920 x 1080
๏ฎ๎No degradation of video quality
๏ฎ๎External pwer supply
๏ฎ๎Automatic EDID learning fo the support of
any DVI monitor.
๏ฎ๎DVI and VGA
Package Contents
๏ฎ๎ 1 DVS4P 4Port DVI splitter
๏ฎ๎ 1 User Manual
๏ฎ๎ 1 Power Adapter 5VDC 1A
Installation
1. Turn off computer and monitor.
2. Connect DVI male extension cable between the
PC and the โvideo inโ port of splitter.
3. Connect the DVI male/female extension cables
between the monitors and the โDVI outโ ports
of splitter.
4. Connect the power cord and turn on the
splitter.
5. Turn on PC and monitors.
Operation for Cascade
1. The function to display identical images on
more monitors, is an attachment of another
splitter.
2. Connect the DVI male/female extendion cable
between the former splitter of the โDVI out 1โ
port and the latter splitter of the โvideo inโ port.
Note:
Even though you are allowed to cascade the splitter
with varied ports, the image might become unstable
if you cascade too many tiers of splitters.
Installation Diagram
EDID Learning
The Display Data Channel (DDC) is a digital
connection between a computer display and
a graphics adapter that allows the display to
communicate its specifications to the adapter.
The Extended Display Identification Data (EDID) is a
data structure provided by a computer display over
the DDC to describe its capabilities to a graphics
card.
The DVS4P does not continue the DDC across the
CAT6 STP links and contains its own EDID at the
video source input. Therefore, the EDID on the
DVS4P is used in place of the actual monitors EDID.
In order for the computer to output at the correct
resolution and refresh rates for a specific monitor,
the DVS4P must be loaded with the monitors EDID.
On power-up the DVS4P reads and stores the EDID
of the DVI monitor connected to the local loopback
port. IF the local loopback port is disconnected
during power-up, the stored EDID will not be
modified.
Product specificaties
| Merk: | SmartAVI |
| Categorie: | Splitter |
| Model: | RK-DVS4P-8S |
Heb je hulp nodig?
Als je hulp nodig hebt met SmartAVI RK-DVS4P-8S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Splitter SmartAVI
9 Juli 2023
2 Juli 2023
29 Juni 2023
28 Juni 2023
Handleiding Splitter
- Splitter Samsung
- Splitter Abus
- Splitter Akasa
- Splitter Aluratek
- Splitter Apc
- Splitter Audio-Technica
- Splitter Audiovox
- Splitter Behringer
- Splitter D-Link
- Splitter Digitus
- Splitter Fujitsu
- Splitter Furuno
- Splitter Hyundai
- Splitter Icy Box
- Splitter Ideal
- Splitter InFocus
- Splitter Konig
- Splitter LevelOne
- Splitter Manhattan
- Splitter Marmitek
- Splitter Mercury
- Splitter Monacor
- Splitter Nedis
- Splitter Newstar
- Splitter Scheppach
- Splitter Simrad
- Splitter Texas
- Splitter Zipper
- Splitter Shure
- Splitter Televรฉs
- Splitter ACG
- Splitter Atlona
- Splitter Sun Joe
- Splitter SIIG
- Splitter Tripp Lite
- Splitter Rane
- Splitter Gefen
- Splitter Lindy
- Splitter Black Box
- Splitter IFM
- Splitter ART
- Splitter ATen
- Splitter AMX
- Splitter Crestron
- Splitter StarTech.com
- Splitter Advantech
- Splitter Smart-AVI
- Splitter Xantech
- Splitter Kramer
- Splitter KanexPro
- Splitter Botex
- Splitter Ecler
- Splitter Rose Electronics
- Splitter Palmer
- Splitter Klover
- Splitter Key Digital
- Splitter Omnitron Systems
- Splitter Rolls
- Splitter WyreStorm
- Splitter MuxLab
- Splitter C2G
- Splitter Club 3D
- Splitter CLUB3D
- Splitter Comprehensive
Nieuwste handleidingen voor Splitter
20 November 2024
20 November 2024
20 November 2024
20 November 2024
20 November 2024
17 November 2024
17 November 2024
17 November 2024
13 November 2024
13 November 2024