Smart-AVI SM-D2H-4Q Handleiding

Smart-AVI Schakelaar SM-D2H-4Q

Lees hieronder de 📖 handleiding in het Nederlandse voor Smart-AVI SM-D2H-4Q (2 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
SM 4Q-D2H-
Quick Star
Quick Star
Quick Star
Quick StarQuick Start Guide
t Guide
t Guide
t Guide t Guide
A full Manual can be downloaded from
www.smartavi.com/SM-D2H-4Q/
Adva
Adva
Adva
AdvaAdvanced KVM Switch
nced KVM Switch
nced KVM Switch
nced KVM Switchnced KVM Switch
TECHNICAL SPECIFICATIONS
VIDEO
Format DisplayPort, HDMI
Maximum Pixel Clock MHz 165
Input Interface DisplayPort (16)
Output Interface (4) HDMI
Resolution 3840 x 2160 @ 30 Hz
DDC 5 volts p-p (TTL)
Input Equalization Automatic
Input Cable Length Up to 20 ft.
Output Cable Length Up to 20 ft.
USB
Signal Type USB 2.0, 1.1, and 1.0 w/ internal
hub
Input Interface (4) USB Type B
Output Interface
(2) USB 1.1 Type A for KVM Devices
(2) USB 2.0 Type A Transparent
AUDIO
Input (4) 3.5 mm Stereo Audio
Output (1) 3.5 mm Stereo Audio
POWER
Power Requirements 12V DC, 3A power adapter with
center-pin positive polarity
ENVIRONMENT
Operating Temp 32° to 104° F (0° to 40° C)
Storage Temp -4° to 140° F (-20° to 60° C)
Humidity 0-80% RH, non-condensing
CONTROL
Front Panel Push Buttons with LED indicators
RS- Via Serial @ 115200 bps 232
Hot Keys Via Keyboard
OTHER
OTHER
OTHER
OTHER OTHER
Emulation Keyboard, Mouse and Video
WHAT’S IN THE BOX
PART NO. QTY DESCRIPTION
SM-D2H- 1 4Q
Quad Head 4-Port DP- -HDMI KVM to
Switch with Audio and USB 2.0
Support
PS12VDC3A 1 12V DC, 3A power adapter with
center-pin positive polarity
1 Quick Start Guide
NOTICE
The information contained in this document is subject
to change without notice. SMARTAVI makes no war-
ranty of any kind with regard to this material, includ-
ing but not limited to, implied warranties of merchant-
ability and fitness for particular purpose. SMARTAVI
will not be liable for errors contained herein or for
incidental or consequential damages in connection
with the furnishing, performance or use of this materi-
al. No part of this document may be photocopied,
reproduced, or translated into another language with-
out prior written consent from SMARTAVI, Inc.
Toll Free: (800) AVI 2123-
Phone: (702) 800 0005-
2455 W. Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
smartavi.com
QUAD H
QUAD H
QUAD H
QUAD HQUAD HEAD 4
EAD 4
EAD 4
EAD 4EAD 4-PORT
-PORT
-PORT
-PORT -PORT
DP to HDMI KVM S
DP to HDMI KVM S
DP to HDMI KVM S
DP to HDMI KVM SDP to HDMI KVM SWIT
WIT
WIT
WITWITCH
CH
CH
CH CH
WITH USB 2.0 SHARING
WITH USB 2.0 SHARING
WITH USB 2.0 SHARING
WITH USB 2.0 SHARING WITH USB 2.0 SHARING
HARDWARE INSTALLATION
1. Ensure that power is turned off or disconnected from the unit and the computers.
2. Use DP cables to connect the DP output ports from each computer to the corresponding
DP IN ports of the unit.
3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the
respective USB ports of the unit.
4. Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of
the computers to the AUDIO IN ports of the unit.
5. Connect monitors to the HDMI OUT console ports of the unit using HDMI cables.
6. Connect a USB keyboard and mouse in the two USB console ports.
7. Optionally connect stereo speakers to the AUDIO OUT port of the unit.
8. Finally, power on the KVM by connecting a 12VDC power supply to the power connector, and
then turn on all the computers.
Note:
Note:
Note:
Note:Note: You can connect up to 4 computers to the 4 port KVM.
EDID LEARN
The KVM is designed to learn a connected
monitor’s EDID upon power up. In the event
of connecting a new monitor to the KVM, a
power re-cycle is required.
SYSTEM CONTROL
There are three ways to control the SM-D2H:
Keyboard HotKeys, RS-232 Serial
Commands, and Front Panel Buttons.
The settings for the serial connection are as
follows: Baud rate: ;
115200
115200
115200
115200115200
Data Bits: ; Parity: ; Stop Bits: ;
8
8
8
88 None
None
None
NoneNone 1
1
1
11
Flow Control: .
None
None
None
NoneNone
Command HotKey RS-232
Switch KVM [CT][CT][#]<CR> // [#]<CR> m
Audio Only [CT][CT] [#]<CR>a // [#]<CR>a
KM Only [CT][CT] [#]<CR>c // [#]<CR>c
USB Only [CT][CT] [#]<CR>u // [#]<CR>u
Learn EDID [CT][CT] <CR>e // <CR>e
SW Reset [CT][CT]r // <CR>r
Status Query N/A // <CR>??
Current HK
Trigger
[Alt][Alt][Alt]
k 0 <CR>
// <CR>hk
Update HK
Trigger
[HK][HK] k
[1|2|3] <CR>
N/A
Chart Key
[CT] = Ctrl
<CR> = Carriage Return (Enter Key)
[HK] = Current Hot Key Trigger
1 = Ctrl (Default) | = Shift | = Scroll Lock2 3


Product specificaties

Merk: Smart-AVI
Categorie: Schakelaar
Model: SM-D2H-4Q

Heb je hulp nodig?

Als je hulp nodig hebt met Smart-AVI SM-D2H-4Q stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Schakelaar Smart-AVI

Handleiding Schakelaar

Nieuwste handleidingen voor Schakelaar