Smart-AVI NET-IP-PROS Handleiding

Smart-AVI Server NET-IP-PROS

Lees hieronder de 📖 handleiding in het Nederlandse voor Smart-AVI NET-IP-PROS (2 pagina's) in de categorie Server. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
USER MANUAL
NET-IP-PRO
CONTROL MOST SMARTAVI MATRIX
SWITCHES FROM ANYWHERE IN
THE WORLD
ETHERNET/RS232
SERVER
INITIAL SETUP FOR NET-IP-PRO
1. Once connected to the NET-IP-PRO, you will see
the following menu of options:
Administration
Device Config
Input/Output Select
Network Settings
Admin Password
Update Firmware
Web Console
Web Telnet
Logout
For the initial setup, click the Network
Network
Network
Network Network Settings
Settings
Settings
SettingsSettings
button and manually assign an IP address to the
NET-IP-PRO. This will assure that the NET-IP-PRO
will always have the same IP address.
Note: Be sure to choose an address that will not
conflict with any other devices on the network, and
that the address is not in the range of the DHCP
server.
2. Once you have manually assigned an IP address,
the NET-IP-PRO must be restarted before it will be
accessible at that IP address.
4. It is also recommended that you set a password
for the NET-IP-PRO at this point. To change the
password (and/or username) of the web interface,
click on the button. Enter the
Admin
Admin
Admin
Admin Admin Password
Password
Password
PasswordPassword
new password and click . This sets theSubmit
password for the HTTP interface only.
5. After the password has been changed, the system
will automatically log the user out, so be ready to
enter your new password soon after changing it if
you want to access the system.
800.AVI.2131
Tel: (818) 503-6200 Fax: (818) 503-6208
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
Designed and Manufactured in the USA
NET-IP-PRO has been tested with the
Chrome and Firefox web-browsers.
Internet Explorer is not supported.
Internet Explorer is not supported.
Internet Explorer is not supported.
Internet Explorer is not supported.Internet Explorer is not supported.
NOTICE
The information contained in this document is subject
to change without notice. SmartAVI makes no warranty
of any kind with regard to this material, including but
not limited to, implied warranties of merchantability
and fitness for particular purpose.
SmartAVI will not be liable for errors contained herein
or for incidental or consequential damages in connec-
tion with the furnishing, performance or use of this
material.
No part of this document may be photocopied, repro-
duced, or translated into another language without
prior written consent from SmartAVI Technologies, Inc.
INTRODUCTION
The NET-IP-PRO is an RS-232 control module that
allows most SmartAVI switching matrixes to be con-
trolled remotely via HTTP or TELNET. Manage the
switching functions of your matrix with ease from
anywhere in the world. With the NET-IP-PRO you can
save up to 10 preset input/output configurations for
easy access. TELNET access provides transparent
command control of your matrix, perfect for use with
automated third-party control software.
FEATURES
฀Supports HTTP and TELNET control
฀10/100 Ethernet Interface
฀Up to 10 user-definable configurations
฀Password Protected
฀Up to 5 Users can Control the Matrixes
฀IP Configuration via TCP/IP and RS-232
฀Flexible control of several types of matrixes
APPLICATIONS
฀Server Collocation
฀Digital Signage
฀Airports
฀Dealer Rooms
฀Control Rooms
฀Audio/Visual Presentations
฀Hotels/Resorts
WHAT’S IN THE BOX?
1. Power off all devices.
2.
Using a CAT5 cable, connect the NET -IP-PRO to your local network.
3. Connect your SmartAVI device using the included RS-232 male-to-male cable.
4. Plug the power into the NET-IP-PRO.
5. After applying power, wait for about 30 seconds then run one of the discovery tool applications
(mentioned below) to connect to the NET-IP-PRO web interface or telnet application.
The first discovery tool, called , will open up a small console application that will display the IPdetect
address of the NET-IP-PRO. After obtaining the IP address connect to the device with the web applica-
tion of your choice by typing that IP address in the web browser or connect through telnet on port 23.
An alternative option is to use . This program will find the IP address of the NET-IP-PRO anddetect_gui
then open up a web browser to the NET-IP-PRO web interface.
6. Open a web browser and navigate to the IP address that is indicated. You will be prompted to enter a
username and password.
7. To access the web interface of NET-IP-PRO, log in with the following information:
User ID: admin
Password: admin
INSTALLATION DIAGRAM
PART NO. QTY. DESCRIPTION
NET-IP-PRO 1 NET-IP-PRO Device
PS5VDC2A 1 5VDC2A Power Supply
CCRS232MM06 1 Serial male to male cable
CONNECTING THE NET-IP-PRO

Product specificaties

Merk: Smart-AVI
Categorie: Server
Model: NET-IP-PROS

Heb je hulp nodig?

Als je hulp nodig hebt met Smart-AVI NET-IP-PROS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Server Smart-AVI

Smart-AVI

Smart-AVI NET-IP-PROS Handleiding

20 November 2024
Smart-AVI

Smart-AVI E300 Handleiding

12 Maart 2024

Handleiding Server

Nieuwste handleidingen voor Server

MSI

MSI N1000a Handleiding

18 December 2024
MSI

MSI N5010 Handleiding

18 December 2024
Asus

Asus TS700-E6/RS8 Handleiding

9 December 2024
Apc

Apc AP8653 Handleiding

7 December 2024
Dell

Dell NX430 Handleiding

3 December 2024
Dell

Dell PowerEdge C6300 Handleiding

3 December 2024
Dell

Dell EMC PowerEdge T150 Handleiding

3 December 2024
Apc

Apc RBC55 Handleiding

2 December 2024
Digitus

Digitus DN-170108 Handleiding

1 December 2024
Gigabyte

Gigabyte TO24-JD0 Handleiding

1 December 2024