Skytec SMW18 Handleiding

Skytec Subwoofer SMW18

Lees hieronder de 📖 handleiding in het Nederlandse voor Skytec SMW18 (13 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

SMW E SERI

SUBWOOFER

INSTRUCTION MANUAL

HANDLEIDING

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

2 - 13

Basis aansluiting /Basic connections / Connexions de base / Grundanschlüsse:

Bi Amp connection Branchement bi-amplié / Doppelverstärkeranschluss: /

Cable Connector / Aansluitingen / Connecteur de câble / Kabelverbinder / Conector del cable :

Regulatory Requirement:

EN 55013

EN 55020

EN 61000-3- -3-3 2/

3 - 13

Congratulations to the purchase of our SkyTec subwoofer.

Read the instructions thoroughly prior to using the unit.

SAFETY INSTRUCTIO NS

 Hearing damage:

SkyTec loudspeakers are easily generating high

sound pressure levels (SPL) suicient to cause

permanent hearing damage to performers,

production crew and audience members. Ca re

should be taken to avoid prolonged exposure to

SPL in excess of . 85 dB

 Make sure that the amplier is switched o

when the speaker box is connected or

disconnected.

 The box must be installed by a qualied

technician who has knowledge of the

techniques .

 Do not overload the box to avoid damage to the

speakers.

 Connect the box only to a good quality

amplier:

Direct voltage at the amplier output will

damage the speakers

“Clipping” (overdrive) of the amplifier can

damage the woofer, tweeter and horn speaker

 Do not overload the speakers to avoid damage

to the components.

 Do not place an open fire (candle, etc.) on top

or next to the box - FIRE HAZARD

 For indoor use only. If the box is used outdoors,

you need to make sure that no humidity can

enter the box.

 Make sure that the box is placed on a stable,

solid surface.

 The boxes can be stacked but do not put more

than 60kg weight on the box.

 The boxes can be hung. Use only strong and

approved mounting material. The installation

should only be carried out by a qualied

technician who has knowledge of the

techniques and regulations regarding the

mounting/hanging of speaker boxes. During the

mounting, make sure that nobody is standing

below the mounting area.

 Use only stands which are designed to support

the weight of the speaker. Do not attempt to

place more than one speaker on a stand

designed for a single speaker.

 Do not place liquids on the box and protect it

against humidity. Humidity can shorten the life

time considerably.

 Only use suitable means of transportation if you

want to move the box BEWARE OF YOUR –

BACK!!

 If the unit is damaged to an extent that internal

parts are visible, DO NOT connect the unit and

DO NOT switch it on. Contact your dealer or

Tronios .

 Never try to repair the unit yourself. It does not

contain any user serviceable parts. All repairs

must be carried out by a qualied technician.

 Set the amplier to the lowest volume prior to

switching it on.

 Keep the unit out of the reach of children.

Protect your environment. Recycle packing material

whenever possible.

Do not throw a faulty unit into normal

household waste but bring it to a special

collection point. A large part of it can be

recycled.

CONNECTIONS:

First of all, check the specications of the amplier if it is suitable for your speaker boxes. Pay particular

attention to the power rating and impedance. Check if the amplier is switched o. If yes, you can switch on the

speakers. PLEASE NOTE! Watch the polarity (+/-). Wires of the same colour must be connected to the same

sign of every side i.e. the + of the amplier must be connected to the + of the speaker box. If the connections

are inverted, the sound quality will diminish.Only use high quality speaker cables that are suitable for the power

and distance between the amplier and the speaker.

Connection of several speakers:

A subwoofer is specially designed to reproduce the low frequencies (basses) and not the whole frequency

range. If you want to reproduce the full frequency range, you need to use this subwoofer in combination with a

full range speaker box such as the SM10.

The connections can be made in two ways: 1 amplier for 4 speakers. 2 ampliers one for the subwoofer –

(mono/bridged) and one for the (stereo) box. (See g.). If a second speaker is connected in parallel (see g.),

the impedance of 8 Ohms will reduce to 4 Ohms. Please check if your amplier can handle this. If more than

two speakers are connected in parallel, the impedance will fall below 4 Ohms. Most of the ampliers are not

suitable for this!

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would

also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or

Product specificaties

Merk:	Skytec
Categorie:	Subwoofer
Model:	SMW18

Heb je hulp nodig?

Als je hulp nodig hebt met Skytec SMW18 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Subwoofer Skytec

Skytec SMWBA15 Handleiding

7 Juni 2023

Skytec SMW18 Handleiding

5 Juni 2023

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

Deaf Bonce Apocalypse ASA-4000.1 Handleiding

20 November 2024

Deaf Bonce Apocalypse Atom 2000 PRO Handleiding

20 November 2024

JBL PSW-D115 Handleiding

20 November 2024

JBL PSW-D110 Handleiding

20 November 2024

JBL PSW-D112 Handleiding

20 November 2024

JBL Power P1224 Handleiding

20 November 2024

JBL Power P1220D II Handleiding

20 November 2024

JBL Power P1242 Handleiding

20 November 2024

JBL Power P1220 II Handleiding

20 November 2024

JBL Power P1020 II Handleiding

20 November 2024