Singer HD6800C Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Singer HD6800C (44 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/44
INSTRUCTION MANUAL
HD 6800C • HD 6805C
This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed, including the
following:
Read all instructions before using this household sewing machine. Keep the instructions at a suitable place
close to the machine. Make sure to hand them over if the machine is given to a third party.
DANGER –TO REDUCE THE RISK OF ELECTRIC SHOCK:
A sewing machine should never be left unattended when plugged in. The electrical socket, to which the
machine is plugged in should be easily accessible. Always unplug this sewing machine from the electric
outlet immediately after using and before cleaning, removing covers, lubricating or when making any other
user servicing adjustments mentioned in the instruction manual.
WARNING –TO REDUCE THE RISK OF BURNS, FIRE,
ELECTRIC SHOCK, OR INJURY TO PERSON:
Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near
children.
Use this sewing machine only for its intended use as described in this manual. Use only attachments
recommended by the manufacturer as contained in this manual.
Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized
dealer or service center for examination, repair, electrical or mechanical adjustment.
Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing
machine and foot control free from the accumulation of lint, dust, and loose cloth.
Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
Always use the proper needle plate. The wrong plate can cause the needle to break.
Do not use bent needles.
Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
Wear safety glasses.
Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as threading
needle, changing needle, threading bobbin, or changing presser foot, etc.
Never drop or insert any object into any opening.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is being administrated.
To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
The foot control is used to operate the machine. Never place other objects on the foot control.
Do not use the machine if it is wet.
If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service agent or a
similarly qualified person, in order to avoid a hazard.
If the cord connected with the foot control is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person, in order to avoid a hazard.
This sewing machine is provided with double insulation. Use only identical replacement parts. See
instructions for Servicing of Double-Insulated Appliances.
SAVE THESE INSTRUCTIONS
FOR CENELEC COUNTRIES ONLY:
This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
The noise level under normal operating conditions is less than 80 dB.
The machine must only be used with foot control of type C-8000 manufactured by Zeng Hsing, Taiwan.
FOR NON CENELEC COUNTRIES:
This sewing machine is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the sewing machine by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the sewing machine.
The noise level under normal operating conditions is less than 80 dB.
The machine must only be used with foot control of type C-8000 manufactured by Zeng Hsing, Taiwan.
SERVICING OF DOUBLE INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding. No ground means
is provided on a double-insulated product, nor should a means for grounding be added to the product.
Servicing of a double-insulated product requires extreme care and knowledge of the system and should be
done only by qualified service personnel. Replacement parts for a double-insulated product must be identical
to those parts in the product. A double-insulated product is marked with the words ‘DOUBLE INSULATION
or ‘DOUBLE INSULATED’.


Product specificaties

Merk: Singer
Categorie: Naaimachine
Model: HD6800C

Heb je hulp nodig?

Als je hulp nodig hebt met Singer HD6800C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Singer

Singer

Singer M1005 Handleiding

14 November 2024
Singer

Singer HD6330M Handleiding

14 November 2024
Singer

Singer 3333 Handleiding

14 November 2024
Singer

Singer HD6335M Handleiding

25 Oktober 2024
Singer

Singer SO235 Handleiding

25 April 2024
Singer

Singer M1255 Handleiding

25 April 2024
Singer

Singer M3305 Handleiding

11 Februari 2024

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine