Singer C5630 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Singer C5630 (40 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40
INSTRUCTION MANUAL
C5600 / C5605 / C5630 / C5635
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this household sewing machine.
When using an electrical appliance, basic safety precautions should always be followed, including the
following:
Keep the instructions at a suitable place close to the machine. Make sure to hand them over if the machine is
given to a third party.
This appliance is intended for use by adults. The appliance can be used with adult supervision by (i) children
aged from 8 to 12 years and (ii) persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given instruction concerning use of the appliance in a safe way
and understand the hazards involved. Cleaning and user maintenance shall not be made by children without
supervision. It is not allowed for anyone to play with the machine. Children up to 8 years are not allowed to use
the machine.
WARNINGTO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSON:
A sewing machine should never be left unattended when plugged in. The electrical socket, to which the
machine is plugged in should be easily accessible. Always unplug this sewing machine from the electric
outlet immediately after using and before cleaning, removing covers, lubricating or when making any other
user servicing adjustments mentioned in the instruction manual.
Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near
children.
Use this sewing machine only for its intended use as described in this manual. Use only attachments
recommended by the manufacturer as contained in this manual.
Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer
or service center for examination, repair, electrical or mechanical adjustment.
Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing
machine and foot control free from the accumulation of lint, dust, and loose cloth.
Keep ngers away from all moving parts. Special care is required around the sewing machine needle.
Always use the proper needle plate. The wrong plate can cause the needle to break.
Do not use bent needles.
Do not pull or push fabric while stitching. It may deect the needle causing it to break.
Wear safety glasses.
Switch the sewing machine o (“0”) when making any adjustment in the needle area, such as threading
needle, changing needle, threading bobbin, or changing presser foot, etc.
Never drop or insert any object into any opening.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is being administrated.
To disconnect, turn all controls to the o (“0”) position, then remove plug from outlet.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
The foot control is used to operate the machine. Never place other objects on the foot control.
Do not use the machine if it is wet.
If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service agent or a
similarly qualied person, in order to avoid a hazard.
If the cord connected with the foot control is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualied person, in order to avoid a hazard.
The machine must only be used with foot control of type JF-1000 manufactured by Jaguar International
Corporation or YC-485EC manufactured by Taiwan Yamamoto Electric Corp.
SAVE THESE INSTRUCTIONS
SERVICING OF DOUBLE INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding. No ground means
is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing
of a double-insulated product requires extreme care and knowledge of the system and should be done only by
qualied service personnel. Replacement parts for a double-insulated product must be identical to those parts
in the product. A double-insulated product is marked with the words ‘DOUBLE INSULATION’ or ‘DOUBLE
INSULATED’.


Product specificaties

Merk: Singer
Categorie: Naaimachine
Model: C5630

Heb je hulp nodig?

Als je hulp nodig hebt met Singer C5630 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Singer

Singer

Singer M1005 Handleiding

14 November 2024
Singer

Singer HD6330M Handleiding

14 November 2024
Singer

Singer 3333 Handleiding

14 November 2024
Singer

Singer HD6335M Handleiding

25 Oktober 2024
Singer

Singer SO235 Handleiding

25 April 2024
Singer

Singer M1255 Handleiding

25 April 2024
Singer

Singer M3305 Handleiding

11 Februari 2024

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine