Silent Knight SD500-PSDA Handleiding

Silent Knight Niet gecategoriseerd SD500-PSDA

Lees hieronder de 📖 handleiding in het Nederlandse voor Silent Knight SD500-PSDA (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

P/N 151177

SD500-PS/SD500-PSDA

Addressable Fire Pull Station

Installation Instruction

The SD500-PS/PSDA is an addressable fire pull

station. The SD500-PS/PSDA is a normally

open initiating point compatible with Silent

Knight Addressable control panels. The SD500-

PS/PSDA is designed for indoor use in non-

explosive environments. Used to activate a non-

coded alarm instantly.

An on-board status LED is visible from the front

of the pull station. The LED flashes to indicate

proper communication with the FACP

(approximately every 30 seconds).

Specifications

Operation

To activate the fire pull station:

1. Grab the top of the pull station where it is

labeled “PULL”.

2. Pull the cover plate out and down.

To reset the pull station:

1. Insert key into the lock.

2. Turn the key clockwise.

3. Close the cover plate.

4. Turn the key counter clockwise.

Wiring to the SD500-PS/PSDA

Wire the SD500-PS as shown in Figure 1.

Figure 1: Fire Pull Station Wiring

Mounting the SD500-PS/PSDA

The pull station mounts to a standard single gang

electrical switch box or a surface mount back

box P/N PS-SMBB (sold separately). See Figure

Parameter Rating

Max. Line resistance 50Ω

Max. Alarm

Current

One device in

alarm 23mA. 46

mA for two

devices in alarm.

.5 mA for each

additional device in

alarm.

Max. Voltage 33 V

Operating Temperature 0° to 49° C

(32° to 120° F)

Dimensions 5-1/8” H x 3-1/16” W x 1.5” D

Supervised

Power Limited

Product specificaties

Merk:	Silent Knight
Categorie:	Niet gecategoriseerd
Model:	SD500-PSDA
Kleur van het product:	Red, White
Breedte:	77.78 mm
Diepte:	38.1 mm
Hoogte:	130.17 mm
Type stroombron:	DC
Certificering:	UL, CSFM, ADA
Ingangsspanning:	24 V
Bedrijfstemperatuur (T-T):	0 - 49 °C