Signature Hardware Bullens 433108 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Signature Hardware Bullens 433108 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
1Bullens Kitchen Faucet Installation Instructions
INSTALLATION
BULLENS KITCHEN FAUCET INSTALLATION
GETTING STARTED
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing plumbing fixtures. Signature
Hardware accepts no liability for any damage to the
faucet, plumbing, sink, counter top, or for personal injury
during installation.
Observe all local plumbing and building codes.
Unpack and inspect the faucet for shipping damage. If
any damage is found, contact our Customer Relations
team at 1- -855-715 1800.
Note: Make sure to winterize your outdoor faucet
before cold weather arrives to prevent burst pipes and
protect the faucet’s hardware.
Ensure that you have gathered all the required
materials that are needed for the installation.
For these instructions, it is assumed that the old
faucet has been completely removed and any
necessary repairs or modifications to the water
supply have been completed.
*not included
TOOLS AND MATERIALS:
Plumbers
Tape*
Thread
Sealant*
Adjustable
Wrench*
Small
Bucket*
Basin
Wrench*
2. Attach the mounting posts and water lines to the
base of the faucet. Apply plumbers tape or thread
sealant to the threads of the water lines before attach-
ing.
1. Ensure that the water supply below your sink is
completely shut off by turning the shutoff valves all the
way to the right.
Tip: Place a small bucket below your workspace to
catch any water that may drip during the installation
process.
OFF
SKU(s): 433108, 433134
1.855.715.1800
Bullens Kitchen Faucet Installation Instructions
BULLENS KITCHEN FAUCET INSTALLATION
2
5. Once installation is complete, turn the main water
supply back on from underneath your sink. Check for
any leaks underneath.
6. Remove the aerator from the spout. Turn the faucet
on and allow the water to flow for approximately 60
seconds. Ensure that there are no leaks, and that both
hot and cold water are running properly. Divert water to
the sprayer setting and allow it to flow for another 60
seconds.
3. Insert the faucet into its mounting hole. From
beneath the sink, slide the metal mounting bracket
onto the mounting posts. Thread the lock nuts onto
the mounting posts to secure the faucet to the
surface. Tighten firmly with an adjustable wrench.
Note: For thin mounting surfaces, use the provided
plastic support. The support should slide on first,
before the mounting bracket.
4. Apply plumber’s tape or thread sealant to the
threading on each of the faucet’s water lines, and
connect the main water hoses to the faucet. Ensure
that you are connecting the hot and cold lines appro-
priately.
ON
1.855.715.1800


Product specificaties

Merk: Signature Hardware
Categorie: Niet gecategoriseerd
Model: Bullens 433108

Heb je hulp nodig?

Als je hulp nodig hebt met Signature Hardware Bullens 433108 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Signature Hardware

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd