Sightron S6 5-30x56 Handleiding

Sightron Niet gecategoriseerd S6 5-30x56

Lees hieronder de 📖 handleiding in het Nederlandse voor Sightron S6 5-30x56 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Introduction to Sightron

Your New S6 Riflescope

Focusing your Riflescope

S6 5-30x56 SERIES

RIFLESCOPE

INSTRUCTIONS

Congratulations on the purchase of your new

Sightron S6 Series Riflescope.

Sightron is a leader in developing new products

for the outdoor enthusiast.

This instruction sheet is designed to provide you

with the proper fundamentals for using your

S6 Series Riflescope.

If you have any questions, please feel free to

www.sightron.com, or by phone at

+1-919-562-3000.

Before mounting your new Sightron S6 5-30x56

Series

Scope please check to make sure it is the

correct

model and includes the following

accessories:

1-Set of Front and Rear Lens Covers

1-Three-inch Sunshade

1-1.27 MM Allen wrench

1-2.0 MM Allen wrench

1-Lens Cloth

1-Instruction Sheet

1-CR2032 Battery for the illumination Switch

1- Reticle Chart

Mounting Your Riflescope

Your new scope has been optically centered at the

factory and superior performance will be obtained

with minimal adjustment.

Prior to sighting in your scope it is important to

know the windage and elevation adjustment

specifications of your particular scope model.

A general rule is the more the magnification the

less internal adjustment is available.

Once you have completed the eyepiece / diopter

adjustment, the next step is to turn the side focus

knob on the left side of the scope until the image

or target is clear. Now your scope is adjusted and

ready for shooting.

Note: The focus will need to be adjusted each

time the distance is changed.

Sighting in Your Gun

1. Place a 2 to 3 foot target at 50 to 100 yards

away. Using a bench rest, fire two shots while

aiming at the center of the bullseye.

While re-aiming at the bullseye adjust the reticle

to the bullets impact point by using the turret

adjustments and fire two more shots.

Your scope should now be close to point of aim.

Fire at the bullseye and make the necessary

final adjustments.

4. Adjusting the windage and elevation turret in

the direction of the arrow on the knob, it will

move the bullet impact in the direction indicated.

5. For best optical and mechanical performance

keep the windage and elevation travel as

centered as possible to allow for maximum

adjustment range for your model of riflescope.

Note: Most sight in problems are caused by

poor ring alignment.

Using your Illumination Reticle

To install the illumination battery, remove the

battery cap located at the end of the side focus

knob by rotating it counterclockwise.

Insert the CR2032 battery with the positive side

up and retighten finger tight.

Rotate the illumination switch to the required

setting for the lighting conditions.

Using your Internal Zero Stop

NOTE: The zero stop comes from the factory

set at the full range of elevation travel.

1. To set the zero stop, sight in the gun at the

desired range.

2. Loosen the three 2.0 MM hex screws from

the elevation turret and remove the turret.

3. Loosen the 1.27 MM hex screw on the Zero

Stop collar until it is loose.

4. The Zero Stop collar will then drop to meet

the main turret body.Turn the Zero Stop

clock wise until it stops.

5. Retighten the 1.27MM hex screw.

6. Retighten the three 2.0 MM hex screws on

elevation turret.

Once your scope is sighted in for the required

distance, loosen the three 2.0 MM hex screws.

Rotate the turret so the zero on the turret aligns

with vertical index mark on the revolution scale.

Retighten the three 2.0 MM hex screws.

Fi t Shotrs First Adjustment

Adjust

reticle

to this

point

Battery Cap (CR2032)

Illumination Switch

Side Focus Knob

Resetting your Windage and

Elevation Turrets

Full Travel

Position

Zero Stop Collar

Zero Stop

Locked Position

Ocu ar Lel ns

Di pt justi Rio er Ad ng ng

Elevation Adjusting Knob

Windage

Adj

Zoom Ring Lever

(Removeable)

Ba ry C 2 2)tte ap (CR 03

Parallax and Illumination

Adjusting Knob

Objective Lens

CAUTION: ALWAYS ENSURE YOUR

WEAPON IS UNLOADED PRIOR TO MOUNTING

YOUR SCOPE.

USE EYE AND HEARING PROTECTION AND

FOLLOW PROPER SAFETY RULES WHEN

HANDLING OR FIRING YOUR WEAPON.

Place both rings on your mount base or receiver,

and tighten. Remove the top half of the rings

and place the riflescope in the bottom half of

the rings.

Once you have determined proper ring spacing

and eye relief, align the reticle with a vertical

line preferably a plumb line.

Tighten the top half of the rings to between

15 to 18 inch pounds or 169 to 203 Newton

Centimeters and adjust the

diopter or eye piece

focus so the reticle is crisp

and clear.

Note: The only purpose of the diopter is to focus

the reticle sharp and clear.

Maintaining Your Scope Lenses

Sightron Riflescope lenses are Fully Multi-Coated

and are engineered for a lifetime of performance.

Lenses should be cleaned regularly to ensure

optimal performance during the life of the

riflescope.

By using a lens cleaning kit, first brush all loose

dust and dirt particles with a lens brush.

Using a camera lens grade cleaner and lens

cloth carefully clean the lenses.

Adjustment Dials

All Sightron S6 riflescopes external

adjustments operate in a sealed system that

requires no additional maintenance or

lubrication.

Sightron riflescopes use the latest technology

that ensures each model riflescope is 100%

waterproof.

Sightron is certain our riflescopes, binoculars and

spotting scopes will line up to your high expecta-

tions and never let you down.

The Sightron “Limited Lifetime USA Warranty”

covers all Sightron products sold and shipped

within the 50 States of the United States.

Should your Sightron product ever fail due to

workmanship or materials simply return it to

Sightron and we will repair or replace it at our

option. “See Exclusion Below”

This warranty does not cover damage that occurs

in shipment or failures that result from accidents,

misuse, abuse, unauthorized alterations, theft,

modifications or acts of God.

Note: Products shipped from the USA out of the

Country are considered gray market products

and are not covered by this warranty.

Please return your Sightron product to: Sightron,

Inc. 100 Jeffrey Way, Suite A, Youngsville, NC

27596. Include a detailed letter with the issues

you are experiencing along with return address

and complete contact information.

If you have any questions please contact us at:

1-919-562-3000 or at info@sightron.com

Sightron Warranty Exclusion:

Sightron Electronic Components Warranty-Two

Years

Riflescope Exterior

All Sightron riflescope models are made from

high quality aircraft aluminum.

The hard coated anodizing allows the shooter

worry free maintenance for a lifetime of

enjoyment.

To clean the main body tube, simply wipe off

any dirt particles using a moist clean cloth

(use water only).

Troubleshooting Tips

Please check the following items before

returning your riflescope for warranty repair.

1. Check the elevation and windage travel to

make sure that it is not past the allotted

specification for the model riflescope.

2. Make sure the rings are torqued to the

required specification provided by Sightron.

3. Check the diopter setting to make sure that

it is properly adjusted for your eye.

4. Please contact a Sightron technical

specialist for all other questions concerning

your model riflescope.

SIGHTRON USA LIMITED

LIFETIME WARRANTY

Sightron is certain our riflescopes, binoculars and

spotting scopes will line up to your high expecta-

tions and never let you down.

The Sightron “Limited Lifetime International

Warranty” covers all Sightron products sold

outside the 50 States of the United States. “See

Exclusion below”.

This warranty does not cover damage that occurs

in shipment or failures that result from accidents,

misuse, abuse, unauthorized alterations, theft,

modifications or acts of God.

Should your Sightron product ever fail due to

workmanship or materials simply return it to the

Sightron distributor from the country it was

purchased along with a copy of the sales receipt

and we will repair or replace it at our option.

If you are not sure of the distributor for your country

or region please email us at info@sightron.com

or contact us in the U.S.A. +1-919-562-3000.

Due to the changing requirements by the U.S.

Department of Commerce it is important to let

your distributor return your scope for repair as

they are aware of the proper importation and

exportation regulations for your country.

Scopes sent directly to Sightron U.S.A. from

outside the U.S.A. will not be accepted unless a

prior RMA is authorized.

Sightron Warranty Exclusion:

Sightron Electronic Components Warranty-Two

Years

SIGHTRON INTERNATIONAL

WARRANTY

SIGHTRON, INC.

100 Jeffrey Way, Suite A Youngsville,

NC 27596, USA

TEL : +1-919-562-3000

+1-800-867-7512

FAX : +1-919-562-7129

Ver. 5-2022

Product specificaties

Merk:	Sightron
Categorie:	Niet gecategoriseerd
Model:	S6 5-30x56

Heb je hulp nodig?

Als je hulp nodig hebt met Sightron S6 5-30x56 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Sightron

Sightron S6 5-30x56 Handleiding

2 April 2025

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vimar EZS20 Handleiding

2 April 2025

Vimar R288 Handleiding

2 April 2025

Vimar EZP20 Handleiding

2 April 2025

Vimar EZS25 Handleiding

2 April 2025

Sloan SS-3065 Handleiding

2 April 2025

Sloan G2 Optima Plus Handleiding

2 April 2025

Ergotron WorkFit Elevate Handleiding

2 April 2025

Ergotron Tablet Management Desktop 16 Handleiding

2 April 2025

Ergotron MVBD60SSBK Handleiding

2 April 2025

Ergotron DM40-1009-4 Handleiding

2 April 2025