Shimano BB-7700 Handleiding
Shimano
Fietsaccessoire
BB-7700
Lees hieronder de 📖 handleiding in het Nederlandse voor Shimano BB-7700 (2 pagina's) in de categorie Fietsaccessoire. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Bottom Bracket
BB-7700
BB-7703
Before use, read these instructions carefully, and follow them for
correct use.
BB-7700
Shell width
Bottom Bracket
109.5mm
Spindle length
BB-7703
118.5mm
SERVICE INSTRUCTIONS
SI-1TG0H-001
Note
* Check that the fixing bolt of the bottom bracket cable
guide is not so long that it touches the inner cover. If the
fixing bolt touches the inner cover, it may damage the
inner cover, which will result in a drop in waterproofing
performance.
* Apply grease to the R.H. adapter and L.H. adapter before
installing them to the hanger.
* Apply grease to the surface which contacts the crank arm
before installing the crank arm.
* For maximum performance we highly recommend
Shimano lubricants and maintenance products.
Installation of the Bottom Bracket (BB-7700)
1. Insert the main unit into the
hanger. After checking that
the inner cover is securely
attached to the R.H. adapter,
place them onto the hanger.
2. Tighten the right-hand adapter
by turning it counterclockwise
using the special tool (TL-FC31).
(clockwise for 70 mm [M36]
bottom brackets)
Tightening torque:
50 - 70 Nm
{435 - 608 in. lbs.}
Inner cover
R.H. adapter
3. Use the special tool (TL-UN74-S)
to tighten the left-hand adapter
clockwise until the spindle
turning effort increases sharply.
After tightening the left-hand
adapter, loosen it by about 1/16
to 1/8 of a turn so that the
spindle rotates smoothly.
5. Apply grease to the seal guards and then attach the seal
guards to the spindle, while making sure that the grooves of
the seal rings face inward. If the grooves face outward
after the seal rings are installed, the water-tightness
will drop significantly. (The seal guards are
pushed into the proper
positions when the crank
arms are installed, so do
not force the seal rings on
when installing them.)
6. Install the right-hand crank arm, and then check that there is
no play in the bearing cone is adjusted correctly. If there is
some play in the bearing cone, loosen the lock ring and then
tighten the left-hand adapter by as little as possible. Repeat
steps 4 and 6 until there is no more play.
4. Use the special tool (TL-FC31) to tighten the lock ring while
using the special tool (TL-UN74-S) to push in the left-hand
adapter.
Left Right
Seal guard Seal guard
Grease
Maintenance
●Apply grease to each part at periodic intervals. (Refer to the illustration.)
●Water can get inside the bottom bracket. If using a frame which does
not have water drainage holes in the hanger, be sure to drain any water
which has collected inside the hanger before removing the bottom
bracket.
Please note: specifications are subject to change for improvement without notice. (English)
© Nov. 2007 by Shimano Inc. XBC SZK Printed in Singapore
Groove
TL-FC31
R.H. adapter
TL-UN74-S
Lock ring
TL-FC31
Tightening torque:
50 - 70 Nm {435 - 608 in. lbs.}
Specifications
• Obtain and read the service instructions carefully
prior to installing the parts. Loose, worn, or damaged
parts may cause injury to the rider. We strongly
recommend only using genuine Shimano
replacement parts.
WARNING
SEALED
CARTRIDGE UNIT
BB-7700
JAPAN VIA
109.5
R
L
J
A
A
P
N
B
C
1
.
3
7
68
BB
-
77
00
LR
Apply grease
Inner cover
1. Use the special tool (TL-UN74-
S) to install the bottom
bracket. First install the main
body (clockwise for 70 mm
[M36] bottom brackets), then
the adapter.
Installation of the Bottom Bracket
(BB-7703)
Left
Bottom bracket
Right
Apply grease to
the bottom bracket
before installing it.
Adapter/bottom bracket
tightening torque:
50 - 70 Nm {435 - 608 in. lbs.}
TL-UN74-S
Lock ring
Left-hand adapter
68mm (BC1.37), 70mm (M36)
Product specificaties
| Merk: | Shimano |
| Categorie: | Fietsaccessoire |
| Model: | BB-7700 |
Heb je hulp nodig?
Als je hulp nodig hebt met Shimano BB-7700 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Fietsaccessoire Shimano
15 November 2024
15 November 2024
12 Juni 2023
9 Juni 2023
8 Juni 2023
6 Juni 2023
4 Juni 2023
23 Mei 2023
22 Mei 2023
21 Mei 2023
Handleiding Fietsaccessoire
- Fietsaccessoire Garmin
- Fietsaccessoire Abus
- Fietsaccessoire Axa
- Fietsaccessoire Bobike
- Fietsaccessoire Bontrager
- Fietsaccessoire Dnt
- Fietsaccessoire Eufab
- Fietsaccessoire Fiamma
- Fietsaccessoire Giant
- Fietsaccessoire Hema
- Fietsaccessoire Knog
- Fietsaccessoire Master Lock
- Fietsaccessoire Nedis
- Fietsaccessoire Powerfix
- Fietsaccessoire Prophete
- Fietsaccessoire SECURITY Plus
- Fietsaccessoire Silverline
- Fietsaccessoire Stanley
- Fietsaccessoire Tacx
- Fietsaccessoire Thule
- Fietsaccessoire Trelock
- Fietsaccessoire Crivit
- Fietsaccessoire Kayoba
- Fietsaccessoire Stoy
- Fietsaccessoire Blackburn
- Fietsaccessoire Lezyne
- Fietsaccessoire Topeak
- Fietsaccessoire Vaude
- Fietsaccessoire Spokey
- Fietsaccessoire Evoc
- Fietsaccessoire Polisport
- Fietsaccessoire Ergon
- Fietsaccessoire SKS
- Fietsaccessoire SBS
- Fietsaccessoire Basil
- Fietsaccessoire Valk
- Fietsaccessoire MET Helmets
- Fietsaccessoire IXS
- Fietsaccessoire Park Tool
- Fietsaccessoire MOTO
- Fietsaccessoire Kemo
- Fietsaccessoire KLICKfix
- Fietsaccessoire AARON
- Fietsaccessoire Pletscher
- Fietsaccessoire Funn
Nieuwste handleidingen voor Fietsaccessoire
26 September 2024
18 Augustus 2024
30 Juli 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024
4 Mei 2024
3 Mei 2024
5 Maart 2024
5 Maart 2024