Shelly Plus 1 Handleiding
Shelly
Smarth home
Plus 1
Lees hieronder de š handleiding in het Nederlandse voor Shelly Plus 1 (4 pagina's) in de categorie Smarth home. Deze handleiding was nuttig voor 445 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
SHELLY MOBILE APPLICATION
FOR
Introduction
ā RECOMMENDATION! This user guide is subjective to ad-
justments. For the latest version, please visit:
https://shelly.cloud/knowledge-base/devices/shelly-plus-1/
Shelly devices can be controlled and managed directly on the
local network or by using the Shelly cloud service accessible
via the Internet.
Download the Shelly Cloud Application by scanning the QR
code above, or access the devices through the Embedded
web interface, explained further down in the user guide.
Shelly devices are compatible with Amazon Echo and Google
Home supported functionalities, as well as other home auto-
mation platforms and voice assistants. See details at
https://shelly.cloud/compatibility/.
Registration
The ī¼rst time you load the Shelly Cloud mobile app, you have
to create an account which can manage all your Shelly devic-
es. You need to use an actual e-mail because that e-mail will
be used in case of Š° forgotten password!
Forgotten Password
In case you forget or lose your password, click the āForgot
Password?ā link on the login screen and type the e-mail you
used in your registration. You will receive an e-mail with Š°
link to Š° page where you can reset your password. The link is
unique and can be used only once.
ā ATTENTION! If you are unable to reset your password, you
have to reset your device (as explained in āDevice Inclusionā
section, Step 1).
First steps
After registering, create your ī¼rst room (or rooms), where
you are going to add and use your Shelly devices. Shelly
Cloud allows you to create scenes for automatic control of
devices at predeī¼ned hours or based on other parameters
like temperature, humidity, light, etc. (with available sensors
in Shelly Cloud). Shelly Cloud allows easy control and moni-
toring using a mobile phone, tablet, or PC. Shelly Plus 1 can
be grouped with other devices in the application. It can also
be set to trigger actions on other Shelly devices by set param-
eters. We also allow setting parameters for lights, scripting,
etc, which are not a simple ON/OFF.
THE SHELLY APP
Device inclusion
To add a new Shelly device, install it to the power grid fol-
lowing the Installation Instructions included with the device.
Step 1
When the installation of Shelly is done and the power is
turned on, Shelly will create its own Wi-Fi Access Point (AP).
ā WARNING! In case the device has not created its own
AP Wi-Fi network with SSID like , ShellyPlus1-f008d1d8bd68
please check if the device is connected according to the Instal-
lation Instructions. If you still do not see an active Wi-Fi net-
work with SSID like , or you want ShellyPlus1-f008d1d8bd68
to add the device to another Wi-Fi network, reset the device. If
the device has been powered on, you have to restart it by pow-
ering it off and then again on. After that you have one minute
to press 5 consecutive times the button/switch connected to
the SW terminal. You should hear the relay trigger itself. After
the trigger sound, Shelly Plus 1 will return to AP mode. If not,
please repeat or contact our customer support at:
support@shelly.cloud .
Step 2
Please keep in mind that Shelly devices inclusion is different
on iOS and Android devices.
1. iOS inclusion - Open the settings menu on your iOS device >
āŠdd deviceā and connect to the Wi-Fi network created by your
Shelly device, i.e. . Open ShellyPlus1-f008d1d8bd68 (ī¼g. 1)
your Shelly App again and type in your home Wi-Fi credentials
(ī¼g. 2). After clicking āNextā, a menu will open allowing you to
choose the device which you want to include, or include any
found in the network. Shelly Plus is equipped with Bluetooth and
the last option in the menu allows you to āSearch by Bluetoothā,
allowing for a quicker inclusion.
ī¼g. 1
ī¼g. 2
2. Android inclusion - From the hamburger menu on the main
screen of your Shelly App choose āAdd deviceā. Then choose
your home network and type in your password (ī¼g. 3). After
that, pick the Shelly device you want to include. The name of
the device will be similar to: ShellyPlus1-f008d1d8bd68 (ī¼g.
4). Shelly Plus 1 is equipped with Bluetooth and a small Blue-
tooth icon will be available next to it, allowing for inclusion using
Bluetooth.
ī¼g. 3
ī¼g. 4
Step 3
Approximately 30 sec. after discovering any new devices Š¾n
the local Wi-Fi network, Š° list will be displayed in the āDiscov-
ered Devicesā room by default.
Step 4
Select āDiscovered devicesā and choose the device you want
to include in your account.
Step 5
Enter a name for the device (in the Device Name ī¼eld).
Choose a āRoomā, in which the device will be positioned and
controlled from. You can choose an icon or add a picture to
make it easier to recognize. Press āSave deviceā.
Step 6
To control Shelly devices only through the local network,
press āNoā
Device Settings
After your Shelly device is added in the application, you can
control it, change its settings, and automate the way it works.
To switch the device on and off, use the ON/OFF button. For
device management, simply click on the deviceās name. From
there you may control the device, as well as edit its appear-
ance and settings.
Timer - allows you to manage the power supply to the device
automatically. You may use:
ā¢ Auto OFF: After turning on, the relay output will automati-
cally shut down after a predeī¼ned time (in seconds).
ā¢ Auto ON: After turning off, the relay output will be automat-
ically turned on after a predeī¼ned time (in seconds).
ā¢ Schedule: This function requires a working connection to
the Internet. Shelly may turn on/off automatically at a pre-
deī¼nedned time and day throughout the week. Additionally,
Shelly may turn on/off automatically at sunrise/sunset, or at
a speciī¼ed time before or after sunrise/sunset. You may add
up to 20 weekly schedules.
Internet
ā¢ Wi-Fi 1: Allows the device to connect to an available WiFi
network. After typing the details in the respective ī¼elds, press
Connect.
ā¢ Wi-Fi 2: Allows the device to connect to an available WiFi
network, as a secondary (backup), if your primary WiFi net-
work becomes unavailable. After typing the details in the
respective elds, press Set.
ā¢ Access Point: Conī¼gure Shelly to create a Wi-Fi Access
point. After typing the details in the respective ī¼elds, press
Create Access Point.
ā¢ Ethernet: Connect the Shelly device to a network using an
ethernet cable. This requires a device reboot! Here, you can
also set a static IP address.
ā¢ Cloud: Connection to the cloud allows you to control your
device remotely and to receive notiī¼cations and updates.
ā¢ Bluetooth: Enable/disable.
ā¢ MQTT: Conī¼gure the Shelly device to communicate over
MQTT.
Application Settings
ā¢ Device Name: Set a name for your device.
ā¢ PIN lock: Restrict control of the Shelly device through the
web interface by setting a PIN code. After typing the details
in the respective ī¼elds, press āRestrict Shellyā.
ā¢ Input State Display: View the state of your input (on/off).
An option is available to add input state identiī¼er to the pow-
er button.
ā¢ Exclude from Event Log: Do not show events from this
device in the app.
ā¢ Consumption calculation: Tracks the total energy con-
sumed by the device.
- Exclude from total room consumption: Option to exclude
the device from the roomās total power consumption.
- Exclude from total account consumption: Option to ex-
clude the device from the accountās total power consump-
tion.
Webhooks
Use events to trigger http endpoints. You can add up to 20
webhooks.
Share
Share the control of your device with other users.
Settings
ā¢ Input/Output Settings: These settings deī¼ne the way the
attached switch or button controls the output state. The
possible input modes are ābuttonā and āswitchā, and the relay
mode can be chosen depending on the preffered usage of
the device.
ā¢ Invert Switch: When the input is on, the output is off and
when the input is off, the output is on.
ā¢ Appliance Type: Choose from a given list what type of ap-
pliances your Shelly Plus 1 will be used with. The available
options are āSocket, Lights, Heating, Entertainmentā, however
a custom one can be set as well.
ā¢ Firmware version: Shows your current rmware version. If a
newer version is available, you can update your Shelly device
by clicking Update.
ā¢ Geo Location And Time Zone: Set your time zone and
geo-location manually, or enable/disable automatic detec-
tion.
ā¢ Device Reboot: Reboot your Shelly Plus 1.
ā¢ Factory Reset: Remove Shelly Plus 1 from your account
and return it to its factory settings.
ā¢ Device Information: Here you can view the ID, IP and other
settings of your device. Upon clicking āEdit deviceā, you can
change the room, name or image of the device.
THE EMBEDDED WEB INTERFACE
Shelly can be set and controlled through a browser.
Abbreviations used
Shelly ID - the unique name of the device. It consists of
12 hexadecimal characters, the base MAC address of the
device. It may include numbers and letters, for example
f008d1d8bd68.
SSID - the name of the Wi-Fi network, created by the device,
for example .ShellyPlus1-f008d1d8bd68
Access Point (AP) - the mode in which the device creates its
own Wi-Fi connection point with the respective name (SSID).
Wi-Fi - the mode in which the device is connected to another
Wi-Fi network.
Initial inclusion
Step 1
Install Shelly following the connection diagrams described in
the āUser and Safety Guideā with the device, and place it into
the breaker box. After turning the power on, Shelly Plus 1 will
create its own Wi-Fi network (AP).
ā WARNING! If you donāt see the Wi-Fi -> AP, please fŠ¾llow
Step 1 from the Device Inclusion section of this guide.
Step 2
Shelly Plus 1 has created its own Wi-Fi network (AP), with
name (SSID) such as ShellyPlus1-f008d1d8bd68. Connect
to it with your phone, tablet, or PC.
Step 3
Type 192.168.33.1 into the address ī¼eld of your browser to
load the web interface of Shelly.
General - Home Page
This is the home page of the embedded web interface. If it
has been set up correctly, you will see information about the
state of the switch (ON/OFF), as well as functionality menus.
Channel settings - general settings about the channel. Here
you can conī¼gure I/O settings, channelās state, channelās
name, consumption type.
Timers - same as in the āShelly Device Settingsā section,
Timers.
Schedules - same as in the āShelly Device Settingsā section,
Schedules.
Webhooks - use events to trigger http endpoints. You can add
up to 20 webhooks.
Device - Here you can see your ī¼rmware version and update,
reboot, factory reset, and set your location and time zone.
ā¢ Authentication - you can set credentials to lock your device
or change already existing credentials.
Networks - conī¼gure Wi-Fi, AP, Cloud, Bluetooth, MQTT set-
tings.
Product specificaties
Merk: | Shelly |
Categorie: | Smarth home |
Model: | Plus 1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Shelly Plus 1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Smarth home Shelly
30 September 2024
28 Mei 2024
28 Mei 2024
28 Mei 2024
28 Mei 2024
28 Mei 2024
28 Mei 2024
28 Mei 2024
28 Mei 2024
28 Mei 2024
Handleiding Smarth home
- Smarth home Bosch
- Smarth home Philips
- Smarth home IKEA
- Smarth home Xiaomi
- Smarth home Panasonic
- Smarth home Bticino
- Smarth home Asus
- Smarth home Gigaset
- Smarth home Honeywell
- Smarth home ABB
- Smarth home Abus
- Smarth home Acer
- Smarth home Airlive
- Smarth home Ajax
- Smarth home Alecto
- Smarth home Aluratek
- Smarth home Aqara
- Smarth home Berker
- Smarth home Blaupunkt
- Smarth home Blumfeldt
- Smarth home Bose
- Smarth home Brennenstuhl
- Smarth home Burg-Wachter
- Smarth home Byron
- Smarth home D-Link
- Smarth home Danfoss
- Smarth home Denver
- Smarth home Devolo
- Smarth home Digi
- Smarth home DIO
- Smarth home Drayton
- Smarth home Easy Home
- Smarth home Elro
- Smarth home EQ-3
- Smarth home Eufy
- Smarth home Ezviz
- Smarth home Ferguson
- Smarth home FireAngel
- Smarth home Gardena
- Smarth home Gira
- Smarth home Gossen Metrawatt
- Smarth home Hager
- Smarth home Hama
- Smarth home Hikvision
- Smarth home Home Easy
- Smarth home Klarstein
- Smarth home KlikaanKlikuit
- Smarth home Kogan
- Smarth home Laica
- Smarth home Lenovo
- Smarth home LevelOne
- Smarth home Linksys
- Smarth home Livoo
- Smarth home Logicom
- Smarth home Logitech
- Smarth home MAC
- Smarth home Manta
- Smarth home Nedis
- Smarth home Netatmo
- Smarth home Netgear
- Smarth home Niko
- Smarth home Nobo
- Smarth home Perel
- Smarth home Profile
- Smarth home Qnect
- Smarth home Rademacher
- Smarth home Ranex
- Smarth home Redmond
- Smarth home Renkforce
- Smarth home Ring
- Smarth home Salus
- Smarth home SEC24
- Smarth home Smartwares
- Smarth home Somfy
- Smarth home Strong
- Smarth home Technisat
- Smarth home Tenda
- Smarth home Tesla
- Smarth home TFA
- Smarth home Theben
- Smarth home TP Link
- Smarth home Trust
- Smarth home V-Tac
- Smarth home Velleman
- Smarth home Vivax
- Smarth home Jung
- Smarth home One For All
- Smarth home Oregon Scientific
- Smarth home Osram
- Smarth home Caliber
- Smarth home KrĆ¼ger And Matz
- Smarth home Naxa
- Smarth home NGS
- Smarth home Niceboy
- Smarth home Steren
- Smarth home EMOS
- Smarth home KKT Kolbe
- Smarth home Hive
- Smarth home Imou
- Smarth home Trevi
- Smarth home REV
- Smarth home Chacon
- Smarth home Nexa
- Smarth home Swann
- Smarth home Dormakaba
- Smarth home SPC
- Smarth home Cisco
- Smarth home Sanus
- Smarth home EVOLVEO
- Smarth home Delta Dore
- Smarth home Fibaro
- Smarth home Paulmann
- Smarth home Energenie
- Smarth home Cleanmaxx
- Smarth home CyberPower
- Smarth home Totolink
- Smarth home Inkbird
- Smarth home Reolink
- Smarth home Speed-Link
- Smarth home Busch-Jaeger
- Smarth home Audac
- Smarth home Eltako
- Smarth home Rain Bird
- Smarth home ATen
- Smarth home Popp
- Smarth home Fanvil
- Smarth home August
- Smarth home Aiphone
- Smarth home EQ3
- Smarth home Homematic IP
- Smarth home X-Sense
- Smarth home Crestron
- Smarth home Chuango
- Smarth home ETiger
- Smarth home Airthings
- Smarth home Brilliant
- Smarth home KanexPro
- Smarth home Vimar
- Smarth home Intertechno
- Smarth home EKO
- Smarth home Schellenberg
- Smarth home Sungrow
- Smarth home Aeotec
- Smarth home Adurosmart
- Smarth home Govee
- Smarth home Nous
- Smarth home Athom
- Smarth home Casambi
- Smarth home Tellur
- Smarth home TELE System
- Smarth home SwitchBot
- Smarth home Nanoleaf
- Smarth home Mach Power
- Smarth home Sonoff
- Smarth home Blebox
- Smarth home Lutron
- Smarth home Meross
- Smarth home Middle Atlantic
- Smarth home Origin Acoustics
- Smarth home Winland
Nieuwste handleidingen voor Smarth home
23 December 2024
23 December 2024
23 December 2024
11 December 2024
9 December 2024
9 December 2024
8 December 2024
6 December 2024
5 December 2024
3 December 2024