Sharpal 191H Handleiding
Sharpal
Messenslijper
191H
Lees hieronder de š handleiding in het Nederlandse voor Sharpal 191H (3 pagina's) in de categorie Messenslijper. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/3
User Manual
Item No. 191H
BEFORE SHARPENING:
Place the sharpener on a ī
©at surface. (See Fig. 1)
To prevent the sharpener and table from being cut by knife or scissors, place the sharpener as close as possible to the
table edge while sharpening. (See Fig. 2)
Press down the black lever securing the sucī³on pad on surface. When you ī
nish sharpening, pull the lever up, the
sharpener will be separate from the table. (See Fig. 3)
KNIFE SHARPENING INSTRUCTION:
Knife includes all knives of double-beveled edge. This sharpener is not suitable for single-beveled edge knives.
1. Insert blade fully and verī³cally into appropriate sharpening slot at a 90-degree angle to the sharpener. Gently pull
the knife blade with light pressure from heel to īŖp in direcīŖon of indicator arrows. (See Fig. 4)
No. V-Notch slot (Coarse CARBIDE) - Quickly set a new edge1
No. V-Notch slot (Fine CERAMIC) - Hone for a smooth ī
nished edge2
Note: Light pressure is suī
cient when using the knife sharpener. Heavy pressure might cause to lose control of the
knife and could cause possible injury. Carefully and gradually increase pressure unī³l the desired result is achieved.
The No. CERAMIC slot is for ī
ne honing of slightly dull edge. The The No. CARBIDE slot is for dull or damaged edge2 1
that requires new edge seīæng. Try to sharpen with No. CERAMIC slot ī
rstly for your valuable knives.2
Use No. 2 CERAMIC slot only to sharpen your serrated edge knife. (See Fig.5)
2. Repeat above acī³on unī³l blade is sharp. Always pull the blade through the sharpening slot from heel to ī®p,
never back and forth.
SCISSORS SHARPENING INSTRUCTION:
Note: Scissors blades are single-beveled, only sharpen the side of each blade that has a bevel.
Open your scissors and lay the edge to be sharpened of the beveled side of one blade across the carbide sharpening
blade, which is located above the scissorsā icon. Place the open hinged scissors blade all the way up to the horizontal
carbide sharpening blade, and make sure that the scissors blade is angled to make the bevel side of scissors blade fully
lean on the horizontal carbide sharpening blade.
1. With light pressure pull the blade in the direcī®on of the arrow with a downward moī³on all the way through the
sharpener following the preset angle on the scissors. (See Fig. 6) Repeat this process several ī³mes unī³l you
achieve a sharp edge. This may take several passes and you may need to increase your pressure during this
process. .Do not push the scissors blade over the sharpening blade
2. Repeat the above steps for the second scissors blade.
3. Aī
er sharpening the scissorsā edge, there are speciī
c rough burrs of metal across the sharpened edges of the
blades. Burrs can quickly be removed by seīæng the scissors back together, and opening and closing them a few
ī³mes.
MAINTENANCE:
1. Clean the exterior with a damp soī
cloth.
2. Oil or other lubricaī³ng liquid is not necessary.
CAUTION: Recommend to wear gloves when sharpening a blade with this product. No need to place free hand on
top of the sharpener during use.
WARNINGS: This product is not a toy. Keep out of the reach of children.
*Watch its demo video on YouTube:
bit.ly/191video
Or scan QR code
*If you want to read the user manual in Spanish and French, please go to SHARPAL website to download it.
www.sharpal.com
*Each SHARPAL product is warranted to be free from defects in material and workmanship for 3 years from the
date of purchase under normal wear and tear, except for damage caused by misuse or alteration. THIS WARRANTY
APPLIES ONLY TO NON-INDUSTRIAL OR NON-COMMERCIAL USE. If you want to make a warranty claim, please
contact us through SHARPAL website or send an email directly to warranty@sharpal.com.
Product specificaties
| Merk: | Sharpal |
| Categorie: | Messenslijper |
| Model: | 191H |
Heb je hulp nodig?
Als je hulp nodig hebt met Sharpal 191H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Messenslijper Sharpal
9 Juli 2024
Handleiding Messenslijper
- Messenslijper IKEA
- Messenslijper Krups
- Messenslijper Adler
- Messenslijper Ambiano
- Messenslijper Bartscher
- Messenslijper Beper
- Messenslijper Berkel
- Messenslijper Bifinett
- Messenslijper Blokker
- Messenslijper Bomann
- Messenslijper Domo
- Messenslijper EdgeCraft
- Messenslijper Fagor
- Messenslijper Gardenline
- Messenslijper Gastroback
- Messenslijper Gourmetmaxx
- Messenslijper Graef
- Messenslijper Gude
- Messenslijper Melissa
- Messenslijper Powerplus
- Messenslijper Presto
- Messenslijper Princess
- Messenslijper Roadstar
- Messenslijper Salter
- Messenslijper Silvercrest
- Messenslijper Sogo
- Messenslijper Steba
- Messenslijper Studio
- Messenslijper Tower
- Messenslijper Trebs
- Messenslijper Ozito
- Messenslijper Clatronic
- Messenslijper Guzzanti
- Messenslijper OBH Nordica
- Messenslijper Orbegozo
- Messenslijper Tacklife
- Messenslijper Eldom
- Messenslijper Waring Commercial
- Messenslijper Brentwood
- Messenslijper Herkules
- Messenslijper Genie
- Messenslijper C3
- Messenslijper Orava
- Messenslijper Alpha Tools
- Messenslijper For_Q
- Messenslijper WĆ¼sthof
- Messenslijper Work Sharp
- Messenslijper Petra Electric
- Messenslijper GARDE
- Messenslijper Chef's Choice
- Messenslijper IdeenWelt
- Messenslijper Donau Elektronik
Nieuwste handleidingen voor Messenslijper
17 November 2024
17 November 2024
16 November 2024
5 September 2024
15 Augustus 2024
15 Augustus 2024
15 Augustus 2024
8 Augustus 2024
18 Mei 2024
17 Mei 2024