Sharp XG-MB55X Handleiding

Sharp Beamers XG-MB55X

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Sharp XG-MB55X (68 pagina's) in de categorie Beamers. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/68
MULTIMEDIA PROJECTOR
MODEL
XG-MB55X
XR-20X/XR-20S
XR-10X/XR-10S
OPERATION MANUAL
Introduction Quick Start Setup Connections Basic
Operation
Useful
Features Appendix
ii
IMPORTANT
β€’ For your assistance in reporting the loss
or theft of your Projector, please record
the Model and Serial Number located on
the bottom of the projector and retain this
information.
β€’ Before recycling the packaging, please
ensure that you have checked the con-
tents of the carton thoroughly against the
list of β€œSupplied accessories” on page 10.
Model No.:
Serial No.:
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporat-
ing a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362
fuse marked or and of the same rating as above, which is also indicated on the pin
face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse
cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug
supplied, cut off the mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immedi-
ately and disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket
outlet, as a serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
WARNING:
THIS APPARATUS MUST BE EARTHED.
IMPORTANT:
The wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug proceed as follows:
β€’The wire which is coloured green-and-yellow must be connected to the terminal in the
plug which is marked by the letter E or by the safety earth symbol or coloured green or
green-and-yellow.
β€’The wire which is coloured blue must be connected to the terminal which is marked with
the letter N or coloured black.
β€’The wire which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
iii


Product specificaties

Merk: Sharp
Categorie: Beamers
Model: XG-MB55X
Gewicht: 3900 g
Geluidsniveau: 33 dB
Soort lamp: SHP
Stroomvoorziening: 100-240V AC(50/60Hz)
Connectiviteitstechnologie: Draadloos
Typische contrastverhouding: 2000:1
Markt positionering: Presentatie
Projector helderheid: 2500 ANSI lumens
Projectietechnologie: LCD
Projector native resolution: XGA (1024x768)
Frequentiebereik horizontaal: 15 - 70 kHz
Frequentiebereik verticaal: 45 - 85 Hz
Type lichtbron: Lamp
Volledige HD: Ja
Digitale zoom: 1.15 x
Interface: Infrared, RS232C
Lampvermogen: 275 W
Audio-ingangen: PC/Component Stereo Audio-3.5m stereo mini Connector, "Video" Stereo Audio-1-pair RCA pin-typ
Audio-uitgang: RGB Monitor Loop-Through - 15 Pin HD, VAO line-out - 3.5mm
Beeldverhouding: 4:3, 16:9
Aansluitingen: Computer/RGB(or Component)-15 Pin HD(x2)RS-232C-9 pin mini DIN
Compatibiliteit: PC, Mac, Workstation
Afmetingen (B x D x H): 315 x 294 x 120 mm
Lenssysteem: Short Throw Manual Zoom & Focus
Stroomverbruik (typisch): 350 W

Heb je hulp nodig?

Als je hulp nodig hebt met Sharp XG-MB55X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden