Seville Classics SHE05813BZ Handleiding

Seville Classics Niet gecategoriseerd SHE05813BZ

Lees hieronder de 📖 handleiding in het Nederlandse voor Seville Classics SHE05813BZ (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Step 7:

Fasten a pair of slip sleeves at the top of each

pole and slide the Top Shelf (I) over the poles

until secure.

Step 8:

Repeat steps 1-7 to assemble the second

tower.

Note: Make sure both sets of rod brackets are

installed at the same height on both towers.

Step 9:

Place the in the center of each U-Sleeves (H)

rod bracket. Install the by Expandable Rod (J)

inserting the through the Screws (for rod) (G)

u-sleeves on both ends of each rod. Tighten the

screws on both ends of each expandable rod

with a Phillips screwdriver. Place Shelf Liners

(K) on the small shelves.

Weight Capacity:

100 lbs per shelf

125 lbs on expandable rod (not extended)

50 lbs on expandable rod (extended)

TF120919

Expandable Closet Organizer

Model No. 05813

Assembly Instructions

Customer Service

Tel (310) 533-3800

Tel (800) 323-5565

Fax (310) 533-3899

Monday - Friday 8:30am to 4:30pm PST

Seville Classics, Inc.

Torrance, CA 90501 USA

www.sevilleclassics.com

Please read and save these instructions

Step 1:

Screw the into 4 Leveling Feet (D) Bottom

Poles (B).

Step 2:

On the bottom of each pole, fasten a pair of

Slip Sleeves (C) around the grooves at the

desired shelf height.

Step 3:

Slide a over the top of 4 Small Shelf (E)

bottom poles until it rests snugly over the slip

sleeves. Repeat steps 2 and 3 by attaching

slip sleeves and another small shelf at the

desired height.

Tip: It is easier to do this step with the unit on

its side. If necessary, use a rubber mallet to

further secure the shelf.

Step 4:

Once the unit is stable and upright, screw 4

Top Poles (A) into the bottom poles.

Step 5:

Determine the desired height to install the Rod

Bracket (F). Fasten a pair of slip sleeves

around the grooves on two poles and slide the

rod bracket over the two poles.

Step 6:

Install the 3rd and 4th small shelf at the

desired height. Repeat step 5 to add another

rod bracket.

Note: Leave enough room above the rod

bracket to install the Top Shelf (I).

2 pcs

Top Shelves

2 pcs

Expandable Rod

8 pcs

Shelf Liners

IJKAssembly Tools

Required

Phillips Screwdriver

8 pcs

Small Shelves

4 pcs

Rod Bracket

4 pcs

Screws (for rod)

4 pcs

U-Sleeve

EFG H

8 pcs

Top Poles

8 pcs

Bottom Poles

48 pairs

Slip Sleeves

8 pcs

Leveling Feet

ABC D

Plastic cap (top)

Threaded (bottom)

Please make sure you have all the parts before starting assembly.

Product specificaties

Merk:	Seville Classics
Categorie:	Niet gecategoriseerd
Model:	SHE05813BZ
Gewicht:	24040 g
Breedte:	2108.2 mm
Diepte:	355.6 mm
Hoogte:	1828.8 mm
Frame kleur:	Roestvrijstaal
Frame materiaal:	Metaal
Breedte wanneer opgevouwen:	1473.2 mm
Type product:	Kledingrek