Senal ASM-MNTKIT Handleiding

Senal Niet gecategoriseerd ASM-MNTKIT

Lees hieronder de 📖 handleiding in het Nederlandse voor Senal ASM-MNTKIT (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

USER’S GUIDE

Precautions

• Please read and follow these instructions and keep this manual in a

safe place.

• Clean this product with only a soft, dry cloth.

• Keep this product away from children.

• Make sure that this product is intact and that there are no missing

parts.

• To avoid damage to this product, be careful not to overtighten or

improperly thread any of the threaded fittings.

• Do not exceed the maximum load capacity.

• All photos are for illustrative purposes only.

Contents Include

• Wall plate

• Two (2) vertical mounting brackets

• Horizontal mounting bracket

• Removable mounting bracket

• 4 Removable mounting plates

• Mounting-plate bolt

• Two (2) Mounting-plate nuts

• Two (2) 6 40 mm mounting screws×

• Two (2) 6 60 mm mounting screws×

• 8 mm screw

• Two (2) 3/8 screw anchors"

• Two (2) 4 12 mm machine screws×

• Two (2) 5 12 mm machine screws×

• Two (2) 6 12 mm machine screws×

• 5 mm hex key

Vertical Mounting

1. Start with the wall plate on a flat

surface. Orient the mounting

plate’s bolt-head so it's facing you.

2. Place one of the vertical

mounting brackets onto the

right-hand side of the wall plate

so their bolt holes are aligned.

Hold the mounting bracket in

place with the nut that has a

small bolt-hole.

Tip: The shape of the nut will

conform to the

corresponding side of the

wall plate.

3. Place the other vertical mounting bracket on the left-side of the wall

plate. Hold the mounting bracket in place with the nut that has a large

bolt-hole.

4. Insert the mounting-plate bolt through the nut that has a large

bolt-hole and use the included hex key to screw the bolt in place until

secure.

5. Confirm the desired mounting location on your wall. Hold the wall

plate against the wall at the desired mounting location, and use a

pencil to mark the exact location of the mounting holes.

6. Use a drill with a 1/4 bit to drill holes through the pencil marks."

7. Fully insert the included screw anchors into the holes.

8. Position the wall plate with the swivel-action bolt-head facing up.

Align the mounting holes with the screw anchors, and use the

6 40 mm or 6 60 mm mounting screws to secure the wall plate × ×

to the anchors.

Note: Use the 6 40 mm screws for the ASM-3 and ASM-4 speakers. ×

Use the 6 60 mm screws for the ASM-5 and ASM-6 speakers.×

9. Align the slots in the vertical mounting brackets with the mounting

holes in the speaker. Use the machine screws to secure the speaker to

the mounting bracket assembly. Use the 4 12 mm screws for the ×

ASM-3, the 5 12 mm screws for the ASM-4, and the 6 12 mm × ×

screws for the ASM-5 and ASM-6.

ASM-MNTKIT

Horizontal Mounting

Note: When mounting a pair of speakers horizontally, make sure to

position the tweeters on the outside in order to achieve proper stereo

imaging.

1. Start with the mounting plate on a

flat surface, with the mounting

plate’s bolt-head facing you.

2. Place the horizontal mounting bracket

onto the mounting plate so their bolt

holes are aligned.

3. Place the nut that has a small bolt-hole on

the right-hand side of the wall plate, and

the nut that has a large bolt-hole on the

left-hand side of the wall plate, and hole

them in place.

Tip: The shape of the nut will

conform to the corresponding

side of the wall plate.

4. Insert the mounting-plate bolt through the nut that has a

large bolt-hole and use the included hex key to screw the bolt in

place until secure.

5. Confirm the desired mounting location on your wall. Hold the wall

plate against the wall at the desired mounting location, and use a

pencil to mark the exact location of the mounting holes.

6. Use a drill with a 1/4 bit to drill holes through the pencil marks."

7. Fully insert the included screw anchors into the holes.

8. Position the wall plate with the swivel-action bolt-head facing up.

Align the mounting holes with the screw anchors and use the 6 40 ×

mm or 6 60 mm mounting screws to secure the wall plate to the ×

anchors.

Note: Use the 6 40 mm screws for the ASM-3 and ASM-4 speakers. ×

Use the 6 60 mm screws for the ASM-5 speakers.×

9. Align the horizontal mounting brackets with the mounting holes in

the speaker, and use the machine screws to secure the brackets to

your speaker. Use the 4 12 mm screws for the ASM-3, the 5 12 mm × ×

screws for the ASM-4, and the 6 12 mm screws for the ASM-5 and ×

ASM-6.

Removable Mounting

1. Start with the mounting plate on a flat

surface. Orient the mounting plate’s

bolt-head so it's facing you.

2. Place the removable mounting bracket

onto the mounting plate so their bolt holes

are aligned. Make sure the removable

mounting bracket is positioned so that

when you hold the assembly with the

swivel-action bolt-head facing up, the

bracket’s hook is also facing up, as it will

need to support your speaker. When

the hook is facing up, the screw

hole will be below the hook.

3. Place the nut that has a small

bolt-hole on the right-hand

side of the wall plate, and the nut that has a large bolt-hole on the

left-hand side of the wall plate, and hold them in place.

Tip: The shape of the nut will conform to the corresponding side of

the wall plate.

4. Insert the mounting-plate bolt through the nut that has a large

bolt-hole, and use the included hex key to screw the bolt in place until

secure.

5. Confirm the desired mounting location on your wall. Hold the wall

plate against the wall at the desired mounting location, and use a

pencil to mark the exact location of the mounting holes.

6. Use a drill with a 1/4 bit to drill holes through the pencil marks."

7. Fully insert the included screw anchors into the holes.

8. Position the wall plate with the swivel-action bolt-head facing up.

Align the mounting holes with the screw anchors and use the 6 40 ×

mm mounting screws to secure the wall plate to the anchors.

9. Detemine which of removable mounting plates fits your speaker by

aligning its mounting holes with the mounting holes in your speaker.

They should line up perfectly. The mounting plate should be flush

against the back of your speaker.

10. Use the provided machine screws to

secure the removable mounting

plate to your speaker.

Note: Use the 4 12 mm ×

machine screws for the

ASM-3 speaker. Use the

5 12 mm machine ×

screws for the ASM-4 and

ASM-5 speakers. Use the 6 12 ×

mm machine screws for the ASM-6 speaker.

11. Lift the speaker and carefully mount it onto the

removable mounting bracket’s hook via the removable

mounting plate.

To permanently fix your speaker to this mount, first attach the removable

mounting plate to the removable mounting bracket and secure it with

the included 4 8 mm screw. Then mount your speaker to the removable ×

mounting plate with your machine screws.

ASM-4

Compatibility

Construction

Tilt

Swivel

Maximum load capacity

Wall clearance

Wall plate dimensions

Weight

Senal ASM-series speakers

Aluminum

90°

160°

13.3 lb. (6 kg)

2.6 (6.5 cm)"

2.4 1.8 3.8 (6 4.5 9.6 cm)" × " × " × ×

14.5 oz. (410 g)

Mounting the ASM-6

1. The ASM-6 requires two horizontal mounts per speaker so you'll need

two of these kits for each one. Follow steps 1 through 4 of the

Horizontal Mounting instructions to assemble the horizontal mounts.

2. The horizontal mounts fit vertically onto the ASM-6, one on each side

of the speaker. Confirm the desired mounting location on your wall

and measure two spots 4 (10.2 cm) apart, one for each horizontal "

mount.

3. At each mounting location, hold the wall plate against the wall, and

use a pencil to mark the exact location of the mounting holes.

4. Use a drill with a 1/4 bit to drill "

holes through the pencil marks.

5. Fully insert the included screw

anchors into the holes.

6. Position the wall plates with

the swivel-action bolt-heads

facing up. Align the mounting

holes with the screw anchors

and use the 6 60 mm ×

mounting screws to secure

the wall plates to the anchors.

7. Align the horizontal mounting

brackets with the mounting

holes in the speaker and use

the 6 12 mm machine screws ×

to secure the brackets to your

speaker.

Tilting and Swiveling the Speaker

To adjust the vertical angle of the speaker, use the included hex key to

slightly loosen the horizontal mounting bolt. Tilt the speaker as desired

and retighten the bolt until secure.

To adjust the horizontal angle of the speaker, use the included hex key to

slightly loosen the vertical mounting bolt. Swivel the speaker as desired

and retighten the bolt until secure.

Important!

Always exercise caution when tilting and swiveling your speakers. Make

sure to keep one hand on the speaker to hold it steady.

Note: The ASM-6 can be adjusted only vertically.

Specifications

One-Year Limited Warranty

Senal provides a limited warranty to the original purchaser that this

product is free from defects in materials and workmanship under normal

consumer use for a period of one (1) year from the original purchase date

or thirty (30) days after replacement, whichever occurs later. Senal’s

responsibility with respect to this limited warranty shall be limited solely

to repair or replacement, at Senal’s discretion, of any product that fails

during normal consumer use. Inoperability of the product or part(s) shall

be determined by Senal. If the product has been discontinued, we

reserve the right to replace it with a model of equivalent quality and

function.

To obtain warranty coverage, contact Senal to obtain a return

merchandise authorization (“RMA”) number, and return the defective

product to Senal, along with the RMA number and proof of purchase.

Shipment of the defective product is at the purchaser’s own risk.

This warranty does not cover damage or defect caused by misuse,

neglect, accident, alteration, abuse, improper installation or maintenance.

EXCEPT AS PROVIDED HEREIN, SENAL MAKES NEITHER ANY EXPRESS

WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT

LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you

with specific legal rights, and you may also have additional rights that

vary from state to state.

Product specificaties

Merk:	Senal
Categorie:	Niet gecategoriseerd
Model:	ASM-MNTKIT

Heb je hulp nodig?

Als je hulp nodig hebt met Senal ASM-MNTKIT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Senal

Senal SCS-98 Handleiding

21 November 2024

Senal ASM-6 Handleiding

21 November 2024

Senal ASM-MNTKIT Handleiding

21 November 2024

Senal SMS-45 Handleiding

21 November 2024

Senal SCI-3212MP Handleiding

21 November 2024

Senal OLM-2S-P Handleiding

21 November 2024

Senal ME-220-CL Handleiding

21 November 2024

Senal ASM-4 Handleiding

21 November 2024

Senal CS-88 Handleiding

21 November 2024

Senal CSP-162 Handleiding

21 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Lucide Gipsy 35402/10/31 Handleiding

24 November 2024

Lucide Flatt 35600/10/43 Handleiding

24 November 2024

Lucide Flatt 35700/10/43 Handleiding

24 November 2024

Lucide Greg 35909/13/31 Handleiding

24 November 2024

Lucide Granel 36215/10/67 Handleiding

24 November 2024

Lucide Dual led 36410/40/11 Handleiding

24 November 2024

Lucide Granel 36415/30/67 Handleiding

24 November 2024

Lucide Jarich led 36419/20/62 Handleiding

24 November 2024

Lucide Jarich led 36419/25/62 Handleiding

24 November 2024

Lucide Dual led 36710/30/11 Handleiding

24 November 2024