Seima SLC-600B Handleiding

Seima Spoelbak SLC-600B

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Seima SLC-600B (1 pagina's) in de categorie Spoelbak. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
seima.com.au
Please note
βˆ’All measurements are in millimetres.
βˆ’Use silicone sealant. Do not use epoxy type adhesives.
βˆ’Specifications may vary without notice as part of our continuous improvement practices.
βˆ’Clean with a damp cloth. Do not use abrasive cleaners, liquids or pastes.
tilos-in | v 3.1
The door is held in place by a with long metal pin
a bend at the top.
To reverse the door opening, the pin can be
swapped to the other side of the cabinet.
Recommended tool:
long nose pliers
Instructions
1 First, remove the sink from the cabinet
to access the door pin from inside the
cabinet.
2 Remove the long pin to free the door.
3 Unscrew the magnetic door closures
and refasten these on the other side of
the door opening.
4 Reverse the door, and re-thread the
pin on the other side. See threading
sequence above.
How to reverse the door opening
Threading sequence
The pin is threaded in the following sequence:
1 Through the hole in the frame at the top of the
unit door opening
2 Then through the holes in the door
3 Then into a small washer
4 Then finally into the hole in the metal β€˜L’
bracket at the base of the unit
Important notes
The washer must be placed between the door and
metal β€˜L’ bracket at the base of the unit.
The magnetic door closures need to be transferred
to the other side of the cabinet.
Door
Threading sequence for metal pin:
Transfer magnetic
door closures
Installation Guide
Tilos Laundry Unit
Door
interior


Product specificaties

Merk: Seima
Categorie: Spoelbak
Model: SLC-600B

Heb je hulp nodig?

Als je hulp nodig hebt met Seima SLC-600B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden