Seco-Larm MVE-AT11-01NQ Handleiding

Seco-Larm AV extender MVE-AT11-01NQ

Lees hieronder de 📖 handleiding in het Nederlandse voor Seco-Larm MVE-AT11-01NQ (4 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.

Extenders for HDMI

over Single Cat5e/6

Manual

 Extend HDMI signals up to 230ft (70m) at 1080p over a single Cat5e/6 cable

 Plug and play operation comes as a complete set –

 Choose from either a tabletop model (MVE-AT -0 Q) or a double-11 1N gang

wall-plate model (MVE-AT11-W1N Q)

 The tabletop and wall-plate models are compatible with each other. Mix

and match the transmitter from one model to the receiver of the other.

MVE-AT11-01NQ

Extender for HDMI over Cat5e/6

MVE-AT11-W1NQ

Wall-plate Extender for HDMI over Cat5e/6

MVE-AT11-01NQ

MVE-AT11-W1NQ

ENFORCER Enhanced Extenders for HDMI® over Single Cat5e/6

2 SECO-LARM U.S.A., Inc.

Introduction:

The ENFORCER Enhanced Extenders for HDMI over Single Cat5e/6 extend the range of HDMI

signals by using an active transmitter and receiver to send video and audio over a single Cat5e/6

cable. 1080p HDMI Signals can be transmitted up to ft (70m) between the two units with zero 230

signal loss. The extender supports IR signals using the included adapters, allowing the user to use

a remote control from one end of an installation to control a device such as a TV or media player at

the opposite end of the installation.

Features:

 Signal Strength Active operation ensures that the signal strength will remain strong over –

the length of the cable.

 Distance – The Enhanced Extenders for HDMI over Single Cat5/e6 can transmit a clear

HDMI signal up to 2 ft (70m). 30

 Formats Supported The Enhanced Extenders for HDMI over Single Cat5e/6 support both –

progressive and interlaced formats: 1080p/1080i/720p/576p/576i/480p/480i.

 Plug and Play The Enhanced Extenders for HDMI over Single Cat5e/6 come as a complete –

set consisting of a transmitter, receiver, power supplies, and IR adapters. No adjustments or

settings be made. The unit is ready to use right out of the box.need to

 Zero Signal Loss Integrated circuits in the transmitter and receiver clean, buffer, and –

amplify the HDMI signal. This prevents signal loss and ensures a clear signal regardless of

the length of the cable up to the maximum range.

 Connect Multiple Units – Repeat sets to extend HDMI range up to 918ft (280m).up to four

 Mix and Match The tabletop and wall-plate models are compatible with each other. –

Connect a transmitter from one model to the receiver of another.

Specifications:

Input video sig nal

0.5~1.0 Vp-p

Input DDC signal

5Vp-p (TTL)

Maximum single link range

1920x1200, 1080p

Deep color

36-bit

Video formats supported

High-speed HDMI with 3D, HDCP 1.2

Audio formats supported

LPCM, Dolby-AC3, DTS 7.1, DSD

Output video

HDMI

Resolutions supported

1080p/1080i/720p/576p/576i/480p/480i

Range 1080p –

Cat6: Up to 230 70m) ’ (

Video amplifier bandwidth

10.2Gbps

Cat5e/6 Wiring standard

T568-B

Operating voltage

5VDC

Power supply

2A@5VDC (2 adapters) (2.1mm plug)

Current draw

Transmitter

450mA@5VDC

Receiver

900mA@5VDC

Operating temperature

5°~ ° F (-15°~55° C) 131

Operating humidity

5~90% RH (no condensation)

Dimensions

MVE-AT11-01NQ

/16 ”x215/16 ”x7/8” (110x75x23 mm)

MVE-AT11-W1NQ

/16”x41/2”x5/16” (116 34x115x mm)

Weight

MVE-AT11-01NQ

9.2-oz (260g)

MVE-AT11-W1NQ

9.3-oz (264g)

ENFORCER Enhanced HDMI® Extenders over Single Cat5e/6

SECO-LARM U.S.A., Inc. 3

Overview:

Back View

Front View

MVE-AT11-01NQ

Top View

Front View

MVE-AT11-W1NQ

Top View

Installation:

1. Determine where the transmitter and receiver will be wired as well as how much Cat5e/6 cable

will be necessary.

2. Connect the HDMI cable to both the transmitter and the source device.

3. Connect the HDMI cable to both the receiver and the display.

4. Connect the Cat5e/6 cable to both the receiver and transmitter units.

Note: For best results, use Cat6 cable.

5. Connect one 5VDC adapter to the transmitter and another to the receiver.

6. Determine which device, if any, will be controlled by the remote control. Install the IR

transmitter to the IR-TX port of the closest extender unit, pointing the IR transmitter at the

device. Install the IR receiver to the IR-RX port of the other extender unit. Point the remote

control at the IR receiver when in use.

7. gang box. MVE-AT11-W1NQ Only: Install the MVE-AT11-W1NQ using a standard double-

8. Switch on the HDMI source and display to verify that the system is functioning properly.

Steady ON

Flashing

OFF

Active

N/A

Unit is working

Unit is not

working/powered

Link

Connection OK

Check connection

Not connected

HDCP

Video has HDCP

Video does not have

HDCP

No video

Power

Power ON

Check power

Power OFF

/16”

7/8

”

Status LED Chart:

Status LEDs

HDMI Port

5VDC

Power input

RJ45 Port

5VDC

Power input

IR Adapter ports

IR Adapter

ports

Parts List

1 x Transmitter

1 x Receiver

2 x 5VDC Power adapters

1 x IR Transmitter

1 x IR Receiver

1 x Manual

/2” (114mm)

49/16”

(116mm)

/16”

(34mm)

Extender for HDMI over Cat5e/6

215/16

”

(75mm)

www.seco-larm.com

Please use T568-B wiring standard.

Extender for HDMI over Cat6e/6

HDMI In

Note: Only transmitters are shown above. The transmitters and receivers have the same dimensions and similar parts.

Product specificaties

Merk:	Seco-Larm
Categorie:	AV extender
Model:	MVE-AT11-01NQ
Kleur van het product:	Zwart
Gewicht:	260 g
Soort:	AV-zender & ontvanger
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Ondersteunde video-modi:	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Maximum resolutie:	1920 x 1200 Pixels
Inclusief AC-adapter:	Ja
Aantal:	2
Afmetingen (B x D x H):	110 x 75 x 23 mm
Operating voltage:	5 V
Maximaal bereik:	70 m
Bedrijfstemperatuur (T-T):	-15 - 55 °C
Ondersteundende kabel types:	Cat5e, Cat6