Seco-Larm MVE-AH010Q Handleiding

Seco-Larm AV extender MVE-AH010Q

Lees hieronder de 📖 handleiding in het Nederlandse voor Seco-Larm MVE-AH010Q (4 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.

MVE-AH010Q

Extender for HDMI Over Dual Cat5e/6

Manual

 Extend HDMI over two Cat5e/6 cables

 Supports resolutions from 480i to 1080p with zero signal loss

 Transmits up to 1 60m) at 1080p over two Cat6 cables 97ft (

 Plug and play operation comes as a complete set –

ENFORCER Extender for HDMI over Dual Cat5e/6

2 SECO-LARM U.S.A., Inc.

Introduction:

The ENFORCER HDMI Extender over Cat5e/6 extends the range of HDMI by using a

transmitter and an active receiver to send video and audio over two Cat5e/6 cables.

HDMI Formats as high as 1080p can be transmitted up to 1 60m) between the two 97ft (

units with zero signal loss.

Features:

 Signal Strength nsmitter ensures that the signal strength will remain strong over –Tra

the length of the cable.

 Distance The HDMI Extender over Cat5e/6 is capable of providing a clear HDMI –

signal up to 1 (60m). 97ft

 Formats Supported The HDMI Extender over Cat5e/6 supports both progressive and –

interlaced formats: 1080p/1080i/720p/576p/576i/480p/480i.

 Plug and Play The HDMI Extender over Cat5e/6 comes as complete set consisting –a

of a transmitter, receiver, and power supply. No adjustments or settings must be made,

the unit is ready to use right out of the box.

 Zero Signal Loss Integrated circuits in the transmitter and receiver clean, buffer and –

amplify the HDMI signal to prevent signal loss and ensure a clear signal regardless of

the length of the cable.

Specifications:

Parts List:

1 x Transmitter (MVE-AH010Q-TQ)

1 x Receiver (MVE-AH010Q-RQ)

1 x 5VDC Power adapter

1 x Manual

Input video signal

0.5~1.0 Vp-p

Input DDC signal

5Vp-p (TTL)

Maximum single link range

1080p

Video formats supported

High-speed HDMI, HDCP 1.2

Audio formats supported

Dolby TrueHD, DTS-HD Master Audio

Output video

HDMI

Resolutions supported

1080p/1080i/720p/576p/576/i/480p/480i

Range 1080p –

Cat6: 1 6 97’ ( 0m); Cat5e: 98’ (30m)

Video amplifier bandwidth

6.75Gbps

Cat5e/6 Wiring standard

T568-B

Operating voltage

5VDC

Power supply

5VDC@1A (2.1mm plug)

Current draw

Transmitter

N/A

Receiver

400mA@5VDC

Operating temperature

23°~95° F (-5°~35° C)

Operating humidity

5~90% RH (no condensation)

Dimensions

33/16 ”x13/4”x7/8” (81x45x22mm)

Weight

8.7-oz (246g)

ENFORCER Extender for HDMI over Dual Cat5e/6

SECO-LARM U.S.A., Inc. 3

Included 5VDC

Power Adapter

Overview:

Back

Top

Left

Right

5VDC Power input

Cat5e/6 Ports

HDMI Output

Status LEDs

Installation:

1. Determine the locations where the HDMI to Cat5 units will be placed as well as how much e/6

Cat5e/6 cable will be necessary.

2. Connect the HDMI to cable to both the transmitter and source device.

3. Connect the HDMI cable to both the receiver and display.

4. Connect Cat5e/6 cables to both the receiver and transmitter units. Make sure connect the the to

cables to their respective ports, i.e. Cat5e/6-1 connected to Cat5e/6-1 Cat5e/6-2 connected , and

to Cat5e/6- 2.

Note: For best results, use Cat6 cable.

Note: For best results, use solid core cable. Stranded core cable is not recommended.

5. Connect the 5VDC adapter to the receiver unit.

6. Switch on the HDMI source device and display to verify that the system is functioning properly.

Two Cat5e/6 cables are required. Please use T568- wiring standard. B

Sample Application:

HDMI Cable

HDMI Source

HDMI

Display

Transmitter

Receiver

Two Cat5e/6 Cables

HDMI Cable

Use T568B UTP wiring standard

(Receiver shown)

Product specificaties

Merk:	Seco-Larm
Categorie:	AV extender
Model:	MVE-AH010Q
Kleur van het product:	Zwart
Gewicht:	246 g
Soort:	AV-zender
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Stroom:	0.4 A
Ondersteunde video-modi:	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Maximum resolutie:	1920 x 1080 Pixels
HDCP:	Ja
Afmetingen (B x D x H):	81 x 45 x 22 mm
Operating voltage:	5 V
Maximaal bereik:	60 m
Bedrijfstemperatuur (T-T):	-5 - 35 °C
Ondersteundende kabel types:	Cat5e, Cat6