SEADA SWP02 Handleiding

SEADA Processor SWP02

Lees hieronder de 📖 handleiding in het Nederlandse voor SEADA SWP02 (8 pagina's) in de categorie Processor. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

SolarWall Pro Controller Quick Start Guide

This quick start guide provides basic instructions for setting up SEADA SolarWall Pro video wall

controllers. For additional information about how to use the controllers, please see the User

Manual, which is available on the CD included in this package.

S up Steps et

1. Verify the Package Contents

2. Hardware Overview

3. Hardware Installation

4. Software Installation & IP Setup on Control PC

5. Configuration of Video Wall Management Software

6. SWPro Management Software Brief Introduction

1. Verify the Package Contents

Please verify the package contents against the Packing List (Document No. SD- -005) OP

If any of the items in packing list is missing, please contact your reseller.

Document No. - -020 SD MA

Document Version: 01

SolarWall Pro Controller Quick Start Guide

2. Hardware Overview

Model: P02 (2U Chassis) SW

Model: P04 (4U Chassis) SW

Model: SWP10

Model: SWP16

1. Slots fo

2. Hybrid

3. Power

4. RS232

5. RJ45 N

6. Power

7. Keyboa

4 5 6 7

SolarWall Pro Controller Quick Start Guide

3. Hardware installation

3.1. Note

A computer running Microsoft Windows2000/XP/Vista/7/8/10 (not supplied) is required as control a

PC for the SEADA controller.

3.2. Basic Connection

Connect the supplied power cable from the controller (Figure 1- to a power outlet. 3)

Connect the SEADA video wall controller (Figure 1-5) to the control PC via Ethernet cable.

3.3. Connect Outputs to Displays

Connect the controller outputs to the video wall displays using the appropriate cables or adapters

(not supplied).

Please see Figure 2 below for the channel mapping between the video wall controller output ports

and the video wall displays.

2 & 4U Chassis Output

10 up Chassis Outputs & 10

Video Wall Display

Figure 2

Product specificaties

Merk:	SEADA
Categorie:	Processor
Model:	SWP02
Kleur van het product:	Zwart
Breedte:	482 mm
Diepte:	380 mm
Hoogte:	88 mm
Ethernet LAN:	Ja
Ondersteunde video-modi:	720p, 1080p, 2160p
HDCP:	Ja
Ingangsspanning:	110 - 240 V
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Temperatuur bij opslag:	0 - 60 °C
Frequentie:	50/60 Hz
Luchtvochtigheid bij opslag:	10 - 90 procent
Rackcapaciteit:	2U
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
RS-232/422-connector:	Ja