Scott CMX-130 Handleiding

Scott Radio CMX-130

Lees hieronder de 📖 handleiding in het Nederlandse voor Scott CMX-130 (3 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

CMX 130

Alarm Clock Radio with Digital

Display

Instruction Manual

GB-1

PRECAUTIONS

Follow the advice below for safe and appropriate operations.

INSTALLATION

. Do not use the unit in places which are extremely hot, cold, dusty, or humid.

. Place the unit on a flat and even surface.

. Do not restrict the airflow of the unit by placing it in a place with poor airflow, by covering it

with a cloth, or by placing it on a carpet.

. Do not place naked flame sources such as lighted candles on the apparatus.

. Use the apparatus only in moderate climates (not in tropical climates).

. Do not expose the apparatus to dripping or splashing.

. Do not place objects filled with liquids, such as vases, on the apparatus.

SAFETY

. When connecting and disconnecting the AC power cord from the AC mains outlet, pull the plug

and not the cord itself. Pulling the cord may damage it and may be dangerous.

. The mains plug must remain readily operable.

. When you are not going to use the unit for a long period of time, disconnect the AC power cord

from the AC mains outlet.

AC VOLTAGE

. Before use, check that the rated voltage of your unit matches your local voltage.

CONDENSATION

. When there is condensation inside the unit, it may not function normally.

. Unplug the unit for 1 to 2 hours before turning the power back on, or gradually heat the room

up and dry the unit before use.

. Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.

. Do not impede the ventilation by covering the ventilation openings with items such as

newspapers, tablecloths, curtains, etc.

BATTERIES

. Pay attention to the environmental aspects of battery disposal.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with an

arrowhead symbol within a

triangle is a warning sign

alerting the user to the

presence of “dangerous

voltage” inside the unit.

ATTENTION: To reduce the risk

of electric shock, do not

remove the cover. There are no

user serviceable parts inside

the unit. Refer all servicing to

qualified personnel.

The exclamation mark

within a triangle is a warning

sign alerting the user to the

presence of important

instructions accompanying

the product.

GB-2

1 2

345

16 15 14 1213 11 10 9

1 2 3 4 5 6 7 8

PACKAGE INCLUDES:

1. Alarm clock radio

2. AC/ DC adapter

3. Instruction manual

LOCATION OF CONTROLS

1. HOUR/DAY, AL ON/MODE button

2. TIME button

3. TEMP button (temperature)

4. DATE button

5. MIN/MONTH button

6. ALARM button

7. TUNING dial

8. Speaker

9. FM antenna wire

10. DC IN 6V jack

11. Headphones jack

12. Radio on LED indicator

13. button

14. VOLUME dial

15. COLOR button

16. Clock back up battery compartment

17. Temperature sensor

18. Multi-color LCD display

19. SNOOZE button

LCD DISPLAY

1. Buzzer alarm indicator

2. SNOOZE indicator

3. MONTH

4. Month /Temperature value

5. DAY

6. Day (01,…,31)

7. Temperature in °C: degrees Celsius

8. Minutes

9. Seconds indicator (flashes once per second)

10. Hours

11. AM / PM indication for 12-hour clock display

12. Back up battery indicator

13. Alarm indicator

GB-3

INSTALLING THE BATTERY

Installing the clock back up battery

Clock back up

The clock and alarm time can be maintained against power failure with a 3V lithium battery (not

supplied). In the event of power failure, the clock time will still run and the clock back-up battery

indicator “ ” is displayed, but without the display backlight. During power interruption, the clock

time may gain or lose a few minutes per hour and may require resetting.

Battery insertion

1. Open the battery compartment on the bottom of the unit by pushing and rotating

anticlockwise.

2. Insert a 3V lithium battery (CR2025 or equivalent) into the battery compartment, following the

correct polarities marked inside the battery compartment.

3. Replace the battery cover by pushing and rotating clockwise.

Note: For optimum performance, the battery should be replaced every 6 months.

Precautions when using batteries

1. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same

or equivalent type.

2.Ensure that you follow the correct polarities when installing the battery as indicated in the

battery compartment. Reversed batteries may cause damage to the unit.

3. Exhausted batteries must be removed to prevent possible battery leakage.

4. Dispose of batteries properly according to environmental regulations.

Notes on the clock back up battery

Please note that this unit will not operate fully by battery power alone. The batteries provide a

back up system only in the event of an interruption of the AC power supply.

OPERATING INSTRUCTIONS

Connecting the power supply

Insert the AC/DC adapter plug into the AC mains outlet with a 230V AC ~ 50Hz power source

and the other end into the DC IN 6V jack at the back of the unit. The unit goes to standby mode

and the clock starts to run.

Clock and Alarm time setting

Select 24-hour or 12-hour clock display

The 24-hour clock display is the default setting. Press and hold down the TIME button to select

the 12-hour clock display and “AM” or “PM” will be indicated on the display. Press and hold the

TIME button again to select the 24-hour clock display.

Setting the clock

1. Press the TIME button and the clock time display will flash.

2. Press the HOUR button to set the hours.

3. Press the MIN button to set the minutes.

4. Press and hold down the HOUR or MIN button to quickly change the hours or

minutes.

5. Press the TIME button again to confirm the time setting.

GB-4

Setting the date

1. Press the DATE button and the date display will flash.

2. Press the DAY button to set the day.

3. Press the MONTH button to set the month.

4. Press and hold down the DAY or MONTH button to quickly change the day or month.

5. Press the DATE button again to confirm the time setting.

Note: On this unit, February contains 29 days. However, this only happens once every four

years. If the month of February only contains 28 days, you will have to correct the date at

the end of the month and go manually from 29/02 to 01/03.

Setting the alarm time

1. Press the ALARM button and the alarm time will flash.

2. Follow the above steps 2 to 4 in “Setting the clock” to set the alarm time and “ ” will be

displayed.

3. Press the ALARM button again to confirm the alarm time setting.

Alarm operation

The unit allows you to wake up to the sound of the buzzer or radio.

1. Press the ALARM button and alarm time will flash.

2. To adjust the alarm time, follow the above steps in “Setting the alarm time”.

3. Press the AL ON/MODE button to activate the alarm function.

4. Press the AL ON/MODE button again to select the buzzer ( ) or the radio

alarm mode ( ).

5. When the preset alarm time is reached, the alarm will sound in the selected

alarm mode (buzzer or radio).

6. Press button to stop the alarm and it will sound again the next day.

7. To cancel the alarm function, press and hold down the ALARM button for about 2 seconds.

Note: While the buzzer alarm volume is fixed and cannot be adjusted, the radio

alarm volume can be adjusted to your desired level using the VOLUME dial.

To select the station, refer to “RADIO OPERATION”.

Snooze function

When the alarm sounds, press the SNOOZE button to stop the alarm temporarily and it will

sound again after 9 minutes. This alarm cycle will repeat up to one hour. To cancel the

SNOOZE function and repeat the alarm the next day, press the button.

Temperature LCD display

Press the TEMP button to display the temperature in °C. After 5 seconds, the

date will be displayed again.

Multi-color LCD display

The LCD display backlight has a total of 7 colors, which are displayed in sequence. You can

choose to display one color only by pressing the COLOR button when the desired backlight

color is being displayed. Press this button again to return to automatic color changing.

GB-5

RADIO OPERATION

Listening to the FM radio

1. Press the button to turn on the unit. The radio on LED lights up.

2. Turn the dial to receive an FM station. TUNING

3. Adjust the volume level by turning the VOLUME dial.

4. To turn off the radio, press the button to go to standby mode.

Note: Extend and position the FM antenna to achieve optimum reception.

Connecting headphones

Plug the headphones (not supplied) into the headphones jack at the back of the main unit for

private listening. The speaker output will be shut off automatically.

MAINTENANCE

Care and maintenance

To clean the unit, unplug it and wipe off dust and stains with a soft cloth moistened with a mild

soap and water solution only. Do not use benzene, thinner or similar chemicals to clean the

cabinet.

If at any time in the future you should need to dispose of this product, please note that waste

electrical products should not be disposed of with household waste. Please recycle where

facilities exist. Check with your local authority or retailer for recycling advice (Waste Electrical

and Electronic Equipment Directive).

TECHNICAL SPECIFICATIONS

Temperature Measurable range 0 – 50 °C +/- 1°C

Radio

Tuning range FM 87.5 – 108 MHz

Antenna FM wire antenna

General

Output power 100 mW

Power consumption 2.3 W

Speaker 1” diameter, 8 Ohm impedance

Power source (AC/DC adapter) Input: AC 230V ~ 50Hz, output:

Clock back up battery 1 x lithium battery CR2025 (not supplied)

Dimension 58 (L) x 58 (W) x 122 (H) mm

Weight 0.25 Kg

Note: Due to continuing improvements, the technical specifications are subject to change

without notice.

Product specificaties

Merk:	Scott
Categorie:	Radio
Model:	CMX-130
Kleur van het product:	Zwart, zilver
Ingebouwd display:	Ja
Gewicht:	250 g
Breedte:	580 mm
Diepte:	580 mm
Hoogte:	122 mm
Gewicht verpakking:	500 g
Breedte verpakking:	155 mm
Diepte verpakking:	118 mm
Hoogte verpakking:	150 mm
Touchscreen:	Nee
Ethernet LAN:	Nee
Inclusief AC-adapter:	Ja
Waarschuwingssignaal:	Ja
Agenda:	Ja
Snooze functie:	Ja
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	0.1 W
Aantal ingebouwde luidsprekers:	1
Ondersteund aantal accu's/batterijen:	1
Volumeregeling:	Draaiknop
Hoofdtelefoonuitgangen:	1
Aansluiting voor netstroomadapter:	Ja
Soort tuner:	Analoog
Ingangsspanning:	230 V
Wekker:	Ja
Diameter driver subwoofer (imperiaal):	1 "
MP3 afspelen:	Nee
Ondersteunde frequentiebanden:	FM
Alarmen:	2
Radio:	Klok
Apple docking-compatibiliteit:	Niet ondersteund
FM-band:	87.5 - 108 MHz
PLL-synthesizer:	Nee
Afstandsbediening inbegrepen:	Nee
Wifi:	Nee
AC-ingangsfrequentie:	50 Hz
Stroomverbruik (typisch):	2.3 W
Slaaptimer:	Ja
Batterijtechnologie:	Lithium
Type beeldscherm:	LCD