Scarlett SC-HC63C107 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Scarlett SC-HC63C107 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
МАШИНКА ДЛЯ СТРИЖКИ
ВОЛОС
scarlett.ru
РУКОВОДСТВО
ПО ЭКСПЛУАТАЦИИ
SC-HC63C107
2
IM2024
INSTRUCTION MANUAL
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
ПАЙДАЛАНУ ЖӨНІНДЕГІ НҰСҚАУЛЫҚ
ENG HAIR CLIPPER SET............3
RUS МАШИНКА ДЛЯ СТРИЖКИ ВОЛОС........4
KAZ ШАШТАРДЫҢ ҚЫРҚУЫНА АРНАЛҒАН МӘШІНКЕ...........6
ENG DESCRIPTION
1. Blades
2. On/o switch (0/1)
3. LCD display
4. Power connector
5. 4 removable combs (1/3/5/7 mm)
6. Oil
7. Cleaning brush
8. USB cable
KAZ СИПАТТАМА RUS УСТРОЙСТВО ИЗДЕЛИЯ
1. Пышақтар
2. Қосу/өшіру түймесі (0/1)
3. LCD дисплейі
4. Қорек бакын қосуға арналған
ағытпа
5. 4 алынбалы тарақ (1/3/5/7 мм)
6. Майсауыт
7. Пышақты тазалауға арналған
щетка
8. Зарядтауға арналған бау
1. Лезвия
2. Переключатель ON/OFF (0/1)
3. LCD дисплей
4. Разъем для подключения питания
5. 4 съемных гребня (1/3/5/7 мм)
6. Масленка
7. Щеточка для чистки лезвий
8. USB шнур
Питание прибора DC 5 V 1000 mA 5 W 0.12 / 0.38 kg
mm
42
35
152
1
2
3
4
5 6 7 8
3
ENG
IM2024 SC-HC63C107
ENG INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Please read this instruction manual carefully before use and keep in a safe place for future reference.
Before switching on the appliance for the rst time please check if the technical specications indicated on the unit
correspond to the mains parameters.
For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than
described in this instruction manual.
Do not use outdoors.
Always unplug the appliance from the power supply before cleaning and when not in use.
To prevent risk of electric shock and re, do not immerse the appliance in water or any other liquids.
Do not take this product to a bathroom or use near water.
The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for
person with lack of life experience or knowledge, if only they are under supervision or have been instructed about
the use of the unit by responsible person.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Сleaning and user maintenance
shall not be made by children without supervision.
Children must be under control in order not to be allowed to play with the appliance.Do not leave the appliance
switched on when not in use.
Do not use other attachments than those supplied.
Do not operate after malfunction or cord damage.
If the power cord is damaged, it must be replaced with a special cord obtained from the manufacturer or a service
center.
Never try to repair this appliance by yourself. In case of failure, contact the nearest seller.
Keep the cord away from sharp edges and hot surfaces.
Do not place or store the appliance where it can fall or be pulled into a tub or sink.
Do not pull, twist, or wrap the power cord around the appliance.
Never insert any objects into openings in the appliance housing.
Do not put operating appliance on any surface, it may cause injury or damage.
Do not use the appliance with damaged comb, or with teeth missing from the blades as injury may occur.
NOTE: KEEP THE BLADES OILED.
The instrument must be powered only by a safe, ultra-low voltage marked on the instrument.
Do not use the hair clipper when the skin is infected.
Do not use the hair clipper on animals.
If the product has been exposed to temperatures below 0oC for some time it should be kept at room temperature
for at least 2 hours before turning it on.
The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless
such changes inuence signicantly the product safety, performance, and functions.
Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the
following format XX.XXXX where rst two gures XX is the month of production, and following four gures XXXX is
the year of production.
PREPARATION
The device is designed for cutting hair.
The blades of the machine should thoroughly lubricated before the rst use.
The battery must be fully discharged and charged. The charging time is 1.5 hours. A full battery charge lasts for 1.5
hours of operation. Recharge the battery at least once every 6 months, even if the machine is not in use. You can
use the machine while recharging.
The appliance does not run from the mains when the battery is empty.
Make sure the appliance is switched o during charging, in order to avoid damaging the surrounding area and other
objects.
When charging for the rst time, leave the clipper to charge continuously for 15 hours. Subsequent charges
will reduce times.
Once the clipper is completely charged, discharge it through normal use. Then recharge to full capacity. Maximum
battery capacity will only be reached after several charging/discharging cycles.
Discharge the battery completely twice a year by letting the motor run until it stops. Then fully recharge the battery.
The machine can be charged using the charging cord. Connect the USB input of the cord to the USB port, and the
other end to the connector for connecting the power cord on the device.
The battery charge level is shown on the device display (0 is the minimum charge level, 99 is the maximum charge
level).
The red indicator on the display will light solidly, indicating the charging process.
OPERATION
Hold detachable comb and carefully slide arms into corresponding grooves until click. Take the detachable comb,
put its front part on the blades and then press its back part until it clicks.
There are 4 detachable combs included in the delivery set - 1 mm, 3 mm, 5 mm, 7 mm
You may also use the clipper without the attachment (the length of the blades is 0.5 mm)
To turn on the machine, slide the power switch up («1» position).
At the end of the operation, turn o the machine by sliding the power switch down («0» position).
REPLACEMENT OF THE COMB ATTACHMENT
Turn o the machine.
Turn the machine upside down.
To remove the comb from the cutting unit, carefully remove its back part from the device. Then slide the comb from
the cutting unit.
To attach the ocomb to the cutting block, slide the front part of the protection onto the teeth of the cutting block.
Then press down on the back part of the protection until it clicks.


Product specificaties

Merk: Scarlett
Categorie: Niet gecategoriseerd
Model: SC-HC63C107

Heb je hulp nodig?

Als je hulp nodig hebt met Scarlett SC-HC63C107 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Scarlett

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd