Saturn ST-FP0053 Handleiding

Saturn Blenders ST-FP0053

Lees hieronder de 📖 handleiding in het Nederlandse voor Saturn ST-FP0053 (21 pagina's) in de categorie Blenders. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
ST-FP0053
BLENDER
БЛЕНДЕР
БЛЕНДЕР
3
GB
BLENDER
Dear Buyer!
We congratulate you on having
bought the device under trade name
“Saturn. We are sure that our
devices will become faithful and
reliable assistance in your
housekeeping.
Avoid extreme temperature changes.
Rapid temperature change (e.g. when
the unit is moved from freezing
temperature to a warm room) may
cause condensation inside the unit
and a malfunction when it is switched
on. In this case leave the unit at room
temperature for at least 1.5 hours
before switching it on.
If the unit has been in transit, leave it
indoors for at least 1.5 hours before
starting operation.
General Description
1. Variable speed regulator
2. Low speed button
3. High speed button
4. Motor unit
5. Release buttons
6. Blender shaft
7. Whisk coupling unit
8. Whisk
9. Measuring cup with lid
10. Pusher
11. Processor lid
12. Filling tube
13. Coupling for motor part
14. Bowl
15. Chopper blade
16. Blade support
17. Thin slicing/shredding disc
18. Thick slicing/shredding disc
19. Grinder disc for potato
Important
Never immerse the motor unit and whisk
coupling unit in water or any other fluid,
not rinse it under the tap. Use only a
moist cloth to clean them.
¨ Check if the voltage indicated on the
appliance corresponds to the local mains
voltage before you connect the appliance.
The outlet must be grounded. Otherwise,
the use of the device is prohibited.
¨ Do not use the appliance if its
component parts (power supply cord,
plug, etc.) are damaged. Do not attempt
to repair the appliance yourself. Contact
an authorized service center for qualified
inspection and repair.
2
4
¨ Never let the appliance run
unattended.
¨ This appliance is intended for
household use only.
¨ This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety. Not recommended for
usage by children at the age of 14.
¨ Especially when operating the hand
blender attachment in hot liquids, do not
immerse the blender shaft into-or remove
it from the liquid while the appliance is
switched on.
¨ Children should be supervised to
ensure that they do not play with the
appliance.
¨ Do not touch the blades, especially
when the appliance is plugged in. The
blades are very sharp.
¨ If the blades get stuck, unplug the
appliance before you remove the
ingredients that block the blades.
¨ Always unplug the appliance when it
is left unattended and before you
assemble, disassemble, clean, store,
change accessories or approach parts that
move during use.
¨ Care should be taken when handling
the sharp cutting blades, emptying the
bowl and during cleaning.
¨ Service life – 2 years
Setting the speed
When activating switch, the processing
speed corresponds to the setting of the
variable speed regulator. The higher the
speed setting, the faster and finer the
chopping results will be.
For maximum processing speed, press the
turbo switch. You many also use the turbo
switch for instant powerful pulses without
having to manipulate the speed regulator.
How to operate your hand blender
The hand blender is intended for:
- blending liquids, e.g. dairy products,
sauces, fruit juices, soups, mixed drinks
and shakes.
- mixing soft ingredients, e.g.
- pureeing cooked ingredients, e.g. for
making baby food.
1. Attach the blender bar to the motor
unit (‘click’).
2. Immerse the blade guard
completely in the ingredients.
3. Pressing the normal or turbo speed
button to switch on the appliance.
4. Move the appliance slowly up and
down and in circles to blend the
ingredient.
When blending directly in the saucepan
while cooking, take the pan from the stove
first to protect the appliance from
overheating.
How to use you chopper
The chopper is intended for chopping
meat, cheese, onions, herbs, garlic,
carrots, walnuts, hazelnuts, almonds etc.
For chopping hard goods, use the turbo
switch.
Do not chop extremely hard food, such as
nutmeg, coffee beans and grains.
Before chopping
¨ Pre-cut meat, cheese, onions, garlic,
carrots, chillies.
¨ Remove stalks from herbs, un-shell
nuts
¨ Remove bones, tendons and gristle
from meat.
1. Place the blade on the centre pin of
the bowl and give it a turn to lock into
place.
2. Put the ingredients in the chopper
bowl.
3. Put the food processor lid onto the
chopper bowl. Turn the lid clockwise to
lock it.
4. Insert the motor unit into the
coupling unit until it locks.
5. Pressing the normal or turbo speed
button to switch the appliance.
6. After use, press release button to
remove the motor unit.
7. Turn the lid anti-clockwise to unlatch
it and lift it up.
8. Carefully take out the blade by
turning and pulling it, before removing the
processed food.
5
Mixing light dough
Using the chopper blade, you may also
mix light dough like a pancake batter or a
cake mixture based on up to 250g flour.
For a pancake batter, for instance, first
pour liquids into the bowl, then add flour
and finally eggs. Pressing the turbo
switch, mix the batter until smooth.
Slicing/shredding/grinder for potato
Use the slicing disc, you can slice
cucumbers, onions, mushrooms, apples,
carrots, radishes, raw potatoes,
courgettes, cabbage.
Using the shredding disc, you can shred
apples, carrots, raw potatoes, beetroot,
cabbage, cheese (soft to medium).
Use the grinder disc, you can grind potato.
1. Place the blade support on the centre
pin of the bowl, place
slicing/shredding/grinder disc into blade
support and give it a turn to lock into
place.
2. Attach the food processor lid onto the
bowl. Turn it clockwise to lock the lid.
3. Insert the motor unit into the coupling
unit until it locks.
4. Fill the food to be processed into the
filling tube. Never reach into the filling
tube when the appliance is switched on.
Always use the pusher to feed in food.
5. Pressing the normal or turbo speed
button to switch the appliance.
The pusher tips and warning
Do not exert too much pressure on the
pusher when you press ingredients down
the feed tube.
There are two kinds of pusher (a small
one and a big one) for this appliance:
1. Use the big pusher to push big blocks
of ingredients into the processing cup.
2. For slim material (such as ham,
cucumber, carrot etc.), put the material
trough the hole of big pusher, use the
small pusher to push it. The small pusher
can be taken out of the big pusher by
turning it in an anti-clockwise direction.
3. Pre-cut large ingredients to make
them fit into the feed tube.
4. Fill the feed tube evenly for the best
results.
Whisk
The whisk is intended for whipping cream,
whisking egg whites, desserts etc.
1. Connect the whisk to the whisk
coupling unit.
2. Connect the coupling unit to the
motor unit.
3. Put the ingredients in a bowl (Use a
large and deep bowl for best result).
4. Immerse the whisk completely in the
ingredients. To avoid splashing, start
processing at normal speed.
Care and cleaning
¨ Unplug the appliance before cleaning.
¨ Clean the motor unit and the whisk
coupling unit with a damp cloth only. The
processor lid can be cleaned under
running water, but do not immerse it in
water, nor clean it in a dishwasher.
¨ All other parts can be cleaned in the
dishwasher.
¨ When processing foods with color
(e.g. carrots), the plastic parts of the
appliance may become discolored. Wipe
these parts with vegetable oil before
cleaning them.
Technical Data:
Power: 800 W
Rated Voltage: 220-230 V
Rated Frequency: 50 Hz
Rated Current: 3.63 А
Set
Blender 1
Chopping blade 1
Bowl (1750 ml) 1
Whisk 1
Measure cup (600 ml) 1
Disk 3
Instruction manual with
warranty book 1
Package 1
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the
environment!
Please remember to respect
the local regulations: hand in
the non-working electrical
equipment to an appropriate
waste disposal center.
The manufacturer
reserves the right to change the
specification and design of goods.


Product specificaties

Merk: Saturn
Categorie: Blenders
Model: ST-FP0053

Heb je hulp nodig?

Als je hulp nodig hebt met Saturn ST-FP0053 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Blenders Saturn

Handleiding Blenders

Nieuwste handleidingen voor Blenders