Satel AXD-200 Handleiding

Satel Luchtbevochtiger AXD-200

Lees hieronder de 📖 handleiding in het Nederlandse voor Satel AXD-200 (12 pagina's) in de categorie Luchtbevochtiger. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

AXD-200

Wireless multipurpose detector

Firmware version axd-20 03/ 1.00 0_en 21

SATEL sp. z o.o. ul. Budowlanych 66 - POLAND • • 80 298 Gdańsk •

tel. +48 58 320 94 00

www.satel.eu

IMPORTANT

The device should be installed by qualied personnel.

Prior to installation, please read carefully this manual.

Changes, modications or repairs not authorized by the manufacturer shall void your rights

under the warranty.

The rating plate of the device is located on the enclosure base.

SATEL aims to continually improve the quality of its products, which may result in changes in

their technical specications and software. Current information about the changes being

introduced is available on our website.

Please visit us at:

https://support.satel.eu

Hereby, SATEL sp. z o.o. declares that the radio equipment type AXD-200 is in

compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity

is available at the following internet address: www.satel.eu/ce

In the EU, th radio equipment is only permitted to operate in the 868 MHz frequency is

band.

The following symbols may be used in this manual:

- note,

- caution.

The AXD-200 detector is designed for operation within the ABAX 2 / ABAX two-way wireless

system. It is a multipurpose device that can be used as magnetic contact, shock,

reorientation, temperature or ood detector. You should select the type of detector before

adding it to the system (see “Selecting detector type”). Table 1 shows how the detector is

identied in the wireless system, depending on the selected type.

Detector name in the system

Detector type

ABAX 2

ABAX

AMD- 200

AMD- 100

Magnetic contact

AMD- 201

AMD- 101

Dual channel magnetic contact

AMD- 202

AMD- 102

Magnetic contact with input for roller shutter

detector

AVD- 200

AVD- 100

Shock detector and magnetic contact

ARD- 200

ARD- 100

Reorientation detector

ATD-200

ATD-100

Temperature detector

AFD- 200

AFD- 100

Water ood detector

Table 1.

The detector with factory default settings is identied in the ABAX 2 system as AMD-200, and

in the ABAX system as AMD- 100.

This manual applies to the detector with rmware version 1.00, which is supported by:

 ABAX 2:

– ACU-220 / ACU-280 controller,

– ARU-200 repeater.

 ABAX:

– ACU-120 / ACU-270 controller (rmware version 5.04 or newer),

– ARU-100 repeater (rmware version 2.02 or newer),

– INTEGRA 128-WRL control panel (rmware version 1.19 or newer and rmware

version of processor used to operate ABAX system 3.10 or newer).

The temperature detector (ATD-200) is not supported by the controller connected to

the VERSA / VERSA Plus / VERSA IP control panel.

1 Features

 Possibility to select the type of detector before adding it to the system.

 Encrypted two-way radio communication in the 868 MHz / MHz frequency band (AES 915

standard for the ABAX 2 system).

 Transmission channel diversity 4 channels for automatic selection of the one that will –

enable transmission without interference with other signals in the 868 MHz / MHz 915

frequency band (ABAX 2 system only).

 Remote update of detector rmware (ABAX 2 system only).

 Remote conguration.

 Built-in temperature sensor (temperature measurement range from - 10°C to +55°C).

Product specificaties

Merk:	Satel
Categorie:	Luchtbevochtiger
Model:	AXD-200
Gewicht:	59 g
Breedte:	20 mm
Diepte:	102 mm
Hoogte:	23 mm
Soort:	Vrijstaand
Connectiviteitstechnologie:	Draadloos
Accu/Batterij voltage:	3 V
Nauwkeurigheid:	1 procent
Ondersteund aantal accu's/batterijen:	1
Type beeldsensor:	Temperatuursensor
Bedoeld voor:	Binnen
Meetbereik temperatuur:	-10 - 55 °C
Bedrijfstemperatuur (T-T):	-10 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 93 procent
Type batterij:	CR123A