Saro KEVIN Handleiding

Saro Spoelbak KEVIN

Lees hieronder de 📖 handleiding in het Nederlandse voor Saro KEVIN (2 pagina's) in de categorie Spoelbak. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

info@saro.de

Installation Instructions

Hand Wash Basin

Model KEVIN

Order no. 353-1005

1. General Information

• Read these installation instructions carefully as they contain important information for the

installation of the hand wash basin.

• Should you pass the hand wash basin to a third party, these installation instructions

should be handed over.

• As soon as you have unpacked the hand wash basin, check, whether everything is in a

faultless condition. Should anything be damaged, inform your dealer.

• Dispose the packing material according to the local regulations. All the packaging items

(plastic bags, cardboard, polystyrene foam, nails, etc..) should not be left within reach of

children, because they are potential sources of danger.

• The manufacturer/dealer cannot be made responsible for damages, which arise through

not observing these installation instructions.

2. Installation

• The installation should be only installed by a qualied specialist according to the valid

standards.

• Remove all protection and packing materials.

• Check the hand wash basin for any damages. If something is damaged, inform your

dealer.

Assembly of the hand wash basin

a) Install the siphon at the basin discharge.

b) Put the swan neck/water discharge into the hole, which is located above the right

basin edge.

c) Screw the exible hose (under the basin edge) on the swan neck.

d) Fix the basin with the attached support and the screws in horizontal position on the

wall.

e) Pull the exible hose over the crossbar in the forward position.

f) Screw the valve to the hose and consider the direction of the water ow. On the valve

is for this specially an arrow (see fig. 1). If you do not consider it, the valve will not

close correctly.

g) Lead the valve into the drilling, which is in the crossbar, and lock the valve with the

lock nut.

h) If you need the mixing valve for cold/warm water mixture, then turn the mixer on the

pressure control valve.

i) The delivery contains a liquid soap dispenser, which you can fasten by using the

double-sided adhesive, attached on the rear wall. Please clean the rear wall before,

so that it is completely grease-free.

j) The connection to the house water pipe and also the discharge should be installed by

a plumber. The accessories for these are not encluded in the delivery.

Page 1

Installation Instructions Hand Wash Basin Model KEVIN

Fig. 1

Fig. 2

3. Cleaning

• For hygienical reasons the hand wash basin should be cleaned daily.

• Clean everything with a damp cloth and some commercial cleaning detergent.

Afterwards dry it carefully.

• You can clean the hand wash basin with a high-grade steel cleaner also.

• Clean regularly the siphon.

4. Technical and other data

• Material: Stainless steel AISI 304

• Movable mixspout

• With setback ap

• Splashboard

• Connection to the waterpipe – ½“

• Siphon inscluded

• Dimensions: W 400 x D 340 x H 595 mm

• Weight: net 6,5 kg - brut 7,5 kg

Page 2

Please consider the direction of

the water ow (see arrow)!

Inlet

Cold- and/or warm water

Inlet

Cold- and/or warm water

Water discharge opening to the valve

Mixing valve

Cautio

Incorrect connection leads inevitably to

the destruction of the valve.

Product specificaties

Merk:	Saro
Categorie:	Spoelbak
Model:	KEVIN
Kleur van het product:	Roestvrijstaal
Gewicht:	8000 g
Breedte:	400 mm
Diepte:	595 mm
Lengte:	340 mm
Soort wastafel:	Spoelbak voor muurmontage
Vorm gootsteen:	Rechthoekig
Materiaal gootsteen:	Roestvrijstaal
Aantal gootstenen:	1 kommen
Aanrecht:	Nee
Kraan inclusief:	Ja
Sifon inclusief:	Ja