Sanitaire SC6001 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sanitaire SC6001 (24 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 59 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
Commercial
Lightweight
Floor Machine
Model SC6001
Owners Guide
Index
Important Safeguards ..................2
Service Information .....................2
Grounding Instructions ................3
Operation/Accessories ................3
Remove From Carton ..................4
Brush & Drive Block Installation ..5
Adjustments .................................5
Controls .......................................6
Guidelines For Operation ............6
Cord Storage ...............................7
Clean Up And Storage .................7
Warranty ......................................9
For location of nearest Eureka/Sanitaire
Authorized Warranty Station or service
information call 1-800-800-8975.
*En Mexico llame al (55) 5343-4384.
www.sanitairevac.com
Please Retain
We suggest you record the model, type and serial numbers
below. They are located on the silver rating plate on your
cleaner. For prompt and complete service information, always
refer to these numbers when inquiring about service.
Model & Type___________________________
Serial No. ______________________
It is also important to keep your receipt as proof of date of
purchase.
Part No. 75577_Rev1 ©2005 Electrolux Home Care Products Ltd. Printed in U.S.A.(5/05)
2
To reduce the risk of fire, electric shock, or injury:
Your machine is equipped with a safety switch lock and
power switch triggers designed for your safety. Do not
attempt to bypass or defeat the safety switch lock. Never
use any device to lock the power switch triggers in the “ON”
position.
Do not leave the floor machine when plugged in. Turn off
the switch and unplug the electrical cord when not in use
and before servicing or changing the brushes or pads.
Do not allow the machine to be used as a toy. Close
attention is necessary when used near children.
Do not leave the machine connected to an electrical outlet
unattended.
Use only as described in this manual. Use only manufacturers
recommended attachments.
Do not use with a damaged cord or plug. If the machine is
not working as it should, has been dropped, damaged, or
left outdoors return it to a service center before using.
Use care to keep the electrical supply cord from contacting
the rotating brush or drive block.
Do not pull, close a door on, or pull the cord around sharp
edges or corners. Keep the cord away from heated surfaces.
Connect to properly grounded (3-wire) outlet only refer to
Grounding Instructions, Pg 3.
Do not use extensions cords or outlets with inadequate
current carrying capacity.
Turn off all controls before unplugging.
Do not unplug by pulling on cord. To unplug, grasp the plug,
not the cord.
Do not handle the plug oroor machine with wet hands.
Wind the cord no tighter than is necessary to retain it during
storage. Refer to Cord Storage, Page 7.
Use extra care when working near stairs.
Do not use in conjunction with flammable or combustible
liquids such as gasoline, or use in areas where explosive
vapor or dust may be present.
Store your floor machine indoors in a cool, dry area.
Keep your work area well lighted.
Use indoors only.
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS FLOOR FINISHING MACHINE.
WARNING
SAVE THESE INSTRUCTIONS
SERVICE INFORMATION
The instructions in this booklet serve as a guide to routine
maintenance. For additional service information, telephone our
toll free number for the nearest Eureka/Sanitaire Authorized
Warranty Station. You should know the model, type and
serial number or date code when you call:
USA: 1-800-800-8975
Mexico: (55) 5343-4384
Canada: 1-800-800-8975
If you prefer, you can write to Electrolux Home Care Products
North America, Consumer Service, P.O. Box 3900, Peoria,
Illinois 61612, USA. In Canada, write to Electrolux Home
Care Products, 866 Langs Drive, Cambridge, Ontario N3H
2N7. Refer to Sanitaire Limited Warranty for complete service
information.
DO NOT OIL the motor or the belt drive. The
motor and belt drive are permanently sealed and
lubricated.
MACHINE SIZE BRUSH DIAMETER
13” 12”
3
Grounding Instructions
This appliance must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock. This
appliance is equipped with a cord having an equipment-
grounding conductor and grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and
ordinances.
DANGER
Improper connection of an equipment-grounding conductor
can result in risk of electric shock. Check with a qualified
electrician or service person if you are in doubt as to whether
the outlet is properly grounded. Do not modify the plug
provided with the appliance. If it will not fit the outlet, have
proper outlet installed by a qualified technician.
This appliance is for use on a nominal 120 volt circuit and
has a grounding plug that looks like the plug illustrated in
Figure 1. A temporary adapter which looks like the adapter
illustrated in Figure 2 may be used to connect this plug to a
two-pole receptacle, as shown, if a properly grounded outlet
is not available. The temporary adapter should be used only
until a properly grounded outlet, Figure 1, can be installed
by a qualified electrician. The green colored rigid ear, lug, or
the like extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box
cover. Whenever the adapter is used, it must be held in place
by a metal screw.
For floor finishing machines rated 150-250 volts:
If the machine is provided with an attachment plug cap as
shown in Fig. 3, it is intended for use on a 240 volt (nominal)
circuit. No adapter is available for this application.
NOTE: In Canada, the use of a temporary adapter is not
permitted by the Canadian Electrical Code.
OPERATION/ACCESSORIES
Choosing the Right Brush and Drive Block
Your floor machine is packed complete and ready for use after
you install a brush or drive block.
Your oor machine is designed to be used for many different
floor care applications. Make sure you use the correct brush
or pad for the type of job you want to perform. (Accessories
are available from the dealer from whom the oor machine
was purchased.)
When ordering brushes or drive blocks, refer to this chart and
specify correct brush or block diameter when ordering.
FIGURE 1
FIGURE 2
FIGURE 3
GROUN D ED
OUTLET BOX
Plug Grounding Pin
Grounding Tab
Metal Screw
Adapter
Plug Grounding Pin


Product specificaties

Merk: Sanitaire
Categorie: Stofzuiger
Model: SC6001

Heb je hulp nodig?

Als je hulp nodig hebt met Sanitaire SC6001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Stofzuiger Sanitaire

Handleiding Stofzuiger

Nieuwste handleidingen voor Stofzuiger