Sani-Lav ES2-503L Handleiding

Sani-Lav Spoelbak ES2-503L

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Sani-Lav ES2-503L (9 pagina's) in de categorie Spoelbak. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
1
A C O R B AT T E R Y P O WERE D
S I N K W I T H E L E C T R O N I C S E N S O R
Operating Manual for Hands-Free Floor Mount Stainless Steel Sink
AC Models ES2-503L and ES2-503L-0.5
Battery Models ESB2-503L and ESB2-503L-0.5
of Domestic and Foreign Parts
Columbia does not recommend use with harsh chemicals.
Product Compliance
NSF/ANSI 2 Food Equipment, NSF/ANSI 372 Lead-Free Compliant, ASME A112.18.1
2
A C O R B AT T E R Y P O W E R E D
COLUMBIA SPECIFICATIONS S I N K W I T H E L E C T R O N I C S E N S O R
800.626.2117 columbiasinks.com info@columbiasinks.com
Β©2021 Columbia Products
Installation Instructions
Step 1
1. Establish sink location on the wall.
2. Measure a recommended 41.5” from finished floor and draw a level line which will be the top
edge of the wall mounting bracket.
3. Hold the wall mounting bracket against the wall and mark the wall where the holes are. Drill
holes and secure bracket to the wall as shown in illustration A. Screws are not provided.
Step 2
1. Install faucet assembly to the sink following the instructions provided with sensor unit.
2. Install strainer assembly.
3. Install mixing check valve to inlet filter on faucet.
Step 3
1. Position the sink onto wall bracket.
2. Mark holes for fastening side mounting brackets as shown in illustration B.
3. Remove sink from the wall bracket.
4. Drill holes in wall for securing sink to wall.
5. Hang sink on the wall bracket and secure to the wall.
Step 4
1. Connect waste line or drain pipe to strainer assembly.
2. Connect hot and cold water from the source to the mixing check valve.
3. Remove aerator from the spout assembly and flush water system.
4. Check connections for leaks.
5. Replace aerator onto the spout.
Parts List
(1) Sink bowl
(1) Pedestal base
(6) Nuts and washers to attach bowl to pedestal base
(1) AC or battery powered sensor faucet assembly
(1) Strainer assembly with basket
(1) Mixing check valve
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds),
Lead, and Phthalates (DEHP) which are known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
NOTE: Lead content originates from Brass components in valves and faucets and is certied under
NSF/ANSI 372 as containing less than 0.25% lead in wetted surfaces.
Notice for California Consumers
Tools Required
Tape measure
Adjustable wrench
Drill motor and drill bits
Pipe wrench
Level
Safety glasses
Screw drivers: phillips and standard
Pencil
Socket wrench
Go to for more information on replacement parts and installation videos.columbiasinks.com
Illustration A
Illustration B
3
A C O R B AT T E R Y P O W E R E D
COLUMBIA SPECIFICATIONS S I N K W I T H E L E C T R O N I C S E N S O R
800.626.2117 columbiasinks.com info@columbiasinks.com
Β©2021 Columbia Products
16.5”
(419mm)
21”
(533mm)
19” (483mm)
17” (432mm)
2” drain hole
9.5”
(241mm)
7”
(197mm)
25” (635mm)
1.25” R
32mm
Hole Configuration
Front Side
Top
5.5” (140 mm)
18”
(457mm)
14”
(356mm)
2” (51mm)
9.5”
(241mm) 9.5”
(241mm)
6” (152mm)
9.5” (241mm)
.875” (22mm)
dia. key hole
7.5” (191mm)
45ΒΊ
Floor Mounting Detail
.375” dia. Floor
Mounting Holes
4.25” on Center
6” (152.4mm)
0.875” (22.225mm)
11.375” (288.925mm) 4.25” (107.95mm)


Product specificaties

Merk: Sani-Lav
Categorie: Spoelbak
Model: ES2-503L

Heb je hulp nodig?

Als je hulp nodig hebt met Sani-Lav ES2-503L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden